EN ISO 4641:2016

Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)

ISO 4641:2016 specifies the minimum requirements for textile-reinforced, smooth-bore rubber water-suction and discharge hoses and hose assemblies.
Three types of hoses and hose assemblies are specified according to their operating duty requirements, i.e. their ambient and water temperature ranges:
-      ambient temperatures: −25 °C to +70 °C;
-      water temperatures during operation: 0 °C to +70 °C.

Saug- und Druck-Gummischläuche und -schlauchleitungen für Wasser - Anforderungen (ISO 4641:2016)

Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau - Spécifications (ISO 4641:2016)

ISO 4641:2016 spécifie les exigences minimales pour les tuyaux et flexibles en caoutchouc à armature textile, à paroi intérieure lisse, utilisés pour l'aspiration et le refoulement de l'eau.
Trois types de tuyaux et de flexibles sont spécifiés selon leurs exigences de service, c'est-à-dire les plages de températures ambiantes et de températures de l'eau:
-      températures ambiantes: −25 °C à +70 °C;
-      températures de l'eau en service: 0 °C à +70 °C.

Gumene cevi in cevni priključki za dotok in odtok vode - Specifikacija (ISO 4641:2016)

Ta dokument določa minimalne zahteve za s tekstilom ojačene, gladke gumene cevi in cevne priključke za dotok in odtok vode.
Tri vrste cevi in cevnih priključkov so določene v skladu z zahtevami za njihovo delovanje,
tj. z njihovimi razponi temperature okolja in vode:
– temperatura okolja: od −25 °C do 70 °C;
– temperatura vode med delovanjem: od 0 °C do 70 °C.

General Information

• Status: Published
• Publication Date: 13-Dec-2016
• Withdrawal Date: 29-Jun-2017
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 14-Dec-2016
• Completion Date: 14-Dec-2016
• Ref Project: SIST EN ISO 4641:2017 - Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016)

Relations

• Replaces: EN ISO 4641:2011 - Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2010)
• Effective Date: 21-Dec-2016
• Revised: FprEN ISO 4641 - Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO/FDIS 4641:2023)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4641:2017
01-marec-2017
1DGRPHãþD
SIST EN ISO 4641:2012
*XPHQHFHYLLQFHYQLSULNOMXþNL]DGRWRNLQRGWRNYRGH6SHFLILNDFLMD,62

Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO
4641:2016)
Saug -und Druck-Gummischläuche und Schlauchleitungen für Wasser - Anforderung
(ISO 4641:2016)
Tuyaux et flexibles en caoutchouc pour aspiration et refoulement d'eau - Spécifications
(ISO 4641:2016)
Ta slovenski standard je istoveten z: EN ISO 4641:2016
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 4641:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4641:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 4641:2017


EN ISO 4641
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2016
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN ISO 4641:2011
English Version

Rubber hoses and hose assemblies for water suction and
discharge - Specification (ISO 4641:2016)
Tuyaux et flexibles en caoutchouc pour aspiration et Saug -und Druck-Gummischläuche und
refoulement d'eau - Spécifications (ISO 4641:2016) Schlauchleitungen für Wasser - Anforderung (ISO
4641:2016)
This European Standard was approved by CEN on 22 October 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4641:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4641:2017
EN ISO 4641:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 4641:2017
EN ISO 4641:2016 (E)
European foreword
This document (EN ISO 4641:2016) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses
and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 4641:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4641:2016 has been approved by CEN as EN ISO 4641:2016 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 4641:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 4641:2017
INTERNATIONAL ISO
STANDARD 4641
Fifth edition
2016-12-01
Rubber hoses and hose assemblies
for water suction and discharge —
Specification
Tuyaux et flexibles en caoutchouc pour asp
...