EN ISO 17633:2006
(Main)Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2004)
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2004)
ISO 17633:2004 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding position and the all-weld metal mechanical properties, in the as welded or heat treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.
ISO 17633:2004 is a combined standard providing for classification utilizing a system based upon classification according to nominal composition, or utilizing a system based upon classification according to alloy type.
Schweißzusätze - Fülldrahtelektroden und Füllstäbe zum Metall-Lichtbogenschweißen mit oder ohne Gasschutz von nichtrostenden und hitzebeständigen Stählen - Einteilung (ISO 17633:2004)
Diese Internationale Norm legt Anforderungen für die Einteilung von Fülldrahtelektroden und Füllstäben mit
schlackebildender und Metallpulver-Füllung zum Metall-Lichtbogenschweißen mit oder ohne Gasschutz von
nichtrostenden und hitzebeständigen Stählen fest. Die Einteilung beruht auf der chemischen
Zusammensetzung des reinen Schweißgutes, der Art der Füllung, dem Schutzgas, der Schweißposition und
den mechanischen Eigenschaften des reinen Schweißgutes im Schweißzustand oder nach einer
Wärmenachbehandlung.
Diese Internationale Norm kombiniert zur Einteilung ein System, das auf der Nennzusammensetzung beruht,
mit einem System, das auf dem Legierungstyp beruht.
1) Abschnitte und Tabellen mit der Bezeichnung "Einteilung nach der Nennzusammensetzung" sind nur für
solche Produkte anwendbar, die nach diesem System eingeteilt sind.
2) Abschnitte und Tabellen mit der Bezeichnung "Einteilung nach dem Legierungstyp" sind nur für solche
Produkte anwendbar, die nach diesem System eingeteilt sind.
3) Abschnitte und Tabellen ohne eine dieser Bezeichnungen sind für solche Produkte anwendbar, die nach
einem oder beiden Systemen eingeteilt sind.
Es ist bekannt, dass die Schweißeigenschaften von Fülldrahtelektroden durch die Anwendung von
pulsierendem Strom beeinflusst werden können, jedoch ist in dieser Internationalen Norm pulsierender Strom
nicht für die Einteilung der Fülldrahtelektroden vorgesehen.
Produits consommables pour le soudage - Fils et baguettes fourrés pour le soudage à l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux températures élevées - Classification (ISO 17633:2004)
L'ISO 17633:2004 spécifie les exigences de classification des fils et baguettes fourrés de flux ou de métal destinés au soudage à l'arc avec ou sans protection gazeuse des aciers inoxydables et résistant aux températures élevées, en fonction de la composition chimique du métal fondu hors dilution, du type de fourrage du fil, du gaz de protection, de la position de soudage et des caractéristiques mécaniques du métal fondu hors dilution.
L'ISO 17633:2004 est une norme mixte permettant une classification utilisant un système basé sur la classification d'après la composition nominale, ou d'après le type d'alliage
Dodajni materiali za varjenje –Strženske žice iz cevi in palice za obločno varjenje nerjavnih in ognjeodpornih jekel v zaščitnem plinu in brez zaščite – Razvrščanje (ISO 17633:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2006
'RGDMQLPDWHULDOL]DYDUMHQMH±6WUåHQVNHåLFHL]FHYLLQSDOLFH]DREORþQRYDUMHQMH
QHUMDYQLKLQRJQMHRGSRUQLKMHNHOY]DãþLWQHPSOLQXLQEUH]]DãþLWH±5D]YUãþDQMH
,62
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas
shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO
17633:2004)
Schweißzusätze - Fülldrahtelektroden und Füllstäbe zum Metall-Lichtbogenschweißen
mit oder ohne Gasschutz von nichtrostenden und hitzebeständigen Stählen - Einteilung
(ISO 17633:2004)
Produits consommables pour le soudage - Fils et baguettes fourrés pour le soudage a
l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux
températures élevées - Classification (ISO 17633:2004)
Ta slovenski standard je istoveten z: EN ISO 17633:2006
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 17633
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 25.160.20 Supersedes EN 12073:1999
English Version
Welding consumables - Tubular cored electrodes and rods for
gas shielded and non-gas shielded metal arc welding of
stainless and heat-resisting steels - Classification (ISO
17633:2004)
Produits consommables pour le soudage - Fils et baguettes Schweißzusätze - Fülldrahtelektroden und Füllstäbe zum
fourrés pour le soudage à l'arc avec ou sans protection Metall-Lichtbogenschweißen mit oder ohne Gasschutz von
gazeuse des aciers inoxydables et des aciers résistant aux nichtrostenden und hitzebeständigen Stählen - Einteilung
températures élevées - Classification (ISO 17633:2004) (ISO 17633:2004)
This European Standard was approved by CEN on 16 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17633:2006: E
worldwide for CEN national Members.
Foreword
The text of ISO 17633:2004 has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes” of the International Organization for Standardization (ISO) and has been
taken over as EN ISO 17633:2006 by Technical Committee CEN/TC 121 "Welding", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by October 2006, and conflicting national
standards shall be withdrawn at the latest by October 2006.
This document supersedes EN 12073:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 17633:2004 has been approved by CEN as EN ISO 17633:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 17633
First edition
2004-07-01
Welding consumables — Tubular cored
electrodes and rods for gas shielded and
non-gas shielded metal arc welding of
stainless and heat-resisting steels —
Classification
Produits consommables pour le soudage — Fils et baguettes fourrés
pour le soudage à l'arc avec ou sans protection gazeuse des aciers
inoxydables et des aciers résistant aux températures élevées —
Classification
Reference number
ISO 17633:2004(E)
©
ISO 2004
ISO 17633:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2004
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2004 – All rights reserved
ISO 17633:2004(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Classification. 2
4 Symbols and requirements. 3
4.1 Symbol for the product/process. 3
4.2 Symbol for the chemical composition of all-weld metal. 3
4.3 Symbol for type of electrode core. 13
4.4 Symbol for shielding gas . 13
4.5 Symbol for welding position. 14
5 Mechanical tests . 14
5.1 Preheating and interpass temperatures .14
5.2 Pass sequence . 15
6 Chemical analysis . 15
7 Fillet weld test . 16
8 Retests . 17
9 Technical delivery conditions. 17
10 Examples of designation. 18
Annex A (informative) Comparison charts of alloy designation according to nominal composition
and alloy type . 19
Annex B (informative) Description of types of electrode core — classification according to
nominal composition . 20
Annex C (informative) Description of types of tubular cored electrodes and rods — classification
according to alloy type. 21
Annex D (informative) Considerations on weld metal ferrite contents. 22
Bibliography . 25
ISO 17633:2004(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 17633 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 3, Welding consumables.
iv © ISO 2004 – All rights reserved
ISO 17633:2004(E)
Introduction
This International Standard provides a classification system for tubular cored electrodes and rods for welding
stainless steels. It recognizes that there are two somewhat different approaches in the global market, to
classifying a given tubular stainless steel welding consumable, and allows for either or both to be used, to suit
a particular market need. Application of either type of classification designation (or of both where suitable)
identifies a product as classified according to this International Standard.
The classification according to system A is mainly based on EN 12073:1999, Welding consumables —
Tubular cored electrodes for metal arc welding with or without a gas shield of stainless and heat-resisting
steels — Classification. The classification according to system B is mainly based upon standards used around
the Pacific Rim.
Requests for official interpretations of any aspect of this International Standard should be directed to the
Secretariat of ISO/TC 44/SC 3, via your national standards body, a complete listing of which can be found at
www.iso.org.
INTERNATIONAL STANDARD ISO 17633:2004(E)
Welding consumables — Tubular cored electrodes and rods for
gas shielded and non-gas shielded metal arc welding of
stainless and heat-resisting steels — Classification
1 Scope
This International Standard specifies requirements for classification of tubular flux and metal cored electrodes
and rods, based on the all-weld metal chemical composition, the type of electrode core, shielding gas, welding
position and the all-weld metal mechanical properties, in the as welded or heat treated conditions, for gas
shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.
This International Standard is a combined standard providing for classification utilizing a system based upon
classification according to nominal composition, or utilizing a system based upon classification according to
alloy type.
1) Paragraphs and tables which carry the label “classification according to nominal composition” are
applicable only to products classified to that system.
2) Paragraphs and tables which carry the label “classification according to alloy type” are applicable
only to products classified to that system.
3)
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.