EN 12697-3:2005
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator
This European Standard describes a test method for the recovery of soluble bitumen from bituminous pavement materials in a form suitable for further testing. The procedure is only suitable for the recovery of paving grade bitumens.
Asphalt - Prüfverfahren für Heißasphalt - Teil 3: Rückgewinnung des Bitumens: Rotationsverdampfer
Dieses Dokument legt ein Prüfverfahren fest, mit dem aus Asphalt, der als Straßenbaumaterial verwendet
wird, lösliches Bindemittel in einer zur weiteren Prüfung geeigneten Form zurückzugewinnen ist. Dieses
Verfahren eignet sich nur zur Rückgewinnung von Straßenbaubitumen, für die das in dieser Europäischen
Norm angegebene Verfahren das Referenzverfahren ist. Das Verfahren mit der Fraktionierkolonne (siehe
EN 12697-4) ist das Referenzverfahren für Mischgüter, die flüchtige Bestandteile enthalten, wie z. B. ver-
schnittenes Bitumen.
ANMERKUNG Für die Rückgewinnung polymermodifizierten Bitumens ist der Rotationsverdampfer zu empfehlen.
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 3: Récupération des bitumes : Evaporateur rotatif
La présente Norme européenne décrit une méthode d'essai permettant de récupérer du bitume soluble des matériaux enrobés prélevés sur la chaussée sous une forme se prêtant à des essais complémentaires. La procédure convient uniquement à la récupération de bitumes purs routiers, pour lesquels cette Norme européenne est une méthode de référence. La méthode à la colonne à distiller (voir EN 12697-4) est la méthode de référence pour les mélanges qui contiennent des produits volatils tels que des fluxants.
Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 3. del: Ugotavljanje vsebnosti veziva: rotacijski uparjalnik
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2005
1DGRPHãþD
SIST EN 12697-3:2002
SIST EN 12697-3:2002/AC:2002
GHO %LWXPHQVNH]PHVL±3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVL±
8JRWDYOMDQMHYVHEQRVWLYH]LYD URWDFLMVNLXSDUMDOQLN
Bituminous mixtures - Test methods for hot mix asphalt - Part 3: Bitumen recovery:
Rotary evaporator
Asphalt - Prüfverfahren für Heißasphalt - Teil 3: Rückgewinnung des Bitumens:
Rotationsverdampfer
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 3:
Récupération des bitumes : Evaporateur rotatif
Ta slovenski standard je istoveten z: EN 12697-3:2005
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12697-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 93.080.20 Supersedes EN 12697-3:2000
English version
Bituminous mixtures - Test methods for hot mix asphalt - Part 3:
Bitumen recovery: Rotary evaporator
Mélanges bitumineux - Méthodes d'essai pour mélange Asphalt - Prüfverfahren für Heißasphalt - Teil 3:
hydrocarboné à chaud - Partie 3: Récupération des Rückgewinnung des Bitumens: Rotationsverdampfer
bitumes : évaporateur rotatif
This European Standard was approved by CEN on 8 December 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-3:2005: E
worldwide for CEN national Members.
Contents
Page
Foreword.3
1 Scope .6
2 Normative references .6
3 Terms, definitions and symbols.6
4 Principle.7
5 Apparatus .7
5.1 Apparatus for the extraction of the soluble bitumen.7
5.2 Apparatus for the clarification of the bitumen solution.7
5.3 Distillation apparatus .8
6 Solvent and other materials.9
7 Procedure .9
7.1 Extraction of the bitumen and removal of insoluble matter.9
7.2 Assembling and checking the apparatus for air leaks .10
7.3 Distillation procedure.10
8 Preparation of the bitumen for testing .12
9 Test report .12
10 Precision.13
Bibliography .15
Foreword
This document (EN 12697-3:2005) has been prepared by Technical Committee CEN/TC 227 “Road materials”,
the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the
latest by July 2005.
This European Standard is one of a series of standards as listed below:
EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content.
EN 12697-2, Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size
distribution.
EN 12697-3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary
evaporator.
EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Bitumen recovery:
Fractionating column.
EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the
maximum density.
EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density
of bituminous specimens.
EN 12697-7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density
of bituminous specimens by gamma rays.
EN 12697-8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void
characteristics of bituminous specimens.
EN 12697-9, Bituminous mixtures — Test methods for hot mix asphalt — Part 9: Determination of the
reference density.
EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactability.
EN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the
affinity between aggregates and bitumen.
EN 12697-12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the water
sensitivity of bituminous specimens.
EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature
measurement.
EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content.
EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the
segregation sensitivity.
EN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres.
EN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous
asphalt specimen.
EN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage .
EN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen.
EN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or
Marshall specimens.
EN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate
specimens.
EN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking.
EN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the
indirect tensile strength of bituminous specimens.
EN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue.
prEN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test.
EN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness.
EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling.
EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for
determining binder content, water content and grading.
EN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the
dimensions of a bituminous specimen.
EN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30: Specimen preparation by
impact compactor.
EN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation by
gyratory compactor.
EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction of
bituminous mixtures by a vibratory compactor.
EN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen prepared by
roller compactor.
EN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test.
EN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing.
EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the
thickness of a bituminous pavement.
EN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for the
adhesivity of binder on pre-coated chippings for HRA.
EN 12697-38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment and
calibration.
EN 12697-39, Bituminous mixtures — Test methods for hot mix asphalt — Part 39: Binder content by ignition.
prEN 12697-40, Bituminous mixtures — Test methods for hot mix asphalt — Part 40: In-situ drainability.
prEN 12697-41, Bituminous mixtures — Test methods for hot mix asphalt — Part 41: Resistance to de-icing
fluids.
prEN 12697-42, Bituminous mixtures — Test methods for hot mix asphalt — Part 42: Amount of foreign
matters in reclaimed asphalt.
prEN 12697-43, Bituminous mixtures — Test methods for hot mix asphalt — Part 43: Resistance to fuel.
This European Standard supersedes EN 12697-3:2000.
WARNING — The method described in this European Standard may require the use of
dichloromethane (methylene chloride), 1.1.1 trichlorethane, benzene, trichlorethylene, xylene, toluene,
tetracloroethylene or other solvent capable of dissolving bitumen. These solvents are hazardous to
health and are subject to occupational exposure limits as detailed in relevant legislation and
regulations.
Exposure levels are related to both handling procedures and ventilation provision and it is emphasised that
adequate training should be given to staff employed in the usage of these substances.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.
1 Scope
This document describes a test method for the recovery of soluble bitumen from bituminous pavement
materials in a form suitable for further testing. The procedure is only suitable for the recovery of paving grade
bitumens, for which materials this European Standard is the reference method. The fractionating column
procedure (see EN 12697-4) is the reference method for mixtures containing volatile matter such as cut-back
bitumen.
NOTE For recovery of polymer modified bitumens the rotary evaporator is recommended.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
EN 12594, Bitumen and bituminous binders — Preparation of test samples.
EN 12697-1:2000, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content.
EN 12697-38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Common equipment and
calibration.
3 Terms, definitions and symbols
For the purposes of this document, the terms and definitions given in EN 12697-1:2000 and the following
apply.
3.1
soluble binder content
percentage by mass of extractable binder in an anhydrous sample determined by extracting the binder from
the sample
NOTE Extraction may be followed by binder recovery.
3.2
insoluble binder content
percentage by mass of binder that adheres to the aggregate after extraction
3.3
precision
closeness of agreement between independent test results obtained under stipulated conditions
NOTE 1 Precision depends only on the distribution of random errors and does not relate to the true value or the
specified value.
NOTE 2 The measure of precision is usually expressed in terms of imprecision and computed as a standard deviation
of the test results. Less precision is reflected by a larger standard deviation.
NOTE 3 “Independent test results” means results obtained in a manner not influenced by any previous result on the
same or similar test object. Quantitative measures of precision depend critically on the stipulated conditions. Repeata
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.