EN 14187-4:2003

Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel

This European Standard applies to a method of evaluating the resistance of cold applied joint sealants to the action of liquids by measuring the change in mass and volume after immersion in test fuel.

Kalt verarbeitbare Fugenmassen - Teil 4: Prüfverfahren zur Bestimmung der Massen- und Volumenänderung nach Lagerung in Prüfkraftstoff

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bewertung der Beständigkeit kalt verarbeitbarer Fugenmassen bei Einwirkung von flüssigen Chemikalien durch Messung der Massen  und der Volumenänderung nach Lagerung in flüssigen Chemikalien.

Mastics pour joints appliqués à froid - Partie 4: Méthodes d'essai pour la détermination de la variation de masse et de volume après immersion dans un carburant d'essai

La présente Norme européenne décrit une méthode permettant d'évaluer la résistance des mastics pour joints appliqués à froid à l'action de liquides chimiques en mesurant la variation de masse et de volume survenant après immersion dans ces liquides.

Hladno nanosljive tesnilne mase za stike – 4. del: Preskusna metoda za ugotavljanje spremembe mase in prostornine po namakanju v preskusnem gorivu

General Information

• Status: Withdrawn
• Publication Date: 10-Jun-2003
• Withdrawal Date: 28-Mar-2017
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 29-Mar-2017
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: SIST EN 14187-4:2004 - Cold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel

Relations

• Replaced By: EN 14187-4:2017 - Cold applied joint sealants - Test methods - Part 4: Determination of the change in mass and volume after immersion in test fuels and liquid chemicals
• Effective Date: 04-Apr-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hladno nanosljive tesnilne mase za stike – 4. del: Preskusna metoda za ugotavljanje spremembe mase in prostornine po namakanju v preskusnem gorivuKalt verarbeitbare Fugenmassen - Teil 4: Prüfverfahren zur Bestimmung der Massen- und Volumenänderung nach Lagerung in PrüfkraftstoffMastics pour joints appliqués a froid - Partie 4: Méthodes d'essai pour la détermination de la variation de masse et de volume apres immersion dans un carburant d'essaiCold applied joint sealants - Part 4: Test method for the determination of the change in mass and volume after immersion in test fuel93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 14187-4:2003SIST EN 14187-4:2004en01-junij-2004SIST EN 14187-4:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14187-4June 2003ICS 93.080.20English versionCold applied joint sealants - Part 4: Test method for thedetermination of the change in mass and volume afterimmersion in test fuelMastics pour joints appliqués à froid - Partie 4: Méthodesd'essai pour la détermination de la variation de masse etde volume après immersion dans un carburant d'essaiKalt verarbeitbare Fugenmassen - Teil 4: Prüfverfahren zurBestimmung der Massen- und Volumenänderung nachLagerung in PrüfkraftstoffThis European Standard was approved by CEN on 25 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14187-4:2003 ESIST EN 14187-4:2004

List of liquid chemicals.8Bibliography………………………………………………………………………………………………………………….10SIST EN 14187-4:2004

1)In preparation.SIST EN 14187-4:2004
...