Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO 17633:2017)

ISO 17633:2017 specifies requirements for classification of tubular flux and metal cored electrodes and rods, based on the all-weld metal chemical composition, the type of core, shielding gas, welding position and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels.
ISO 17633:2017 is a combined standard providing for classification utilizing a system based upon nominal composition or utilizing a system based upon alloy type.
a)    Clauses, subclauses, and tables which carry the suffix letter "A" are applicable only to products classified using the system based upon nominal composition.
b)    Clauses, subclauses, and tables which carry the suffix letter "B" are applicable only to products classified using the system based upon alloy type.
c)    Clauses, subclauses, and tables which do not have either the suffix letter "A" or the suffix letter "B" are applicable to all products classified in accordance with this document.
ISO 17633:2017 does not use pulsed current for determining the product classification.

Schweißzusätze - Fülldrahtelektroden und Füllstäbe zum Metall-Lichtbogenschweißen mit und ohne Gasschutz von nichtrostenden und hitzebeständigen Stählen - Einteilung (ISO 17633:2017)

Dieses Dokument legt Anforderungen für die Einteilung von Fülldrahtelektroden und Füllstäben zum Metall-Lichtbogenschweißen mit oder ohne Gasschutz von nichtrostenden und hitzebeständigen Stählen fest. Die Einteilung beruht auf der chemischen Zusammensetzung des reinen Schweißgutes, der Art der Füllung, dem Schutzgas, der Schweißposition und den mechanischen Eigenschaften des reinen Schweißgutes im Schweißzustand oder nach einer Wärmenachbehandlung.
Dieses Dokument ist eine kombinierte Norm und benutzt zur Einteilung ein System entsprechend der Nennzusammensetzung oder entsprechend dem Legierungstyp.
a)   Abschnitte, Unterabschnitte und Tabellen mit einem nachgestellten „A“ sind nur für solche Produkte anwendbar, die nach dem System auf Basis der Nennzusammensetzung eingeteilt sind;
b)   Abschnitte, Unterabschnitte und Tabellen mit einem nachgestellten „B“ sind nur für solche Produkte anwendbar, die nach dem System auf Basis des Legierungstyps eingeteilt sind;
c)   Abschnitte, Unterabschnitte und Tabellen, die kein nachgestelltes „A“ oder „B“ enthalten, sind für alle nach dieser Internationalen Norm eingeteilten Produkte anwendbar.
Dieses Dokument verwendet zur Bestimmung der Produkteinteilung keinen pulsierenden Strom

Produits consommables pour le soudage - Fils et baguettes fourrés pour le soudage à l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux températures élevées - Classification (ISO 17633:2017)

ISO 17633:2017 spécifie les exigences de classification des fils et baguettes fourrés de flux ou de métal, en fonction de la composition chimique du métal fondu hors dilution, du type fourrage, du gaz de protection, de la position de soudage et des caractéristiques mécaniques du métal fondu hors dilution, fils et baguettes étant destinés au soudage à l'arc avec ou sans protection gazeuse des aciers inoxydables et résistant aux températures élevées.
ISO 17633:2017 est une norme mixte permettant une classification utilisant un système basé sur la classification d'après la composition nominale ou utilisant un système d'après le type d'alliage.
a)    Les articles, paragraphes et tableaux qui portent la lettre «A» ne sont applicables qu'aux produits classifiés selon le système basé sur la composition nominale.
b)    Les articles, paragraphes et tableaux qui portent la lettre «B» ne sont applicables qu'aux produits classifiés selon le système basé sur le type d'alliage.
c)    Les articles, paragraphes et tableaux qui ne portent ni la lettre «A» ni la lettre «B» sont applicables aux fils fourrés pour le soudage à l'arc classifiés conformément au présent document.
ISO 17633:2017 n'utilise pas le courant pulsé pour la détermination de la classification des produits.

Dodajni materiali za varjenje - Strženske žice in palice za obločno varjenje nerjavnih in ognjeodpornih jekel v zaščitnem plinu in brez zaščite - Razvrstitev (ISO 17633:2017)

Ta dokument določa zahteve za razvrstitev strženskih žic in palic na osnovi kemične sestave čistega vara, vrste stržena, zaščitnega plina, položaja varjenja ter mehanskih lastnosti čistega vara v varjenem stanju ali s toplotno obdelavo za obločno varjenje nerjavnih in ognjeodpornih jekel v zaščitnem plinu in brez zaščite.
Ta dokument je združen standard, ki omogoča razvrstitev po sistemu na osnovi nominalne sestave ali sistemu na osnovi vrste zlitine.
a) Točke, podtočke in preglednice z dodano črko »A« se uporabljajo samo za proizvode, razvrščene po sistemu na osnovi nominalne sestave.
b) Točke, podtočke in preglednice z dodano črko »B« se uporabljajo samo za proizvode, razvrščene po sistemu na osnovi vrste zlitine.
c) Točke, podtočke in preglednice brez dodane črke »A« ali »B« se uporabljajo za vse proizvode, razvrščene v skladu s tem dokumentom.
Za določanje razvrstitve proizvodov v tem dokumentu se ne uporablja udarni tok.

General Information

Status
Published
Publication Date
30-Jan-2018
Withdrawal Date
30-Jul-2018
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
31-Jan-2018
Completion Date
31-Jan-2018

Relations

Buy Standard

Standard
EN ISO 17633:2018
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 17633:2016
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17633:2018
01-oktober-2018
1DGRPHãþD
SIST EN ISO 17633:2012
'RGDMQLPDWHULDOL]DYDUMHQMH6WUåHQVNHåLFHLQSDOLFH]DREORþQRYDUMHQMH
QHUMDYQLKLQRJQMHRGSRUQLKMHNHOY]DãþLWQHPSOLQXLQEUH]]DãþLWH5D]YUVWLWHY
,62
Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas
shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO
17633:2017)
Schweißzusätze - Fülldrahtelektroden und Füllstäbe zum Metall-Lichtbogenschweißen
mit und ohne Gasschutz von nichtrostenden und hitzebeständigen Stählen - Einteilung
(ISO 17633:2017)
Produits consommables pour le soudage - Fils et baguettes fourrés pour le soudage à
l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux
températures élevées - Classification (ISO 17633:2017)
Ta slovenski standard je istoveten z: EN ISO 17633:2018
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST EN ISO 17633:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17633:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 17633:2018


EN ISO 17633
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2018
EUROPÄISCHE NORM
ICS 25.160.20 Supersedes EN ISO 17633:2010
English Version

Welding consumables - Tubular cored electrodes and rods
for gas shielded and non-gas shielded metal arc welding of
stainless and heat-resisting steels - Classification (ISO
17633:2017)
Produits consommables pour le soudage - Fils et Schweißzusätze - Fülldrahtelektroden und Füllstäbe
baguettes fourrés pour le soudage à l'arc avec ou sans zum Metall-Lichtbogenschweißen mit und ohne
protection gazeuse des aciers inoxydables et des aciers Gasschutz von nichtrostenden und hitzebeständigen
résistant aux températures élevées - Classification (ISO Stählen - Einteilung (ISO 17633:2017)
17633:2017)
This European Standard was approved by CEN on 17 November 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17633:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17633:2018
EN ISO 17633:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17633:2018
EN ISO 17633:2018 (E)
European foreword
This document (EN ISO 17633:2018) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2018, and conflicting national standards shall be
withdrawn at the latest by July 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 17633:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
...

SLOVENSKI STANDARD
oSIST prEN ISO 17633:2016
01-marec-2016
'RGDMQLPDWHULDOL]DYDUMHQMH6WUåHQVNHåLFHLQVDPR]DãþLWQHåLFHL]FHYLWHUSDOLFH
]DREORþQRYDUMHQMHQHUMDYQLKLQRJQMHRGSRUQLKMHNHO5D]YUVWLWHY ,62',6

Welding consumables - Tubular cored electrodes and rods for gas shielded and non-gas
shielded metal arc welding of stainless and heat-resisting steels - Classification (ISO/DIS
17633:2016)
Schweißzusätze - Fülldrahtelektroden und Füllstäbe zum Metall-Lichtbogenschweißen
mit und ohne Gasschutz von nichtrostenden und hitzebeständigen Stählen - Einteilung
(ISO/DIS 17633:2016)
Produits consommables pour le soudage - Fils et baguettes fourrés pour le soudage à
l'arc avec ou sans protection gazeuse des aciers inoxydables et des aciers résistant aux
températures élevées - Classification (ISO/DIS 17633:2016)
Ta slovenski standard je istoveten z: prEN ISO 17633
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
oSIST prEN ISO 17633:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 17633:2016

---------------------- Page: 2 ----------------------
oSIST prEN ISO 17633:2016
DRAFT INTERNATIONAL STANDARD
ISO/DIS 17633
ISO/TC 44/SC 3 Secretariat: ANSI
Voting begins on: Voting terminates on:
2016-01-21 2016-04-21
Welding consumables — Tubular cored electrodes
and rods for gas shielded and non-gas shielded metal
arc welding of stainless and heat-resisting steels —
Classification
Produits consommables pour le soudage — Fils et baguettes fourrés pour le soudage à l’arc avec ou sans
protection gazeuse des aciers inoxydables et des aciers résistant aux températures élevées — Classification
ICS: 25.160.20
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 17633:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 17633:2016
ISO/DIS 17633:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 17633:2016
ISO/DIS 17633
Contents Page
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Classification . 2
4 Symbols and requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.