EN ISO 6682:2008
(Main)Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
Defines zones of comfort and reach for controls derived from the overlapping reach capability of large and small operators in the seated position. Is intended as a guide for the design of the operator compartment controls for earth-moving machinery. Cancels and replaces the first edition (ISO 6682 : 1980), of which it constitutes a minor revision.
Erdbaumaschinen - Stellteile - Bequemlichkeitsbereiche und Reichweitenbereiche (ISO 6682:1986, einschließlich Änderung 1:1989)
Diese Internationale Norm beschreibt Bequemlichkeitsbereiche und Reichweitenbereiche für Stellteile, die aus den sich überschneidenden Reichweiten großer und kleiner Maschinenführer in sitzender Stellung abgeleitet sind.
Engins de terrassement - Zones de confort et d'accessibilité des commandes (ISO 6682:1986, Amd 1:1989 inclus)
Stroji za zemeljska dela - Območje udobja in dosega nadzora (ISO 6682:1986, vključno z Dopolnilom 1:1989)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 6682:2008
01-november-2008
1DGRPHãþD
SIST EN ISO 6682:2000
6WURML]D]HPHOMVNDGHOD2EPRþMHXGREMDLQGRVHJDQDG]RUD ,62
YNOMXþQR]'RSROQLORP
Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986,
including Amd 1:1989)
Erdbaumaschine - Stellteile - Bequemlichkeitsbereiche und Reichweitenbereiche (ISO
6682:1986, einschließlich Amd 1:1989)
Engins de terrassement - Zones de confort et d'accessibilité des commandes (ISO
6682:1986, Amd 1:1989 inclus)
Ta slovenski standard je istoveten z: EN ISO 6682:2008
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
SIST EN ISO 6682:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 6682:2008
---------------------- Page: 2 ----------------------
SIST EN ISO 6682:2008
EUROPEAN STANDARD
EN ISO 6682
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2008
ICS 53.100 Supersedes EN ISO 6682:1995
English Version
Earth-moving machinery - Zones of comfort and reach for
controls (ISO 6682:1986, including Amd 1:1989)
Engins de terrassement - Zones de confort et Erdbaumaschine - Stellteile - Bequemlichkeitsbereiche und
d'accessibilité des commandes (ISO 6682:1986, Amd Reichweitenbereiche (ISO 6682:1986, einschließlich Amd
1:1989 inclus) 1:1989)
This European Standard was approved by CEN on 25 August 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6682:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6682:2008
EN ISO 6682:2008 (E)
Contents Page
Foreword.3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 6682:2008
EN ISO 6682:2008 (E)
Foreword
The text of ISO 6682:1986, including Amd 1:1989 has been prepared by Technical Committee ISO/TC 127
“Earth-moving machinery” of the International Organization for Standardization (ISO) and has been taken over
as EN ISO 6682:2008 by Technical Committee CEN/TC 151 “Construction equipment and building material
machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2009, and conflicting national standards shall be withdrawn at
the latest by December 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 6682:1995.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EC Directive(s).
For relationship with EC Directive(s), see informative Annexes ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.