Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016)

ISO 1421:2016 specifies two methods for the determination of the tensile strength of fabrics coated with rubber or plastics.
-      Method 1 ? the strip test method, which is a method for the determination of tensile strength and elongation at break.
-     Method 2 ? the grab test method, which is a method for the determination of tensile strength only.
The methods apply to test pieces in equilibrium with specific standard atmospheres for testing and to wet test pieces. Both methods require the use of a constant rate of extension (CRE) tensile-testing machine.

Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Zugfestigkeit und der Bruchdehnung (ISO 1421:2016)

Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la force de rupture et de l’allongement à la rupture (ISO 1421:2016)

L'ISO 1421 :2016 spécifie deux méthodes pour la détermination de la force de rupture des supports textiles revêtus de caoutchouc ou de plastique.
-      Méthode 1 - méthode sur bande préparée; il s'agit d'une méthode de détermination de la force de rupture et de l'allongement à la rupture.
-      Méthode 2 - méthode par arrachement; il s'agit d'une méthode de détermination de la force de rupture seule.
Les deux méthodes sont applicables à des éprouvettes en équilibre avec des atmosphères d'essai normales spécifiques, et à des éprouvettes mouillées. Les deux méthodes requièrent l'utilisation d'une machine d'essai de traction à vitesse constante d'allongement de l'éprouvette (CRE, pour « constant rate of extension »).

Gumirane ali plastificirane tekstilije - Ugotavljanje natezne trdnosti in pretržnega raztezka (ISO 1421:2016)

Ta mednarodni standard določa dve metodi za ugotavljanje natezne trdnosti
tkanin gumiranih ali plastificiranih tekstilij.
– Metoda 1 – preskusna metoda s tračnim preskušancem s polnim vpetjem, ki je metoda za ugotavljanje natezne trdnosti in
pretržnega raztezka.
– Metoda 2 – preskusna metoda s tračnim preskušancem z delnim vpetjem, ki je metoda, namenjena izključno za ugotavljanje natezne trdnosti.
Metode se uporabljajo za preskušance v ravnotežju s posebnimi standardnimi atmosferami za preskušanje in
za močenje preskušancev. Obe metodi zahtevata uporabo strojev za preskušanje natega s stalno stopnjo raztezanja
(CRE).

General Information

Status
Published
Publication Date
13-Dec-2016
Withdrawal Date
29-Jun-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
14-Dec-2016
Completion Date
14-Dec-2016

Relations

Buy Standard

Standard
EN ISO 1421:2017
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 1421:2015
German language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1421:2017
01-marec-2017
1DGRPHãþD
SIST EN ISO 1421:1999
Gumirane ali plastificirane tekstilije - Ugotavljanje natezne trdnosti in pretržnega
raztezka (ISO 1421:2016)
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at
break (ISO 1421:2016)
Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Zugfestigkeit und
der Bruchdehnung (ISO 1421:2016)
Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la force de
rupture et de l’allongement à la rupture (ISO 1421:2016)
Ta slovenski standard je istoveten z: EN ISO 1421:2016
ICS:
59.080.40 3RYUãLQVNRSUHYOHþHQH Coated fabrics
WHNVWLOLMH
SIST EN ISO 1421:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1421:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 1421:2017


EN ISO 1421
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2016
EUROPÄISCHE NORM
ICS 59.080.40 Supersedes EN ISO 1421:1998
English Version

Rubber- or plastics-coated fabrics - Determination of
tensile strength and elongation at break (ISO 1421:2016)
Supports textiles revêtus de caoutchouc ou de Mit Kautschuk oder Kunststoff beschichtete Textilien -
plastique - Détermination de la force de rupture et de Bestimmung der Zugfestigkeit und der Bruchdehnung
l'allongement à la rupture (ISO 1421:2016) (ISO 1421:2016)
This European Standard was approved by CEN on 17 September 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1421:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 1421:2017
EN ISO 1421:2016 (E)
Contents Page
European foreword . 3
2

---------------------- Page: 4 ----------------------

SIST EN ISO 1421:2017
EN ISO 1421:2016 (E)
European foreword
This document (EN ISO 1421:2016) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 248 “Textiles and textile
products” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2017, and conflicting national standards shall be
withdrawn at the latest by June 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 1421:1998.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 1421:2016 has been approved by CEN as EN ISO 1421:2016 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 1421:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 1421:2017
INTERNATIONAL
...

SLOVENSKI STANDARD
oSIST prEN ISO 1421:2015
01-junij-2015
Gumirane ali plastificirane tekstilije - Ugotavljanje natezne trdnosti in pretržnega
raztezka (ISO/DIS 1421:2015)
Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at
break (ISO/DIS 1421:2015)
Mit Kautschuk oder Kunststoff beschichtete Textilien - Bestimmung der Zugfestigkeit und
der Bruchdehnung (ISO/DIS 1421:2015)
Supports textiles revêtus de caoutchouc ou de plastique - Détermination de la force de
rupture et de l’allongement à la rupture (ISO/DIS 1421:2015)
Ta slovenski standard je istoveten z: prEN ISO 1421
ICS:
59.080.40 3RYUãLQVNRSUHYOHþHQH Coated fabrics
WHNVWLOLMH
oSIST prEN ISO 1421:2015 de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 1421:2015

---------------------- Page: 2 ----------------------
oSIST prEN ISO 1421:2015

EUROPÄISCHE NORM
ENTWURF
prEN ISO 1421
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2015
ICS 59.080.40 Vorgesehen als Ersatz für EN ISO 1421:1998
Deutsche Fassung
Mit Kautschuk oder Kunststoff beschichtete Textilien -
Bestimmung der Zugfestigkeit und der Bruchdehnung (ISO/DIS
1421:2015)
Rubber- or plastics-coated fabrics - Determination of tensile Supports textiles revêtus de caoutchouc ou de plastique -
strength and elongation at break (ISO/DIS 1421:2015) Détermination de la force de rupture et de l'allongement à la
rupture (ISO/DIS 1421:2015)
Dieser Europäische Norm-Entwurf wird den CEN-Mitgliedern zur parallelen Umfrage vorgelegt. Er wurde vom Technischen Komitee
CEN/TC 248 erstellt.

Wenn aus diesem Norm-Entwurf eine Europäische Norm wird, sind die CEN-Mitglieder gehalten, die CEN-Geschäftsordnung zu erfüllen, in
der die Bedingungen festgelegt sind, unter denen dieser Europäischen Norm ohne jede Änderung der Status einer nationalen Norm zu
geben ist.

Dieser Europäische Norm-Entwurf wurde vom CEN in drei offiziellen Fassungen (Deutsch, Englisch, Französisch) erstellt. Eine Fassung in
einer anderen Sprache, die von einem CEN-Mitglied in eigener Verantwortung durch Übersetzung in seine Landessprache gemacht und
dem Management-Zentrum des CEN-CENELEC mitgeteilt worden ist, hat den gleichen Status wie die offiziellen Fassungen.

CEN-Mitglieder sind die nationalen Normungsinstitute von Belgien, Bulgarien, Dänemark, Deutschland, der ehemaligen jugoslawischen
Republik Mazedonien, Estland, Finnland, Frankreich, Griechenland, Irland, Island, Italien, Kroatien, Lettland, Litauen, Luxemburg, Malta,
den Niederlanden, Norwegen, Österreich, Polen, Portugal, Rumänien, Schweden, der Schweiz, der Slowakei, Slowenien, Spanien, der
Tschechischen Republik, der Türkei, Ungarn, dem Vereinigten Königreich und Zypern.

Die Empfänger dieses Norm-Entwurfs werden gebeten, mit ihren Kommentaren jegliche relevante Patentrechte, die sie kennen, mitzuteilen
und unterstützende Dokumentationen zur Verfügung zu stellen.

Warnvermerk : Dieses Schriftstück hat noch nicht den Status einer Europäischen Norm. Es wird zur Prüfung und Stellungnahme
vorgelegt. Es kann sich noch ohne Ankündigung ändern und darf nicht als Europäischen Norm in Bezug genommen werden.


EUROPÄISCHES KOMITEE FÜR NORMUNG
EUROPEAN COMMITTEE FOR STANDARDIZATION

COMITÉ EUROPÉEN DE NORMALISATION

CEN-CENELEC Management-Zentrum: Avenue Marnix 17, B-1000 Brüssel
© 2015 CEN Alle Rechte der Verwertung, gleich in welcher Form und in welchem Ref. Nr. prEN ISO 1421:2015 D
Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 1421:2015
prEN ISO 1421:2015 (D)
Inhalt
Seite
Vorwort .3
1 Anwendungsbereich .4
2 Normative Verweisungen .4
3 Begriffe .4
4 Kurzbeschreibung .8
5 Geräte .8
6 Klima für Konditionierung und Prüfung .9
6.1 Klima für Prüfung.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.