EN ISO 14555:2014

Welding - Arc stud welding of metallic materials (ISO 14555:2014, Corrected version 2014-06-01)

ISO 14555:2014 covers arc stud welding of metallic materials subject to static and fatigue loading. It specifies requirements that are particular to stud welding, in relation to welding knowledge, quality requirements, welding procedure specification, welding procedure qualification, qualification testing of operators and testing of production welds.
ISO 14555:2014 is appropriate where it is necessary to demonstrate the capability of a manufacturer to produce welded construction of a specified quality.
ISO 14555:2014 has been prepared in a comprehensive manner, with a view to it being used as a reference in contracts. The requirements contained within it can be adopted in full, or partially, if certain requirements are not relevant to a particular construction.

Schweißen - Lichtbogenbolzenschweißen von metallischen Werkstoffen (ISO 14555:2014, korrigierte Fassung 2014-06-01)

Diese Internationale Norm umfasst das Lichtbogenbolzenschweißen von metallischen Werkstoffen unter ruhender und Ermüdungsbeanspruchung. Sie legt die besonderen Anforderungen beim Bolzenschweißen in Bezug auf das schweißtechnische Fachwissen, die Qualitätsanforderungen, die Schweißanweisung, die Qualifizierung des Schweißverfahrens, die Bedienerprüfung und die Prüfung von Fertigungsschweißungen fest.
Diese Internationale Norm ist anzuwenden, wenn der Nachweis des Herstellers zur Erzeugung von geschweißten Konstruktionen einer bestimmten Qualität verlangt wird.
ANMERKUNG      Allgemeine Qualitätsanforderungen für Schmelzschweißungen an metallischen Werkstoffen sind in ISO 3834-1, ISO 3834-2, ISO 3834-3, ISO 3834-4 und ISO 3834-5 festgelegt.
Diese Internationale Norm ist als umfassendes Bezugsdokument für Verträge erarbeitet worden. Die gestellten Anforderungen können vollständig oder teilweise, sofern sie für die betreffende Konstruktion nicht relevant sind, übernommen werden (siehe Anhang

Soudage - Soudage à l'arc des goujons sur les matériaux métalliques (ISO 14555:2014, Version corrigée 2014-06-01)

L'ISO 14555:2014 couvre le soudage à l'arc des goujons en matériau métallique soumis à des chargements statiques et de fatigue. Elle spécifie les exigences particulières au soudage des goujons qui se rapportent aux connaissances en soudage, aux exigences de qualité, au descriptif de mode opératoire de soudage, à la qualification du descriptif de mode opératoire de soudage, aux épreuves de qualification des opérateurs et au contrôle des soudures de production.
L'ISO 14555:2014 est appropriée lorsqu'il est exigé de démontrer la capacité d'un fabricant à produire des fabrications soudées possédant une qualité spécifiée.
L'ISO 14555:2014 a été préparée dans un esprit d'exhaustivité pour lui permettre d'être utilisée comme référence dans les contrats. Les exigences qui sont données peuvent être adoptées en intégralité ou bien certaines d'entre elles peuvent être supprimées si elles ne sont pas pertinentes par rapport à la construction concernée.

Varjenje - Obločno varjenje čepov iz kovinskih materialov (ISO 14555:2014)

EN ISO 14555 zajema оbločno varjenje čepov iz kovinskih materialov, ki so statično ali dinamično obremenjeni. Podaja zahteve, ki veljajo za obločno varjenje, glede znanja o varjenju, zahtev po kakovosti, specifikacij varilnega postopka, kvalifikaciji varilnega postopka, kvalifikacijskem preskušanju operaterjev in preskušanju izdelanih zvarov. Ta mednarodni standard je primeren, kjer je treba pokazati zmogljivost proizvajalca za izdelavo varjene konstrukcije določene kakovosti.

General Information

• Status: Withdrawn
• Publication Date: 22-Apr-2014
• Withdrawal Date: 13-Jun-2017
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 14-Jun-2017
• Ref Project: SIST EN ISO 14555:2014 - Welding - Arc stud welding of metallic materials (ISO 14555:2014)

Relations

• Replaces: EN ISO 14555:2006 - Welding - Arc stud welding of metallic materials (ISO 14555:2006)
• Effective Date: 11-Dec-2010
• Replaced By: EN ISO 14555:2017 - Welding - Arc stud welding of metallic materials (ISO 14555:2017)
• Effective Date: 13-Jan-2016

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2014
1DGRPHãþD
SIST EN ISO 14555:2007
9DUMHQMH2EORþQRYDUMHQMHþHSRYL]NRYLQVNLKPDWHULDORY,62
Welding - Arc stud welding of metallic materials (ISO 14555:2014)
Schweißen - Lichtbogenbolzenschweißen von metallischen Werkstoffen (ISO
14555:2014)
Soudage - Soudage à l'arc des goujons sur les matériaux métalliques (ISO 14555:2014)
Ta slovenski standard je istoveten z: EN ISO 14555:2014
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 14555
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2014
ICS 25.160.10 Supersedes EN ISO 14555:2006
English Version
Welding - Arc stud welding of metallic materials (ISO
14555:2014)
Soudage - Soudage à l'arc des goujons sur les matériaux Schweißen - Lichtbogenbolzenschweißen von metallischen
métalliques (ISO 14555:2014) Werkstoffen (ISO 14555:2014)
This European Standard was approved by CEN on 20 March 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14555:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 14555:2014) has been prepared by Technical Committee ISO/TC 44 “Welding and
allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding and allied processes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at
the latest by October 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14555:2006.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14555:2014 has been approved by CEN as EN ISO 14555:2014 without any modification.

INTERNATIONAL ISO
STANDARD 14555
Third edition
2014‐05‐01
Welding — Arc stud welding of metallic
materials
Soudage — Soudage à l'arc des goujons sur les matériaux métalliques

Reference number
ISO 14555:2014(E)
©
ISO 2014
ISO 14555:2014(E)
©  ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form or by any
means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission.
Permission can be requested from either ISO at the address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved

ISO 14555:2014(E)
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Symbols and abbreviated terms . 4
4.1 Symbols . 4
4.2 Abbreviated terms . 4
5 Technical review . 5
6 Welding personnel . 5
6.1 Stud-welding operators . 5
6.2 Welding coordination . 6
7 Equipment . 6
7.1 Production equipment . 6
7.2 Description of the equipment . 6
7.3 Maintenance . 7
8 Production planning . 7
9 Welding procedure specification (WPS) . 7
9.1 General . 7
9.2 Information related to the manufacturer . 7
9.3 Information related to the parent material . 8
9.4 Welding process . 8
9.5 Joint . 8
9.6 Auxiliaries . 9
9.7 Power source . 9
9.8 Movable fixtures . 9
9.9 Welding variables . 10
9.10 Thermal conditions . 10
9.11 Post-weld heat-treatment . 10
9.12 Non-thermal treatment after welding . 10
10 Welding procedure qualification . 11
10.1 Principles . 11
10.2 Welding procedure tests . 11
10.3 Pre-production tests . 15
10.4 Previous experience . 15
10.5 Welding procedure qualification record (WPQR) . 15
11 Examination and testing . 16
11.1 General . 16
11.2 Visual examination . 16
11.3 Bend testing . 16
11.4 Tensile testing . 20
11.5 Torque test . 23
11.6 Macro examination . 23
11.7 Radiographic examination . 24
11.8 Ring test . 24
ISO 14555:2014(E)
12 Acceptance criteria . 24
12.1 General . 24
12.2 Acceptance criteria for visual examination . 24
12.3 Acceptance criteria for bend testing . 25
12.4 Acceptance criteria for tensile testing . 25
12.5 Acceptance criteria for torque testing .
...