EN 3-10:2009
(Main)Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
This European Standard specifies the minimum requirements for attesting the conformity of portable fire extinguishers to EN 3-7, as well as the requirements for the quality and production control of the fire extinguishers.
It specifies the documentation to be provided regarding:
- identification of the applicant;
- identification of the manufacturer, if not the applicant;
- identification of subcontractor(s), if applicable;
- identification of the extinguisher;
- documents provided with the extinguisher;
- CE marking;
- quality management system;
- extinguishing media toxicological information.
It specifies methods for:
- type testing;
- factory assessment;
- controls during production.
NOTE 1 A test report and a satisfactory audit supporting documentation could form the basis for an applicant to request a certification of his product from an EA accredited certification body. Additional requirements can be made by national regulations and/or quality marks.
NOTE 2 Where appropriate, component family testing could be applied.
Tragbare Feuerlöscher - Teil 10: Festlegungen für die Bestätigung der Konformität tragbarer Feuerlöscher nach EN 3-7
Diese Europäische Norm legt die Mindestanforderungen an die Bestätigung der Konformität tragbarer Feuerlöscher
nach EN 3-7 sowie Anforderungen an die Qualität und an die Produktionskontrolle der Feuerlöscher
fest.
Sie legt die Dokumentation fest, die bereitzustellen ist:
- zur Identifizierung (Legitimation) des Antragstellers;
- zur Identifizierung (Legitimation) des Herstellers, falls er nicht der Antragsteller ist;
- zur Identifizierung (Legitimation) eines Subunternehmers oder mehrerer Subunternehmer, falls zutreffend;
- zur Identifizierung des Feuerlöschers;
- zur Dokumentation, die mit dem Feuerlöscher einzureichen ist;
- zur CE-Kennzeichnung;
- zum Qualitätsmanagementsystem;
- zu toxikologischen Informationen zum Löschmittel.
Es werden Verfahren festgelegt für:
- Typprüfung;
- Bewertung des Herstellerwerks;
- Kontrollen während der Produktion.
ANMERKUNG 1 Der Antragsteller kann für ein Produkt auf der Grundlage eines Prüfberichts und eines zufrieden
stellenden Qualitätsaudits, das die Dokumentation bestätigt, die Zertifizierung dieses Produkts von einer EA-akkreditierten
Zertifizierungsstelle beantragen. Zusätzliche Anforderungen können durch nationale Vorschriften und/oder Qualitätskennzeichnungen
gestellt werden.
ANMERKUNG 2 Die Prüfung kann, sofern zutreffend, an Bauteilfamilien vorgenommen werden.
Extincteurs d'incendie portatifs - Partie 10: Dispositions pour l'évaluation de la conformité d'un extincteur d'incendie portatif à l'EN 3-7
La présente Norme européenne spécifie les exigences minimales permettant d'attester la conformité des
extincteurs d'incendie portatifs à l'EN 3-7 ainsi que les exigences relatives au contrôle de la qualité et de la
production des extincteurs.
Elle spécifie la documentation à fournir concernant :
- l'identification du demandeur ;
- l'identification du fabricant, s'il n'est pas le demandeur ;
- l'identification du ou des sous-traitants, le cas échéant ;
- l'identification de l'extincteur ;
- les documents fournis avec l'extincteur ;
- le marquage CE ;
- le système de management de la qualité ;
- les informations toxicologiques relatives aux agents extincteurs.
Elle spécifie les méthodes relatives :
- aux essais de type ;
- à l'évaluation de l'usine ;
- aux contrôles effectués en cours de production.
NOTE 1 Un rapport d'essai et un rapport d'audit satisfaisant et documenté peuvent constituer la base sur laquelle le
demandeur s'appuie pour demander la certification de son produit par un organisme de certification accrédité par un
membre de l'EA. Des règlements nationaux et/ou des marques de qualité peuvent imposer des exigences
supplémentaires.
NOTE 2 Le cas échéant, il est possible de réaliser des essais de composants par famille.
Prenosni gasilniki - 10. del: Pravila za ugotavljanje skladnosti prenosnih gasilnikov z EN 3-7
Ta evropski standard opredeljuje minimalne zahteve za potrjevanje skladnosti prenosnih gasilnikov z EN 3-7 in zahteve za nadzor kvalitete in proizvodnje gasilnikov.
Določa, da mora biti priskrbljena dokumentacija glede:
- prepoznavanja prijavitelja,
- prepoznavanja proizvajalca, če to ni prijavitelj,
- prepoznavanje podizvajalcev, če je to primerno,
- prepoznavanja gasilnika,
- dokumentov, ki so podani z gasilnikom,
- oznake CE,
- sistema vodenja kakovosti,
- toksikoloških informacij glede sredstev za gašenje.
Določa metode za:
- tipsko preskušanje,
- tovarniško oceno,
- nadzor med proizvodnjo.
OPOMBA 1: Poročilo o preskusu in zadovoljiva spremna dokumentacija za presojo bi lahko oblikovali osnovo, da prijavitelj zaprosi za certifikacijo svojega izdelka pri certifikacijskem organu, akreditiranem pri EA. Dodatne zahteve so lahko podane z nacionalnimi predpisi in/ali oznakami kakovosti.
OPOMBA 2: Kjer je primerno, bi se lahko izvajalo preskušanje družine komponent.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prenosni gasilniki - 10. del: Pravila za ugotavljanje skladnosti prenosnih gasilnikov z EN 3-7Tragbare Feuerlöscher - Teil 10: Festlegungen für die Bestätigung der Konformität tragbarer Feuerlöscher nach EN 3-7Extincteurs d'incendie portatifs - Partie 10 : Dispositions pour l'évaluation de la conformité d'un extincteur d'incendie portatif à l'EN 3 partie 7Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-713.220.10Gašenje požaraFire-fightingICS:Ta slovenski standard je istoveten z:EN 3-10:2009SIST EN 3-10:2010en,fr,de01-marec-2010SIST EN 3-10:2010SLOVENSKI
STANDARDSIST EN 3-6:1995/A1:2000SIST EN 3-6:19951DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3-10
November 2009 ICS 13.220.10 Supersedes EN 3-6:1995English Version
Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7
Extincteurs d'incendie portatifs - Partie 10: Dispositions pour l'évaluation de la conformité d'un extincteur d'incendie portatif à l'EN 3-7
Tragbare Feuerlöscher - Teil 10: Festlegungen für die Bestätigung der Konformität tragbarer Feuerlöscher nach EN 3-7 This European Standard was approved by CEN on 17 October 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3-10:2009: ESIST EN 3-10:2010
Points to be checked by the surveillance body . 12A.1Minimum audit frequency . 12A.2Audits content . 12A.2.1Manufacturer and subcontractors . 12A.2.2Applicant . 13A.3Audit report . 13Annex B (normative)
Technical Data Sheet of an extinguisher . 14Annex C (normative)
Model of laboratory report . 16PORTABLE FIRE EXTINGUISHER . 16Annex 1 to the test report . 35Annex 2 to the test report . 38Annex 3 to the test report . 39Bibliography . 40 SIST EN 3-10:2010
1) Superseded EN 3-1, EN 3-2, EN 3-4 and EN 3-5. 2)
EN 3-8 and EN 3-9 superseded EN 3-3. 3)
EN 3-10 supersedes EN 3-6. SIST EN 3-10:2010
NOTE The applicant may also be the manufacturer. 3.6 EA accreditation of laboratories, inspection bodies and certification bodies by the European Co-operation for Accreditation NOTE The European Co-operation for Accreditation (EA) is the European network of nationally recognised accreditation bodies based in the European geographical area and is acknowledged by the European Commission and EFTA by memorandum of understanding concerning co-operation (see www.european-accreditation.org ). 3.7 certification body impartial body, governmental or non-governmental, possessing the necessary competence and responsibility to carry out certification of conformity according to given rules of procedure and management 4 Symbols and abbreviations For the purposes of this document, the following symbols and abbreviations apply. EA European Accreditation PED Pressure Equipment Directive (97/23/EC) QMS Quality Management System FPC Factory Production Control TDS Technical Data Sheet SIST EN 3-10:2010
EN 3-7:2004+A1:2007 16 9.2 Dielectric test, for water based extinguishers N/R 17 10.1 General requirement for use of extinguishers N/R 18a 10.2 Operating force for C02 extinguishers Periodically a 18b 10.2 Operating force for other extinguishers – 1st device Periodically a 18c 10.2 Operating force for other extinguishers – 2nd device Periodically a 19 10.3 Safety devices Periodically a 20 10.4 Filter for water based extinguishers N/R 21a 10.5 Hose and coupling systems, for C02 extinguishers Periodically a 21 b 10.5 Hose and coupling systems, for other extinguishers Periodically a 22a 10.6 Control valve, for C02 extinguishers N/R 22b 10.6 Control valve, for 1 and 2 kg powder extinguishers N/R 22c 10.6 Control valve, for other extinguishers N/R 23 11.1.1 Pressure gauge N/R to be continuedSIST EN 3-10:2010
Points to be checked by the surveillance body A.1 Minimum audit frequency The minimum audit frequency is once a year for the applicant, manufacturer and subcontractor(s) if applicable. A.2 Audits content A.2.1 Manufacturer and subcontractors With regard to manufacturer and subcontractors, the audits cover the products manufactured to EN 3-7. Where the certified QMS exists conforming to EN ISO 9001 (see 5.6), it shall be taken into consideration. Where the QMS is not certified, audits shall also cover relevant parts (see Clause 7). The manufacturer shall make the tests records relating to Clause 9 available to the auditor. Audits shall include records review. At the auditor’s discretion, selected tests from the list below shall be assessed. Common component may be tested to reduce the number of samples. Tests are performed on extinguishers selected at random by the auditor from production or from stock. A selection of extinguishing media for analysis according to points C and D of Table 2 can be made by the auditor at the occasion of the audit. These tests may be performed at manufacturer’s facilities or another suitable facility. Within a 5 year period, each test listed below shall have been performed on each model of a manufacturer: external painting: adhesion / thickness (compared to the minimum declared by the manufacturer); internal lining (where applicable): controlled according to manufacturer’s specification; filling tolerance; torque (Body/valve) CO2; extinguishers only; propellant pressure or weight where appropriate; hose and coupling system: performance of the hose (minimum pressure resistance); safety device removal force; marking; tightness-leak test; SIST EN 3-10:2010
Technical Data Sheet of an extinguisher Name and address of the applicant
Name and address of the manufacturer (when not the applicant) and place(s) of manufacture
Name and address of subcontractor and place(s) of subcontractor activity, where applicable
[In this case please also describe subcontracted activity]
Name, title and address of person responsible for this testing
Description of modification
Date when extinguishers could be available for testing
Model number
Existing model or range name
Type of extinguisher Gas cartridge
Stored pressure
Extinguishing medium Nominal charge: CO2
Foam
Water
Water plus additive
Powder
Freezing point depressant
Pressure relief device
Bursting disc
Declared min./max. operating temperatures and corresponding pressures: Tmin: °C Tmax: °C P(Tmin)barP(Tmax): bar
Class of fire and target ratings
…/… SIST EN 3-10:2010
Valve
Hose
Horn
Strainer
Bursting disc
Gas cartridge
Dip tube
Table for extinguishing agent Characteristics Manufacture Specification Chemical composition (Powder/Halon)
Principle components (Powder)
Particle distribution a (Powder)
Density in kg/dm3
(Foaming agents)
Viscosity 10 mm2/s
(Foaming agents)
Refractive index
N20D
(Foaming agent)
PH (Foaming agent)
Spectrogram b
a Method used to be stated Percentage for at least 3 particle sizes to be given. b At (20 + 2) °C - Infrared spectrogram to be supplied for foam concentrate and powder. NB If during testing changes are made this data sheet will be revised. Please submit in duplicate technical documentation comprising: 1) one set of drawings clearly characterising the model, including at a minimum those listed in the table of parts above; 2) details of the extinguishing agent giving its physical and chemical characteristics, including at minimum the information required in the table for extinguishing agent above; 3) an explanatory note on the type of heat treatment and welding and assembly process the cylinder has undergone. SIST EN 3-10:2010
Model of laboratory report This is a laboratory test report and not a product certification approval. M O D E L
LA B O R A T O R Y
R E P O R T
(Information contained on these two pages of the report shall be considered as the minimum list of details required in the introduction.) • Identification and address Date of Issue of the report
of the laboratory LABORATORY TEST REPORT Report nr
: ……………. Requested by : ……………. PORTABLE FIRE EXTING
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...