Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures

This standard specifies the constituent materials, the composition and the mixing procedure to produce a reference masonry mortar with a prescribed consistence for testing mortar admixtures as defined in EN 934-3. It also describes the determination of the water reduction of the test mix compared to the control mix.

Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 13: Referenz-Baumörtel für die Prüfung von Zusatzmitteln für Mauerwerksmörtel

Diese Norm legt die Bestandteile, die Zusammensetzung und das Mischverfahren für die Herstellung eines Referenz Baumörtels mit Normkonsistenz für die Prüfung von Zusatzmitteln für Mörtel fest, wie sie in EN 934 3 definiert sind. Sie beschreibt auch die Bestimmung der Herabsetzung des Wasseranteils der Prüf-mischung im Vergleich zur Kontrollmischung.

Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 13 : Mortier à maçonner de référence pour les essais menés sur les adjuvants de mortier

La présente norme spécifie les constituants, la composition et la méthode de malaxage pour la confection d’un
mortier à maçonner de référence ayant une consistance prescrite destiné à la réalisation d’essais sur les adjuvants
pour mortiers conformément à l’EN 934-3. Elle décrit également la méthode de détermination de la réduction de la
teneur en eau du mortier adjuvanté par rapport au mortier témoin.

Kemijski dodatki za beton, malto in injekcijsko maso - Metode preskušanja - 13. del: Referenčna malta za zidanje za preskušanje kemijskih dodatkov za malte

General Information

Status
Withdrawn
Publication Date
15-Sep-2009
Withdrawal Date
21-Jun-2011
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
22-Jun-2011
Completion Date
22-Jun-2011

Relations

Buy Standard

Standard
EN 480-13:2009
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2009
1DGRPHãþD
SIST EN 480-13:2003
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVR0HWRGHSUHVNXãDQMD
GHO5HIHUHQþQDPDOWD]D]LGDQMH]DSUHVNXãDQMHNHPLMVNLKGRGDWNRY]DPDOWH
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry
mortar for testing mortar admixtures
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 13: Referenz-
Baumörtel für Prüfung von Zusatzmitteln für Mörtel
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 13 : Mortier à
maçonner de référence pour les essais menés sur les adjuvants de mortier
Ta slovenski standard je istoveten z: EN 480-13:2009
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
91.100.30 Beton in betonski izdelki Concrete and concrete
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 480-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2009
ICS 91.100.10 Supersedes EN 480-13:2002
English Version
Admixtures for concrete, mortar and grout - Test methods - Part
13: Reference masonry mortar for testing mortar admixtures
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Zusatzmittel für Beton, Mörtel und Einpressmörtel -
Partie 13 : Mortier à maçonner de référence pour les essais Prüfverfahren - Teil 13: Referenz-Baumörtel für die Prüfung
menés sur les adjuvants de mortier von Zusatzmitteln für Mörtel
This European Standard was approved by CEN on 10 August 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 480-13:2009: E
worldwide for CEN national Members.

Contents
page
Foreword . 3
1 Scope . 4
2 Normative references . 4
3 Constituent materials . 4
3.1 Cement . 4
3.2 Sand . 4
3.3 Mixing water . 5
4 Reference masonry mortar . 5
5 Production of reference mortar with standard consistence . 5
5.1 Mix proportions . 5
5.2 Mixing procedure . 6
5.3 Mortar for test after standing . 6
5.4 Mortar for test after extended mixing . 6
6 Calculation of water reduction (air entraining/plasticizing admixtures) . 6
7 Test report . 7

Foreword
This document (EN 480-13:2009) has been prepared by Technical Committee CEN/TC 104 “Concrete and related
products”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at the latest by
March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 480-13:2002.
This document has been prepared by Subcommittee 3 (SC 3) of TC 104 "Admixtures for concrete".
The present standard is applicable together with the standards of the EN 480 and EN 934 series.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembou
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.