EN 13253:2000/A1:2005
(Amendment)Geotextiles and geotextile-related products - Required characteristics for use in external erosion control systems
Geotextiles and geotextile-related products - Required characteristics for use in external erosion control systems
This European Standard specifies the relevant characteristics of geotextiles and geotextile-related products used in erosion control works for preventing the migration of fine-graded material into layers of coarser material due to alternating hydraulic gradients. This standard also specifies the appropriate test methods to determine these characteristics. This standard covers applications in coastal protection and bank revetment. This standard does not cover surface erosion, where the geotextile or geotextile-related product is located at the surface. The intended use of these geotextiles or geotextile-related products is to fulfil one or more of the following functions: filtration, separation and reinforcement. The separation function is always used in conjunction with filtration or reinforcement, accordingly separation will never be specified alone. This standard is not applicable to geomembranes. This standard provides for the evaluation of conformity of the product to this European Standard and for factory production control procedures. This standard defines requirements to be met by manufacturers and distributors with regard to the presentation of product properties.NOTE 1 Particular application cases or national specifications may contain requirements regarding additional properties and - preferably standardised - test methods, if they are
technically relevant and not conflicting with European Standards. NOTE 2 This European Standard may be used to derive design values by taking into account factors within the context of the definitions given in Eurocode 7 (ENV 1997-1), e.g. factors of safety. The design life of the product should be determined, since its function may be temporary, as a construction expediency, or permanent, for the lifetime of the structure.
Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die Anwendung in externen Erosionsschutzanlagen
Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les ouvrages de lutte contre l'érosion (protection côtière et revêtement de berge)
Geotekstilije in geotekstilijam sorodni izdelki - Zahtevane lastnosti za uporabo pri nadzoru zunanje erozije
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13253:2001/A1:2005
01-maj-2005
Geotekstilije in geotekstilijam sorodni izdelki - Zahtevane lastnosti za uporabo pri
nadzoru zunanje erozije
Geotextiles and geotextile-related products - Required characteristics for use in external
erosion control systems
Geotextilien und geotextilverwandte Produkte - Geforderte Eigenschaften für die
Anwendung in externen Erosionsschutzanlagen
Géotextiles et produits apparentés - Caractéristiques requises pour l'utilisation dans les
ouvrages de lutte contre l'érosion (protection côtiere et revetement de berge)
Ta slovenski standard je istoveten z: EN 13253:2000/A1:2005
ICS:
59.080.70 Geotekstilije Geotextiles
SIST EN 13253:2001/A1:2005 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 13253:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 59.080.70
English version
Geotextiles and geotextile-related products - Required
characteristics for use in external erosion control systems
Géotextiles et produits apparentés - Caractéristiques Geotextilien und geotextilverwandte Produkte - Geforderte
requises pour l'utilisation dans les ouvrages de lutte contre Eigenschaften für die Anwendung in externen
l'érosion (protection côtière et revêtement de berge) Erosionsschutzanlagen
This amendment A1 modifies the European Standard EN 13253:2000; it was approved by CEN on 15 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13253:2000/A1:2005: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 13253:2000/A1:2005 (E)
Foreword
This document (EN 13253:2000/A1:2005) has been prepared by Technical Committee CEN/TC 189
"Geosynthetics", the secretariat of which is held by IBN.
This Amendment to the European Standard EN 13253:2000 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and
conflicting national standards shall be withdrawn at the latest by July 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia,
Spain, Sweden, Switzerland and United Kingdom.
2
---------------------- Page: 3 ----------------------
EN 13253:2000/A1:2005 (E)
1 Modification to Clause 2
include reference to:
"ISO 10390:1994 – Soil quality – Determination of pH"
2 Modification to Subclause 5.2, Note 1
replace by:
"This method should not be used for on-site quality control purposes. On-site control procedures are
described in CEN/TR 15019.”
3 Modification to Subclause 5.4
th
add at the end of the 4 paragraph:
"The tasks of the manufacturer shall be described in detail including the type of tests to be performed
and the frequency of these tests (see also Annex A, Clause A.2)."
4 Modification to Subclause 5.4
replace by:
"Inspection of the factory and of the factory production control shall be made not less than once a
year, given constant production conditions, on the provisions contained in Clause 5.4 and Annex A.
The inspection shall include an initial inspection of the factory and a continuous surveillance,
assessment and approval of the factory production control, where required. The single steps of this
inspection are specified in Annex A, Clause A.2"
5 Modification to Annex A
- Rename Annex A (normative) as: Factory Production Control
- Renumber
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.