Extenders - Specifications and methods of test - Part 1: Introduction and general test methods (ISO 3262-1:2020)

This document gives the definition for the term extender and specifies test methods that are required for most of the subsequent parts of ISO 3262.
NOTE    The subsequent parts of ISO 3262 specify requirements and the corresponding methods of test for extenders for use in paints, related coating materials and other applications.

Füllstoffe - Anforderungen und Prüfverfahren - Teil 1: Einleitung und allgemeine Prüfverfahren (ISO 3262-1:2020)

Dieses Dokument definiert den Begriff Füllstoff und legt die Prüfverfahren fest, die für die meisten anderen Teile von ISO 3262 erforderlich sind.
ANMERKUNG Die anderen Teile von ISO 3262 legen Anforderungen und die entsprechenden Prüfverfahren für Füllstoffe zur Verwendung in Beschichtungsstoffen und anderen Anwendungsgebieten fest.

Matières de charge - Spécifications et méthodes d'essai - Partie 1: Introduction et méthodes d'essai générales (ISO 3262-1:2020)

Le présent document donne la définition du terme «matière de charge» et spécifie les méthodes d'essai nécessaires pour la plupart des parties ultérieures de l'ISO 3262.
NOTE    Les parties ultérieures de l'ISO 3262 spécifient les exigences et les méthodes d'essai correspondantes pour les matières de charge à utiliser dans les peintures, produits de revêtement apparentés et autres applications.

Polnila - Specifikacije in preskusne metode - 1. del: Uvod in splošne preskusne metode (ISO 3262-1:2020)

General Information

Status
Published
Publication Date
31-Mar-2020
Withdrawal Date
30-Oct-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Apr-2020
Completion Date
01-Apr-2020

Relations

Buy Standard

Standard
EN ISO 3262-1:2020
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 3262-1:2019
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3262-1:2020
01-junij-2020
Nadomešča:
SIST EN ISO 3262-1:1998
Polnila - Specifikacije in preskusne metode - 1. del: Uvod in splošne preskusne
metode (ISO 3262-1:2020)
Extenders - Specifications and methods of test - Part 1: Introduction and general test
methods (ISO 3262-1:2020)
Füllstoffe - Anforderungen und Prüfverfahren - Teil 1: Einleitung und allgemeine
Prüfverfahren (ISO 3262-1:2020)
Matières de charge - Spécifications et méthodes d'essai - Partie 1: Introduction et
méthodes d'essai générales (ISO 3262-1:2020)
Ta slovenski standard je istoveten z: EN ISO 3262-1:2020
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
SIST EN ISO 3262-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3262-1:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 3262-1:2020


EN ISO 3262-1
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2020
EUROPÄISCHE NORM
ICS 87.060.10 Supersedes EN ISO 3262-1:1998
English Version

Extenders - Specifications and methods of test - Part 1:
Introduction and general test methods (ISO 3262-1:2020)
Matières de charge - Spécifications et méthodes d'essai Füllstoffe - Anforderungen und Prüfverfahren - Teil 1:
- Partie 1: Introduction et méthodes d'essai générales Einleitung und allgemeine Prüfverfahren (ISO 3262-
(ISO 3262-1:2020) 1:2020)
This European Standard was approved by CEN on 25 March 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3262-1:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 3262-1:2020
EN ISO 3262-1:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 3262-1:2020
EN ISO 3262-1:2020 (E)
European foreword
This document (EN ISO 3262-1:2020) has been prepared by Technical Committee ISO/TC 256
"Pigments, dyestuffs and extenders" in collaboration with Technical Committee CEN/TC 298 “Pigments
and extenders” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2020, and conflicting national standards shall
be withdrawn at the latest by October 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3262-1:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 3262-1:2020 has been approved by CEN as EN ISO 3262-1:2020 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 3262-1:2020

---------------------- Page: 6 ----------------------
SIST EN ISO 3262-1:2020
INTERNATIONAL ISO
STANDARD 3262-1
Second edition
202
...

SLOVENSKI STANDARD
oSIST prEN ISO 3262-1:2019
01-september-2019
Polnila - Specifikacije in metode preskušanja - 1. del: Uvod in splošne preskusne
metode (ISO/DIS 3262-1:2019)
Extenders - Specifications and methods of test - Part 1: Introduction and general test
methods (ISO/DIS 3262-1:2019)
Füllstoffe - Anforderungen und Prüfverfahren - Teil 1: Einleitung und allgemeine
Prüfverfahren (ISO/DIS 3262-1:2019)
Matières de charge - Spécifications et méthodes d'essai - Partie 1: Introduction et
méthodes d'essai générales (ISO/DIS 3262-1:2019)
Ta slovenski standard je istoveten z: prEN ISO 3262-1
ICS:
87.060.10 Pigmenti in polnila Pigments and extenders
oSIST prEN ISO 3262-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 3262-1:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 3262-1:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3262-1
ISO/TC 256 Secretariat: DIN
Voting begins on: Voting terminates on:
2019-07-10 2019-10-02
Extenders — specifications and methods of test —
Part 1:
Introduction and general test methods
Matières de charge — Spécifications et méthodes d'essai —
Partie 1: Introduction et méthodes d'essai générales
ICS: 87.060.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3262-1:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 3262-1:2019
ISO/DIS 3262-1:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 3262-1:2019
ISO/DIS 3262-1:2019(E)

Contents  Page
Foreword .iv
1  Scope . 1
2  Normative references . 1
3  Terms and definitions . 1
4  Sampling . 2
5  Test methods . 2
5.1 Comparison of colour . 2
5.2 Determination of loss on ignition . 2
5.2.1 Apparatus .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.