Railway applications - Aerodynamics - Part 4: Requirements and test procedures for aerodynamics on open track

This European Standard deals with requirements, test procedures and conformity assessment for aerodynamics on open track. Addressed within this standard are the topics of aerodynamic loadings and resistance to motion, while the topic of cross wind assessment is addressed by EN 14067-6.
This European Standard refers to rolling stock and infrastructure issues. This standard does not apply to freight wagons. It applies to railway operation on gauges GA, GB and GC according to EN 15273. The methodological approach of the presented test procedures may be adapted to different gauges.

Bahnanwendungen - Aerodynamik - Teil 4: Anforderungen und Prüfverfahren für Aerodynamik auf offener Strecke

Diese Europäische Norm behandelt Anforderungen, Prüfverfahren und Konformitätsbewertungen für Aerody-namik auf offener Strecke. Im Rahmen dieser Norm werden die Themen aerodynamische Belastungen und Laufwiderstand angesprochen, während das Thema Seitenwind in EN 14067-6 behandelt wird.
Diese Europäische Norm gilt für die Belange von Fahrzeugen und Infrastruktur. Sie gilt nicht für Güterwagen. Sie gilt für den Eisenbahnbetrieb mit den Begrenzungslinien GA, GB und GC nach EN 15273. Der metho-dologische Ansatz der vorgestellten Prüfverfahren darf für andere Begrenzungslinien angepasst werden.

Applications ferroviaires - Aérodynamique - Partie 4: Exigences et procédures d'essai pour l'aérodynamique à l'air libre

La présente Norme européenne concerne les exigences, les procédures d'essai et l'évaluation de la conformité pour l'aérodynamique à l'air libre. Elle traite des chargements aérodynamiques et de la résistance à l'avancement, tandis que l'EN 14067 6 traite de l'évaluation des vents traversiers.
La présente Norme européenne fait référence au matériel roulant et à l'infrastructure. La présente Norme ne s'applique pas aux wagons. Elle s'applique à l'exploitation ferroviaire avec un gabarit GA, GB et GC conformément à l'EN 15273. L'approche méthodologique des procédures d'essai présentées peut être adaptée à un gabarit différent.

Železniške naprave - Aerodinamika - 4. del: Zahteve in preskusni postopki za aerodinamiko na odprti progi

General Information

Status
Not Published
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
18-Jan-2018
Due Date
24-Dec-2017
Completion Date
18-Jan-2018

Relations

Buy Standard

Draft
EN 14067-4:2014/oprA1:2018
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14067-4:2014/oprA1:2018
01-januar-2018
Železniške naprave - Aerodinamika - 4. del: Zahteve in preskusni postopki za
aerodinamiko na odprti progi
Railway applications - Aerodynamics - Part 4: Requirements and test procedures for
aerodynamics on open track
Bahnanwendungen - Aerodynamik - Teil 4: Anforderungen und Prüfverfahren für
Aerodynamik auf offener Strecke
Applications ferroviaires - Aérodynamique - Partie 4: Exigences et procédures d'essai
pour l'aérodynamique à l'air libre
Ta slovenski standard je istoveten z: EN 14067-4:2013/prA1:2017
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 14067-4:2014/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14067-4:2014/oprA1:2018

---------------------- Page: 2 ----------------------

SIST EN 14067-4:2014/oprA1:2018


DRAFT
EUROPEAN STANDARD
EN 14067-4:2013
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
October 2017
ICS 45.060.01
English Version

Railway applications - Aerodynamics - Part 4:
Requirements and test procedures for aerodynamics on
open track
Applications ferroviaires - Aérodynamique - Partie 4: Bahnanwendungen - Aerodynamik - Teil 4:
Exigences et procédures d'essai pour l'aérodynamique Anforderungen und Prüfverfahren für Aerodynamik
à l'air libre auf offener Strecke
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 14067-4:2013. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14067-4:2013/prA1:2017:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14067-4:2014/oprA1:2018
EN 14067-4:2013/prA1:2017 (E)
Contents Page
European foreword . 3
1 Modification to the European foreword . 4
2 Addition of Annex ZA, "Relationship between this European Standard and the
essential requirements of EU Directive 2008/57/EC aimed to be covered" . 4

2

---------------------- Page: 4 ----------------------

SIST EN 14067-4:2014/oprA1:2018
EN 14067-4:2013/prA1:2017 (E)
European foreword
This document (EN 14067-4:2013/prA1:2017) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2008/57/EC.
For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of
this document.
3

---------------------- Page: 5 ----------------------

SIST EN 14067-4:2014/oprA1:2018
EN 14067-4:2013/prA1:2017 (E)
1 Modification to the European foreword
Add the following two paragraphs:
"This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade As
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.