EN 13031-1:2019

Greenhouses - Design and construction - Part 1: Commercial production greenhouses

This document specifies principles and requirements for the mechanical resistance and stability, serviceability and durability for design and construction of commercial production greenhouse structures, including their foundations, irrespective of the material used, for the professional production of plants (crops).
Fire resistance-related aspects are not covered in this document.

Gewächshäuser - Bemessung und Konstruktion - Teil 1: Produktionsgewächshäuser

Dieses Dokument spezifiziert Grundlagen und Anforderungen an den mechanischen Widerstand und die Standsicherheit, die Gebrauchstauglichkeit und die Dauerhaftigkeit bei Bemessung, Konstruktion und Bau von Produktionsgewächshäusern zur kommerziellen Pflanzenproduktion und deren Fundamenten, unabhängig vom verwendeten Werkstoff.
Fragen der Feuerwiderstandsdauer werden in diesem Dokument nicht behandelt.

Serres - Calcul et construction - Partie 1 : Serres de production

Le présent document spécifie les principes et les exigences de résistance et de stabilité mécanique, d'aptitude au service et de durabilité applicables au calcul et à la construction des structures de serres de production, pour la production professionnelle de plantes (cultures), quel que soit le matériau utilisé, y compris les fondations.
Les aspects concernant la résistance au feu ne sont pas traités dans le présent document.

Rastlinjaki - Projektiranje in gradnja - 1. del: Proizvodni rastlinjaki

Ta evropski standard določa načela in zahteve za mehansko odpornost in obstojnost, uporabnost ter trajnost komercialnih proizvodnih rastlinjakov, ki jih je treba upoštevati pri projektiranju in gradnji konstrukcij rastlinjakov ne glede na material, vključno z njihovimi temelji, pri čemer se rastlinjaki uporabljajo za profesionalno proizvodnjo rastlin in poljščin. Standard ne zajema vidikov požarne odpornosti konstrukcij.

General Information

• Status: Published
• Publication Date: 17-Dec-2019
• Withdrawal Date: 29-Jun-2020
• ICS: 65.040.30 - Greenhouses and other installations
• Technical Committee: CEN/TC 284 - Greenhouses
• Drafting Committee: CEN/TC 284 - Greenhouses
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 18-Dec-2019
• Due Date: 02-May-2019
• Completion Date: 18-Dec-2019
• Ref Project: SIST EN 13031-1:2020 - Greenhouses - Design and construction - Part 1: Commercial production greenhouses

Relations

• Replaces: EN 13031-1:2001 - Greenhouses - Design and construction - Part 1: Commercial production greenhouses
• Effective Date: 08-Jun-2022
• Corrected By: EN 13031-1:2019/AC:2022 - Greenhouses - Design and construction - Part 1: Commercial production greenhouses
• Effective Date: 09-Feb-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13031-1:2020
01-februar-2020
Nadomešča:
SIST EN 13031-1:2004
Rastlinjaki - Projektiranje in gradnja - 1. del: Proizvodni rastlinjaki
Greenhouses - Design and construction - Part 1: Commercial production greenhouses
Gewächshäuser - Bemessung und Konstruktion - Teil 1: Kulturgewächshäuser
Serres - Calcul et construction - Partie 1: Serres de production
Ta slovenski standard je istoveten z: EN 13031-1:2019
ICS:
65.040.30 Rastlinjaki in druge naprave Greenhouses and other
installations
SIST EN 13031-1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13031-1:2020

---------------------- Page: 2 ----------------------
SIST EN 13031-1:2020


EN 13031-1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2019
EUROPÄISCHE NORM
ICS 65.040.30 Supersedes EN 13031-1:2001
English Version

Greenhouses - Design and construction - Part 1:
Commercial production greenhouses
Serres - Calcul et construction - Partie 1 : Serres de Gewächshäuser - Bemessung und Konstruktion - Teil 1:
production Produktionsgewächshäuser
This European Standard was approved by CEN on 19 May 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13031-1:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13031-1:2020
EN 13031-1:2019 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 8
4 Symbols and abbreviations . 9
5 Basis of design for greenhouse structures. 13
5.1 General. 13
5.2 Classes of greenhouse structures . 13
5.2.1 General. 13
5.2.2 Tolerance to frame displacements of the cladding system . 14
5.2.3 Design working life of the structure . 14
5.3 Reliability of commercial production greenhouses . 14
5.3.1 General classification, recommendations . 14
5.3.2 Partial factors γ .
...