EN ISO 10563:2017

Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017)

ISO 10563:2017 specifies a method for the determination of the change of mass and the change of volume of self-levelling and non-sagging sealants used in joints in building construction.

Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO 10563:2017)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Änderung von Masse und Volumen von selbstnivellierenden und fließbeständigen Fugendichtstoffen fest, die zur Abdichtung von Fugen im Hochbau verwendet werden.
ANMERKUNG   Dieses Prüfverfahren ist nicht zur Bestimmung des absoluten maximalen Volumenverlustes von geprüften Fugendichtstoffen vorgesehen. Dennoch liefert es Anhaltswerte für den Volumenverlust unter bestimmten Parametern.

Bâtiments et ouvrages de génie civil - Mastics - Détermination des variations de masse et de volume (ISO 10563:2017)

ISO 10563:2017 spécifie une méthode pour la détermination des variations de masse et de volume des mastics autonivelants et non coulables utilisés dans des joints dans la construction immobilière.

Stavbe in gradbeni inženirski objekti - Tesnilne mase - Ugotavljanje spremembe mase in prostornine (ISO 10563:2017)

Ta dokument določa metodo za ugotavljanje spremembe mase in prostornine samoizravnalnih in nepolzečih tesnilnih mas, ki se uporabljajo za stike v stavbah.
OPOMBA: Ta preskusni postopek ni namenjen ugotavljanju absolutnih najvišjih vrednosti izgube prostornine preskušane tesnilne mase, temveč je indikativna meritev izgube prostornine na podlagi podanih parametrov.

General Information

• Status: Withdrawn
• Publication Date: 20-Jun-2017
• Withdrawal Date: 04-Jul-2023
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/SS B02 - Structures
• Drafting Committee: CEN/SS B02 - Structures
• Ref Project: SIST EN ISO 10563:2017 - Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017)

Relations

• Replaces: EN ISO 10563:2005 - Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005)
• Effective Date: 28-Jun-2017
• Replaced By: EN ISO 10563:2023 - Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2017
1DGRPHãþD
SIST EN ISO 10563:2005
Stavbe in gradbeni inženirski objekti - Tesnilne mase - Ugotavljanje spremembe
mase in prostornine (ISO 10563:2017)
Buildings and civil engineering works - Sealants - Determination of change in mass and
volume (ISO 10563:2017)
Hochbau - Fugendichtstoffe - Bestimmung der Änderung von Masse und Volumen (ISO
10563:2017)
Bâtiments et ouvrages de génie civil - Mastics - Détermination des variations de masse
et de volume (ISO 10563:2017)
Ta slovenski standard je istoveten z: EN ISO 10563:2017
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10563
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2017
EUROPÄISCHE NORM
ICS 91.100.50 Supersedes EN ISO 10563:2005
English Version
Buildings and civil engineering works - Sealants -
Determination of change in mass and volume (ISO
10563:2017)
Bâtiments et ouvrages de génie civil - Mastics - Hochbau - Fugendichtstoffe - Bestimmung der
Détermination des variations de masse et de volume Änderung von Masse und Volumen (ISO 10563:2017)
(ISO 10563:2017)
This European Standard was approved by CEN on 22 April 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10563:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10563:2017) has been prepared by Technical Committee ISO/TC 59 "Buildings
and civil engineering works".
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2017 and conflicting national standards
shall be withdrawn at the latest by December 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10563:2005.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 10563:2017 has been approved by CEN as EN ISO 10563:2017 without any modification.
INTERNATIONAL ISO
STANDARD 10563
Third edition
2017-05
Buildings and civil engineering
works — Sealants — Determination of
change in mass and volume
Bâtiments et ouvrages de génie civil — Mastics — Détermination des
variations de masse et de volume
Reference number
ISO 10563:2017(E)
©
ISO 2017
ISO 10563:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 10563:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus and materials. 1
6 Preparation of test specimens . 2
6.1 For non-sagging sealant . 2
6.2 For self-levelling sealant . 2
7 Test procedure . 3
7.1 General . 3
7.2 Preconditioning . 3
7.3 Specific conditioning . 3
8 Calculation and expression of results . 3
8.1 Change in mass . 3
8.2 Change in volume. 4
9 Test report . 4
ISO 10563:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www
...