Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits

This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263-1.
Small safety nets of system S according to EN 1263-1 (less than 35 m2 and 5,0 m on the shortest side) are not dealt with in this European Standard.

Temporäre Konstruktionen für Bauwerke - Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen

Diese Europäische Norm enthält sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen in
Übereinstimmung mit der Gebrauchsanleitung des Herstellers und mit den Produktfestlegungen und Prüfverfahren
der Schutznetztypen S, T, U und V nach EN 1263-1.
Kleine Schutznetze System S nach EN 1263-1 (kleiner als 35 m2 und 5,0 m auf der kürzesten Seite) sind
nicht Gegenstand dieser Europäischen Norm.

Équipement temporaires de chantiers - Filets de sécurité - Partie 2 : Exigences de sécurité concernant les limites de montage

Začasne konstrukcije za gradnjo - Varovalne mreže - 2. del: Varnostne zahteve za nameščanje varovalnih mrež

Ta evropski standard določa varnostne zahteve za nameščanje varovalnih mrež v skladu z navodili za uporabo proizvajalca in specifikacijami proizvodov ter za preskušanje varovalnih mrež sistema T, sistema U in sistema V v skladu s standardom EN 1263-1.
Majhne varovalne mreže sistema S v skladu s standardom EN 1263-1 (manj kot 35 m2 in 5,0 m na najkrajši strani) niso zajete v tem evropskem standardu.

General Information

Status
Published
Publication Date
02-Feb-2015
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
12-Jan-2015
Due Date
19-Mar-2015
Completion Date
03-Feb-2015

RELATIONS

Buy Standard

Standard
SIST EN 1263-2:2015
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Temporäre Konstruktionen für Bauwerke - Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von SchutznetzenÉquipement temporaires de chantiers - Filets de sécurité - Partie 2 : Exigences de sécurité concernant les limites de montageTemporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits91.220Gradbena opremaConstruction equipment13.340.60Protection against falling and slippingICS:Ta slovenski standard je istoveten z:EN 1263-2:2014SIST EN 1263-2:2015en,fr,de01-marec-2015SIST EN 1263-2:2015SLOVENSKI

STANDARDSIST EN 1263-2:20021DGRPHãþD
SIST EN 1263-2:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1263-2
December 2014 ICS 13.340.60 Supersedes EN 1263-2:2002English Version

Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits

Équipement temporaires de chantiers - Filets de sécurité - Partie 2 : Exigences de sécurité concernant les limites de montage

Temporäre Konstruktionen für Bauwerke - Schutznetze (Sicherheitsnetze) - Teil 2: Sicherheitstechnische Anforderungen für die Errichtung von Schutznetzen This European Standard was approved by CEN on 8 November 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1263-2:2014 ESIST EN 1263-2:2015

EN 1263-2:2014 (E) 2 Contents Page Foreword ..............................................................................................................................................................3 1 Scope ......................................................................................................................................................4 2 Normative references ............................................................................................................................4 3 Terms and definitions ...........................................................................................................................4 4 Safety requirements ..............................................................................................................................4 4.1 Instruction manual .................................................................................................................................4 4.2 Fall height ...............................................................................................................................................4 4.3 Catching width .......................................................................................................................................5 5 Positioning of system S safety nets ....................................................................................................7 5.1 Size of system S safety nets .................................................................................................................7 5.2 Positioning fixings .................................................................................................................................7 5.3 Safety net linkage ..................................................................................................................................8 5.4 Deformation of the safety net ...............................................................................................................8 6 Positioning of system T safety nets ....................................................................................................9 6.1 Positioning .............................................................................................................................................9 6.2 Safety net linkage ..................................................................................................................................9 6.3 Support frame positioning ................................................................................................................. 10 7 Positioning of system U safety nets ................................................................................................. 10 8 Positioning of system V safety nets ................................................................................................. 10 8.1 Position of the upper edge of the safety net .................................................................................... 10 8.2 Safety net linkage ............................................................................................................................... 11 8.3 Positioning .......................................................................................................................................... 11 Annex A (informative)

A-deviations ............................................................................................................... 12 Bibliography ..................................................................................................................................................... 13

SIST EN 1263-2:2015

EN 1263-2:2014 (E) 3 Foreword This document (EN 1263-2:2014) has been prepared by Technical Committee CEN/TC 53 “Temporary works equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2015 and conflicting national standards shall be withdrawn at the latest by June 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1263-2:2002. This European Standard is one of a series of standards as listed below: — EN 1263-1, Temporary works equipment — Safety nets — Part 1: Safety requirements, test methods — EN 1263-2, Temporary works equipment — Safety nets — Part 2: Safety requirements for the positioning limits The significant changes incorporated in this revision are: a) revision of Figures 1, 2, 4, and 5; b) complete editorial revision. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 1263-2:2015

EN 1263-2:2014 (E) 4 1 Scope This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263-1. Small safety nets of system S according to EN 1263-1 (less than 35 m2 and 5,0 m on the shortest side) are not dealt with in this European Standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1263-1:2014, Temporary works equipment — Safety nets — Part 1: Safety requirements, test methods 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1263-

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.