iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1090-2:2008/FprA1

(Amendment)

Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures

Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures

To amend the technical content of EN 1090-2 on issues agreed within the TC

Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln für die Ausführung von Stahltragwerken

Exécution des structures en acier et des structures en aluminium - Partie 2: Exigences techniques pour les structures en acier

Izvedba jeklenih in aluminijastih konstrukcij - 2. del: Tehnične zahteve za izvedbo jeklenih konstrukcij

General Information

Status
Not Published
ICS
91.080.10 - Metal structures
Technical Committee
CEN/TC 135 - Execution of steel structures
Drafting Committee
CEN/TC 135/WG 2 - Technical requirements for the execution of steel structures
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
24-May-2011
Due Date
10-May-2012
Completion Date
24-May-2011
Ref Project
SIST EN 1090-2:2008/kFprA1:2011 - Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures

Relations

Merged Into
EN 1090-2:2008+A1:2011 - Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
Effective Date
18-Jan-2023
Amends
EN 1090-2:2008 - Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
Effective Date
30-Oct-2010

Buy Standard

EN 1090-2:2008/kFprA1:2011EN 1090-2:2008/kFprA1:2011
PreviousNext
Draft
EN 1090-2:2008/kFprA1:2011
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2011
,]YHGEDMHNOHQLKLQDOXPLQLMDVWLKNRQVWUXNFLMGHO7HKQLþQH]DKWHYH]DL]YHGER
MHNOHQLKNRQVWUXNFLM
Execution of steel structures and aluminium structures - Part 2: Technical requirements
for steel structures
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 2: Technische Regeln
für die Ausführung von Stahltragwerken
Exécution des structures en acier et des structures en aluminium - Partie 2: Exigences
techniques pour les structures en acier
Ta slovenski standard je istoveten z: EN 1090-2:2008/FprA1
ICS:
91.080.10 Kovinske konstrukcije Metal structures
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 1090-2:2008
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
February 2011
ICS 91.080.10
English Version
Execution of steel structures and aluminium structures - Part 2:
Technical requirements for steel structures
Exécution des structures en acier et des structures en Ausführung von Stahltragwerken und Aluminiumtragwerken
aluminium - Partie 2: Exigences techniques pour les - Teil 2: Technische Regeln für die Ausführung von
structures en acier Stahltragwerken
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 135.
This draft amendment A1, if approved, will modify the European Standard EN 1090-2:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1090-2:2008/FprA1:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .5
1 Modification to Clause 1 .6
2 Modifications to 2.2.1 .6
3 Modification to 2.2.2 .7
4 Modifications to 2.2.3 .7
5 Modifications to 2.2.4 .7
6 Modification to 2.3 .7
7 Modifications to 2.4 .8
8 Modifications to 2.7 .8
9 Modification to 2.9 .8
10 Modification to 3.7.1 .8
11 Modifications to 4.2.1 .8
12 Modifications to 4.2.2 .8
13 Modifications to 5.3.1 .8
14 Modification to 5.3.4 .9
15 Modification to 5.4 .9
16 Modifications to 5.6.1 .9
17 Modification to 5.6.3 .9
18 Modification to 5.6.4 .9
19 Modification to 5.6.5 .9
20 Modification to 5.6.6 .9
21 Modifications to 5.6.9 .9
22 Modifications to 5.6.13 . 10
23 Modification to 6.4.1 . 10
24 Modifications to 6.5.2 . 10
25 Modification to 6.5.4 . 10
26 Modifications to 6.6.3 . 10
27 Modification to 7.1 . 11
28 Modification to 7.2.2 . 11
29 Modification to 7.4.1.2 . 11
30 Modification to 7.4.2 . 11
31 Modification to 7.5.9.1 . 11
32 Modification to 7.5.12 . 11
33 Modification to 7.7.2 . 11
34 Modification to 8.1 . 11
35 Modification to 8.2.1 . 12
36 Modifications to 8.2.2 . 12
37 Modifications to 8.2.4 . 12
38 Modification to 8.3 . 12
39 Modifications to 8.5.1 . 13
40 Modifications to 8.5.2 . 13
41 Modification to 8.5.4 . 13
42 Modifications to 8.5.5 . 13
43 Modifications to 8.5.6 . 13
44 Modification to 9.5.5 . 13
45 Modification to 9.6.5.3 . 13
46 Modifications to 10.1 . 13
47 Modifications to 10.2 . 14
48 Modification to 10.6 . 14
49 Modification to 11.1 . 14
50 Modifications to 11.2.3.4 . 14
51 Modifications to 11.2.3.5 . 14
52 Modification to 11.3.2 . 15
53 Modification to 12.4.1 . 15
54 Modifications to 12.4.2.1 . 15
55 Modifications to 12.4.2.2 . 15
56 Modifications to 12.5.2.3 . 15
57 Modifications to 12.5.2.4 . 16
59 Modification to 12.5.2.5 . 16
60 Modification to 12.5.2.6 . 16
61 Modification to 12.5.2.7 . 16
62 Modification to 12.7.3.1 . 16
63 Modifications to A.1 . 16
64 Modifications to A.2 . 17
65 Modifications to A.3 . 17
66 Modifications to D.1 . 18
67 Modifications to D.2 . 21
68 Modification to E.3 . 26
69 Modification to E.4 . 26
70 Modifications to F.1.1 . 26
71 Modification to F.1.2 . 27
72 Modification to F.2.2 . 27
73 Modification to F.6.1 . 27
74 Modification to F.6.3 .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1090-3:2019(Main)
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
SIST EN 1090-3:2019

This document specifies requirements for the execution of aluminium structural components and structures made from:
a)   rolled sheet, strip and plate;
b)   extrusions;
c)   cold drawn rod, bar and tube;
d)   forgings;
e)   castings.
NOTE 1   The execution of structural components is referred to as manufacturing, in accordance with EN 1090-1.
This document specifies requirements independent of the type and shape of the aluminium structure, and this document is applicable to structures under predominantly static loads as well as structures subject to fatigue. It specifies requirements related to the execution classes that are linked with consequence classes.
NOTE 2   Consequence classes are defined in EN 1990.
NOTE 3   Recommendations for selection of execution class in relation to consequence class are given in EN 1999-1-1.
This document covers components made of constituent products with thickness not less than 0,6 mm for welded components not less than 1,5 mm.
For components made from cold formed profiled sheeting that are within the scope of EN 1090-5, the requirements of EN 1090-5 take precedence over corresponding requirements in this document.
This document applies to structures designed according to the relevant parts of EN 1999. If this document is used for structures designed according to other design rules or used for other alloys and tempers not covered by EN 1999, a judgement of the reliability elements in these design rules is intended to be made.
This document specifies requirements for surface preparation prior to application of a protective treatment, and gives guidelines for application for such treatment in an informative annex.
This document gives options for specifying requirements to match project specific requirements.
This document is also applicable to temporary aluminium structures.

  • Standard
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1090-4:2018(Main)
Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
SIST EN 1090-4:2018

This European Standard specifies requirements for the execution, i.e. the manufacture and the installation, of cold-formed structural steel members and sheeting and cold-formed structures for roof, ceiling, floor, wall and cladding applications.
This European Standard applies to structures designed according to the EN 1993 series.
This European Standard applies to structural members and sheeting to be designed according to EN 1993 1 3.
This European Standard may be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard also specifies requirements for the execution i.e. the manufacture and the installation of structures made from cold formed profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading or seismic loading conditions and their documentation.
This European Standard covers sheeting of structural classes I and II according to EN 1993 1 3 used in structures.
This European Standard covers structural members of all structural classes according to EN 1993 1 3.
Structural sheeting are understood here to be:
-   profiled sheet, such as trapezoidal, sinusoidal or liner trays (Figure 1), or
Structural members are understood here to be:
-   members (linear profiled cross sections) that are produced by cold forming (Figure 2).
This European Standard also covers:
-   not welded built-up sections (Figure 2b and 2c);
-   cold-formed hollow sections including the welding of the longitudinal seam, not covered by EN 10219 1;
-   perforated, punctured and micro profiled sheeting and members;
NOTE 1   Welded built-up sections, are not covered, the execution provisions are given in EN 1090–2.
This European Standard also covers spacer constructions between the outer and inner or upper and lower skins for roofs, walls and ceilings made from cold-formed profiled sheeting and the connections and attachments of the afore mentioned elements as long as all are involved in load transfer.
This European Standard covers steel profiled sheeting for composite floors, e.g. during installation and in stage of pouring concrete.
Composite structural members where the interaction between dissimilar materials are an integral part of the structural behaviour such as sandwich panels and composite floors are not covered by this standard.
This European Standard does not cover the necessary analyses and detailing and execution rules for thermal insulation, moisture protection, noise control and fire protection.
This European Standard does not cover regulations of roof cladding and wall cladding, produced by traditional plumber methods or tinsmith methods.
Annex B of this standard concerns provisions which are not yet included in EN 1993 1 3. The guidelines in this annex may be wholly or partially superseded by future guidelines added to EN 1993.
This European Standard does not cover detailed requirements for water tightness or air permeability resistance and thermal aspects of sheeting.
NOTE 2   The structures covered in this standard can be for example
-   single- or multi-skin roofs, whereby the load-bearing structure (lower skin) or the actual roof covering (upper skin) or both consist of cold-formed structural members and sheeting;
-   single- or multi-skin walls whereby the load-bearing structure (inner skin), the actual cladding (outer skin) or both consist of cold-formed structural members and sheeting, or
-   trusses from cold formed members.
NOTE 3   Structures can consist of an assembly of structural members and sheeting made of steel according to EN 1090–4 and of aluminium according to EN 1090-5.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    96 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1090-5:2017(Main)
Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications
SIST EN 1090-5:2017

This European Standard specifies requirements for the execution i.e. the manufacture and the installation of cold-formed structural aluminium components made from profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading conditions or seismic loading conditions and their documentation. It does cover products of structural class I and II according to EN 1999-1-4 used in structures.
Structural elements are understood here to mean profiled sheeting, such as trapezoidal, sinusoidal, liner trays or cassette profiles (Figure 1), that are produced by cold forming. Perforated and micro profiled sheeting are also covered by this part.
Welded sections are excluded from this part and are covered by EN 1090-3 except seal welding in low-stress areas.
This standard also covers spacer constructions between the outer and inner or upper and lower skins as well as supporting members for roofs, walls and ceilings made from cold-formed profiled sheeting and the connections and attachments of the afore mentioned elements as long as they are involved in load transfer, it also covers connections and attachments of these elements.
A combination of steel and aluminium structural elements are permitted, e.g. liner trays made of steel, stiffened by profiles made of aluminium. In this case, EN 1090-4 and this document apply.
Composite structural elements where the interaction between dissimilar materials are an integral part of the structural behaviour such as sandwich panels and composite floors are not covered by this standard.
NOTE   The structures covered in this standard can be for example
-   single- or multi-skin roofs, whereby the load-bearing structure (lower skin) as well as the actual roof covering (upper skin) or both consist of structural elements;
-   single- or multi-skin walls whereby the load-bearing structure (inner skin) as well as the actual cladding (outer skin) or both consist of structural elements; or
-   suspended ceilings for interior fitting.

  • Standard
    61 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17052:2017(Main)
Guidelines on implementing EN 1090-1:2009+A1:2011, Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
SIST-TP CEN/TR 17052:2017

The scope of EN 1090-1:2009+A1:2011 states that the standard covers structural components and kits which are referred to as structural construction products in this document. This Technical Report gives information that clarifies when a structural construction product is covered by the scope of EN 1090-1:2009+A1:2011 and lists examples of products covered and not covered.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1090-1:2009+A1:2011(Main)
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
SIST EN 1090-1:2009+A1:2012

This European Standard specifies requirements for conformity assessment of performance characteristics for structural steel and aluminium components as well as for kits placed on the market as construction products. The conformity assessment covers the manufacturing characteristics, and where appropriate the structural design characteristics.
This European Standard covers also the conformity assessment of steel components used in composite steel and concrete structures.
The components can be used directly or in construction works or as structural components in the form of kits.
This European Standard applies to series and non-series structural components including kits.
The components can be made of hot rolled or cold formed constituent products or constituent products produced with other technologies. They may be produced of sections/profiles with various shapes, flat products (plates, sheet, strip), bars, castings, forgings made of steel and aluminium materials, unprotected or protected against corrosion by coating or other surface treatment, e.g. anodising of aluminium.
This European Standard covers structural cold formed members and sheeting as defined in EN 1993-1-3 and EN 1999-1-4.
This European Standard does not cover conformity assessment of components for suspended ceilings, rails or sleepers for use in railway systems.
NOTE   For certain steel and aluminium components, particular specifications for performance and other requirements have been developed. The particular specifications may be issued as an EN or as Clauses within an EN. An example is given in EN 13084-7 for single wall steel chimneys and steel liners. Such particular specifications will take precedence in case of non-compliance with the requirements of this European Standard.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    41 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1090-1:2009/FprA1(Amendment)
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
SIST EN 1090-1:2009/FprA1:2011

To amend the technical content of EN 1090-1 on issues agreed within the TC

  • Draft
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14713-2:2020(Main)
Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO 14713-2:2019)
SIST EN ISO 14713-2:2020

This document gives guidelines and recommendations for the general principles of design appropriate to articles to be hot dip galvanized after fabrication (e.g. in accordance with ISO 1461) for the corrosion protection of, for example, articles that have been manufactured in accordance with EN 1090-2.
This document does not apply to hot dip galvanized coatings applied to continuous wire or sheet (e.g. to EN 10346).

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1090-3:2019(Main)
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
SIST EN 1090-3:2019

This document specifies requirements for the execution of aluminium structural components and structures made from:
a)   rolled sheet, strip and plate;
b)   extrusions;
c)   cold drawn rod, bar and tube;
d)   forgings;
e)   castings.
NOTE 1   The execution of structural components is referred to as manufacturing, in accordance with EN 1090-1.
This document specifies requirements independent of the type and shape of the aluminium structure, and this document is applicable to structures under predominantly static loads as well as structures subject to fatigue. It specifies requirements related to the execution classes that are linked with consequence classes.
NOTE 2   Consequence classes are defined in EN 1990.
NOTE 3   Recommendations for selection of execution class in relation to consequence class are given in EN 1999-1-1.
This document covers components made of constituent products with thickness not less than 0,6 mm for welded components not less than 1,5 mm.
For components made from cold formed profiled sheeting that are within the scope of EN 1090-5, the requirements of EN 1090-5 take precedence over corresponding requirements in this document.
This document applies to structures designed according to the relevant parts of EN 1999. If this document is used for structures designed according to other design rules or used for other alloys and tempers not covered by EN 1999, a judgement of the reliability elements in these design rules is intended to be made.
This document specifies requirements for surface preparation prior to application of a protective treatment, and gives guidelines for application for such treatment in an informative annex.
This document gives options for specifying requirements to match project specific requirements.
This document is also applicable to temporary aluminium structures.

  • Standard
    127 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1090-4:2018(Main)
Execution of steel structures and aluminium structures - Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications
SIST EN 1090-4:2018

This European Standard specifies requirements for the execution, i.e. the manufacture and the installation, of cold-formed structural steel members and sheeting and cold-formed structures for roof, ceiling, floor, wall and cladding applications.
This European Standard applies to structures designed according to the EN 1993 series.
This European Standard applies to structural members and sheeting to be designed according to EN 1993 1 3.
This European Standard may be used for structures designed according to other design rules provided that conditions for execution comply with them and any necessary additional requirements are specified.
This European Standard also specifies requirements for the execution i.e. the manufacture and the installation of structures made from cold formed profiled sheeting for roof, ceiling, floor and wall applications under predominately static loading or seismic loading conditions and their documentation.
This European Standard covers sheeting of structural classes I and II according to EN 1993 1 3 used in structures.
This European Standard covers structural members of all structural classes according to EN 1993 1 3.
Structural sheeting are understood here to be:
-   profiled sheet, such as trapezoidal, sinusoidal or liner trays (Figure 1), or
Structural members are understood here to be:
-   members (linear profiled cross sections) that are produced by cold forming (Figure 2).
This European Standard also covers:
-   not welded built-up sections (Figure 2b and 2c);
-   cold-formed hollow sections including the welding of the longitudinal seam, not covered by EN 10219 1;
-   perforated, punctured and micro profiled sheeting and members;
NOTE 1   Welded built-up sections, are not covered, the execution provisions are given in EN 1090–2.
This European Standard also covers spacer constructions between the outer and inner or upper and lower skins for roofs, walls and ceilings made from cold-formed profiled sheeting and the connections and attachments of the afore mentioned elements as long as all are involved in load transfer.
This European Standard covers steel profiled sheeting for composite floors, e.g. during installation and in stage of pouring concrete.
Composite structural members where the interaction between dissimilar materials are an integral part of the structural behaviour such as sandwich panels and composite floors are not covered by this standard.
This European Standard does not cover the necessary analyses and detailing and execution rules for thermal insulation, moisture protection, noise control and fire protection.
This European Standard does not cover regulations of roof cladding and wall cladding, produced by traditional plumber methods or tinsmith methods.
Annex B of this standard concerns provisions which are not yet included in EN 1993 1 3. The guidelines in this annex may be wholly or partially superseded by future guidelines added to EN 1993.
This European Standard does not cover detailed requirements for water tightness or air permeability resistance and thermal aspects of sheeting.
NOTE 2   The structures covered in this standard can be for example
-   single- or multi-skin roofs, whereby the load-bearing structure (lower skin) or the actual roof covering (upper skin) or both consist of cold-formed structural members and sheeting;
-   single- or multi-skin walls whereby the load-bearing structure (inner skin), the actual cladding (outer skin) or both consist of cold-formed structural members and sheeting, or
-   trusses from cold formed members.
NOTE 3   Structures can consist of an assembly of structural members and sheeting made of steel according to EN 1090–4 and of aluminium according to EN 1090-5.

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    96 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12944-9:2018(Main)
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)
SIST EN ISO 12944-9:2018

ISO 12944-9:2018 specifies the performance requirements for protective paint systems for offshore and related structures (i.e. those exposed to the marine atmosphere, as well as those immersed in sea or brackish water). Such structures are exposed to environments of corrosivity category CX (offshore) and immersion category Im4 as defined in ISO 12944‑2.
ISO 12944-9:2018 describes paint systems for high durability according to ISO 12944‑1.
ISO 12944-9:2018 is applicable to structures made of carbon steel and does not cover Cd/Bi Cr and Zn/Bi Cr surfaces. It is not applicable to surfaces under insulation or concrete.
This document is applicable for paint systems intended for a service temperature range between −20 °C and +80 °C, and the performance testing is aimed at verifying suitability of the paint systems for this temperature range.
ISO 12944-9:2018 is applicable for paint systems for submerged service (Im4) which are intended for ambient operating temperatures up to a maximum of 50 °C.
ISO 12944-9:2018 specifies:
-      the test methods to be used to determine the composition of the separate components of the protective paint system;
-      the laboratory performance test methods for the assessment of the likely durability of the protective paint system;
-      the criteria to be used to evaluate the results of performance tests.
ISO 12944-9:2018 covers the requirements for new work and any repairs necessary before start-up. It can also be used in relation to maintenance where complete refurbishment is carried out and the underlying metal substrate is completely exposed by abrasive blast-cleaning.
ISO 12944-9:2018 does not address maintenance in general where methods of surface preparation other than abrasive blast-cleaning are typically used.
ISO 12944-9:2018 deals with structures, made of carbon steel of not less than 3 mm thickness, which are designed using an approved strength calculation.
The following are not covered by this document:
-      structures built of stainless steel as well as those built of copper, titanium or aluminium or their alloys;
-      steel cables;
-      buried structures;
-      pipelines;
-            the interiors of storage tanks.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day