Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators

This European Standard gives guidance on the selection, design and location of control actuators so that they are adapted to the requirements of the operators, are suitable for the control task in question and take account of the circumstances of their use.
It applies to manual control actuators used in equipment for occupational and private use. It is particularly important to observe the recommendations in this European Standard where operating a control actuator may lead to injury or damage to health, either directly or as a result of a human error.

Sicherheit von Maschinen - Ergonomische Anforderungen an die Gestaltung von Anzeigen und Stellteilen - Teil 3: Stellteile

Diese Europäische Norm enthält Empfehlungen über die Auswahl, Gestaltung und Anordnung von Stellteilen, um eine Anpassung an die Anforderungen des Operators, die Eignung für die in Frage kommenden Steuerungsaufgaben und die Einsatzbedingungen zu berücksichtigen.
Sie gilt für handbetätigte Stellteile an Arbeitsmitteln für gewerbliche und private Zwecke. Es ist besonders wichtig, die Empfehlungen dieser Europäischen Norm zu berücksichtigen, wenn die Betätigung eines Stellteils entweder direkt oder aufgrund eines menschlichen Fehlverhaltens zu Verletzungen oder gesundheitlichen Schäden führen kann.

Sécurité des machines - Exigences ergonomiques pour la conception des dispositifs de signalisation et des organes de service - Partie 3: Organes de service

La présente norme européenne donne des recommandations sur la sélection, la conception et l’emplacement des
organes de service de telle sorte qu’ils soient adaptés aux exigences des opérateurs et qu’ils conviennent à la tâche
impliquant la commande concernée en tenant compte de leurs conditions d’utilisation.
Elle s’applique aux organes de service manuels utilisés avec les équipements à usage professionnel et privé.
Le respect des recommandations de la présente norme européenne est particulièrement important lorsque
l’utilisation d’un organe de service peut induire des risques en matière de santé et de sécurité, soit directement,
soit suite à une erreur humaine.

Varnost strojev - Ergonomske zahteve za načrtovanje prikazovalnikov in krmilnih stikal - 3. del: Krmilna stikala

General Information

Status
Published
Publication Date
30-Sep-2008
Withdrawal Date
27-Dec-2009
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
26-Feb-2021

Relations

Buy Standard

Standard
EN 894-3:2002+A1:2008
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sicherheit von Maschinen - Ergonomische Anforderungen an die Gestaltung von Anzeigen und Stellteilen - Teil 3: StellteileSécurité des machines - Exigences ergonomiques pour la conception des dispositifs de signalisation et des organes de service - Partie 3: Organes de serviceSafety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators13.180ErgonomijaErgonomics13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 894-3:2000+A1:2008SIST EN 894-3:2002+A1:2008en,fr01-december-2008SIST EN 894-3:2002+A1:2008SLOVENSKI
STANDARD



SIST EN 894-3:2002+A1:2008



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 894-3:2000+A1
October 2008 ICS 13.100; 13.180 Supersedes EN 894-3:2000 English Version
Safety of machinery -Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
Sécurité des machines - Exigences ergonomiques pour la conception des dispositifs de signalisation et des organes de service - Partie 3: Organes de service
Sicherheit von Maschinen - Ergonomische Anforderungen an die Gestaltung von Anzeigen und Stellteilen - Teil 3: Stellteile This European Standard was approved by CEN on 3 February 2000 and includes Amendment 1 approved by CEN on 14 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2008 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 894-3:2000+A1:2008: ESIST EN 894-3:2002+A1:2008



EN 894-3:2000+A1:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Selection procedure.7 5 Task evaluation and information collection.7 6 Intermediate selection of control families.17 7 Identification of suitable control types.21 8 Additional information for the design of manual control actuators.32 Annex A (informative)
Example of the use of this standard.35 Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC, amended by 98/79/EC"""".39 Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""".40
SIST EN 894-3:2002+A1:2008



EN 894-3:2000+A1:2008 (E) 3 Foreword This document (EN 894-3:2000+A1:2008) has been prepared by Technical Committee CEN/TC 122 "Ergonomics", the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest b
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.