Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)

ISO 19085-3:2017 gives the safety requirements and measures for numerically controlled (NC) boring machines, NC routing machines and NC combined boring/routing machines (as defined in 3.1), hereinafter referred to as "machines".
ISO 19085-3:2017 deals with all significant hazards, hazardous situations and events, listed in Clause 4, relevant to the machines when they are operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account.

Holzbearbeitungsmaschinen - Sicherheit - Teil 3: Numerisch gesteuerte (NC-) Bohr- und Fräsmaschinen (ISO 19085-3:2017)

Dieses Dokument stellt technische Sicherheitsanforderungen für numerisch gesteuerte (NC) Bohrmaschinen, NC-Fräsmaschinen und kombinierte NC-Bohr- und Fräsmaschinen (wie in 3.1 definiert), nachfolgend als -Maschinen- bezeichnet, zur Verfügung.
Dieses Dokument behandelt alle im Abschnitt 4 aufgeführten signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die auf die Maschinen zutreffen wenn sie bestimmungsgemäß und entsprechend den vorhersehbaren Bedingungen des Herstellers verwendet, eingestellt und gewartet werden, einschließlich des vernünftigerweise vorhersehbarem Fehlgebrauchs. Ferner wurden Transport, Zusammenbau, Demontage, Rückbau und Verschrottung berücksichtigt.
Dieses Dokument gilt auch für Maschinen, die mit einer oder mehreren der folgenden Baugruppen/Einrichtungen ausgerüstet sind:
- zusätzliche Ausrüstung zum Sägen, Schleifen, Anleimen von Kanten oder Montageaggregate und Dübeleinheiten;
- feststehende oder bewegliche Werkstückauflage;
- Werkstückspannung durch Mechanik, Pneumatik, Hydraulik oder Vakuum;
- automatische Werkzeugwechseleinrichtungen.
Die in diesem Dokument behandelten Maschinen sind gestaltet zur Bearbeitung von Werkstücken bestehend aus
—   Massivholz,
—   Werkstoffen mit gleichartigen physikalischen Eigenschaften wie Holz (siehe ISO 19085-1, 3.2),
—   Gipsplatten, mit Gips gebundene Faserplatten,
—   Verbundwerkstoffen mit einem Kern bestehend aus Polyurethan oder mineralischem Werkstoff mit Leichtmetallbeschichtung,
—   Polymer-Matrix-Verbundwerkstoffe und verstärkte Thermoplast-/Duroplast-/Elastomer-Werkstoffe, und
—   Verbundplatten, die aus den oben genannten Werkstoffen bestehen.
Dieses Dokument gilt nicht für einspindelige Oberfräsmaschinen mit Handvorschub/mechanischem Vorschub, Maschinen, die zur bestimmungsgemäßen Verwendung in potentiell explosiven Atmosphären vorgesehen sind oder für Maschinen, die vor seinem Ausgabedatum hergestellt wurden. Es behandelt auch nicht die spezifischen Gefährdungen in Bezug auf
—   an der Maschine angebrachte Ausrüstung zum Anleimen von Kanten,
—   die Verwendung von Schleifscheiben,
—   das Herausschleudern von Fräs- und/oder Sägewerkzeugen durch Öffnungen, die durch Vorhänge geschützt sind, an Maschinen, bei denen der Abstand zwischen der Werkstückauflage und der unteren Kante der Teilkapselung 600 mm übersteigt,
—   das Herausschleudern aufgrund des Bruchs von Fräswerkzeugen mit einem Flugkreisdurchmesser von 16 mm oder mehr und Sägewerkzeugen, die nicht EN 847-1 und EN 847-2 entsprechen,
—   die Kombination einer einzelnen Maschine mit irgendeiner anderen Maschine (als Teil einer Linie)
—   die Notwendigkeit, auf Grund seiner großen Abmessungen auf oder in den Maschinenkörper zu steigen, z. B. um Spannelemente an Maschinen zur Bearbeitung von Holzwänden einzustellen, und
—   integrierte Systeme zur Beladung/Entnahme von Werkstücken (z. B. Roboter).

Machines à bois - Sécurité - Partie 3: Perceuses et défonceuses à commande numérique (CN) (ISO 19085-3:2017)

L'ISO 19085-3 :2017 donne les exigences de sécurité et les mesures relatives aux perceuses à commande numérique (CN), aux défonceuses CN et aux perceuses/défonceuses combinées CN (telles que définies en 3.1), ci-après désignées «machines».
L'ISO 19085-3 :2017 traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu'énumérés à l'Article 4, applicables aux machines lorsqu'elles sont utilisées, réglées et entretenues comme prévu et dans les conditions prévues par le fabricant, incluant une mauvaise utilisation raisonnablement prévisible. Les phases de transport, d'assemblage, de démontage, de mise hors service et de mise au rebut ont également été prises en compte.

Lesnoobdelovalni stroji - Varnost - 3. del: Numerično krmiljeni (NC) vrtalni in rezkalni stroji (ISO 19085-3:2017)

Ta mednarodni standard obravnava vsa pomembna tveganja, nevarne razmere in dogodke iz točke 4, ki se nanašajo na numerično krmiljene vrtalne in rezalne stroje ter kombinirane numerično krmiljene vrtalne/rezalne stroje (kot so opredeljeni v točki 3.2.1), ki so v nadaljevanju poimenovani »stroji« in so namenjeni rezanju masivnega lesa in materialov s podobnimi fizičnimi lastnostmi kot les, kadar se upravljajo, prilagajajo in vzdržujejo skladno z njihovim namenom in pod pogoji, ki jih je določil proizvajalec, vključno z razumno predvidljivo nepravilno uporabo. Upoštevane so bile tudi faze transporta, sestavljanja, razstavljanja in razrezovanja stroja.

General Information

Status
Withdrawn
Publication Date
05-Dec-2017
Withdrawal Date
14-Dec-2021
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Dec-2021

Relations

Buy Standard

Standard
EN ISO 19085-3:2018
English language
76 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19085-3:2018
01-maj-2018
1DGRPHãþD
SIST EN 848-3:2012
/HVQRREGHORYDOQLVWURML9DUQRVWGHO1XPHULþQRNUPLOMHQL 1& YUWDOQLLQ
UH]NDOQLVWURML ,62
Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC)
boring and routing machines (ISO 19085-3:2017)
Holzbearbeitungsmaschinen - Sicherheit - Teil 3: NC-Bohr- und Fräsmaschinen (ISO
19085-3:2017)
Machines à bois - Sécurité - Partie 3: Perceuses et défonceuses à commande
numérique (ISO 19085-3:2017)
Ta slovenski standard je istoveten z: EN ISO 19085-3:2017
ICS:
25.040.20 âWHYLOþQRNUPLOMHQLVWURML Numerically controlled
machines
79.120.10 Lesnoobdelovalni stroji Woodworking machines
SIST EN ISO 19085-3:2018 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19085-3:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 19085-3:2018


EN ISO 19085-3
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2017
EUROPÄISCHE NORM
ICS 13.110; 79.120.10 Supersedes EN 848-3:2012
English Version

Woodworking machines - Safety requirements - Part 3:
Numerically controlled (NC) boring and routing machines
(ISO 19085-3:2017)
Machines à bois - Sécurité - Partie 3: Perceuses et Holzbearbeitungsmaschinen - Sicherheit - Teil 3: NC-
défonceuses à commande numérique (CN) (ISO 19085- Bohr- und Fräsmaschinen (ISO 19085-3:2017)
3:2017)
This European Standard was approved by CEN on 9 October 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19085-3:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19085-3:2018
EN ISO 19085-3:2017 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC . 4
2

---------------------- Page: 4 ----------------------

SIST EN ISO 19085-3:2018
EN ISO 19085-3:2017 (E)
European foreword
This document (EN ISO 19085-3:2017) has been prepared by Technical Committee ISO/TC 39 “Machine
tools” in collaboration with Technical Committee CEN/TC 142 “Woodworking machines - Safety” the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018, and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 848-3:2012.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
F
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.