iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 6145-1:2008

(Main)

Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)

Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)

ISO 6145-1:2003 specifies the calibration methods involved in the preparation of gas mixtures by dynamic volumetric techniques. It also gives a brief presentation of a non-exhaustive list of examples of dynamic volumetric techniques which are described in more detail in other parts of ISO 6145.

Gasanalyse - Herstellung von Kalibriergasgemischen mit Hilfe von dynamisch-volumetrischen Verfahren - Teil 1: Kalibrierverfahren (ISO 6145-1:2003)

Dieser Teil der ISO 6145 legt die in die Herstellung von Kalibriergasgemischen mit Hilfe von dynamischvolumetrischen
Verfahren eingebundenen Kalibrierverfahren fest. Außerdem werden Beispiele für dynamischvolumetrische
Verfahren in Form einer keinen Anspruch auf Vollständigkeit erhebenden Liste kurz vorgestellt,
die in anderen Teilen der ISO 6145 detaillierter beschrieben sind.

Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de méthodes volumétriques dynamiques - Partie 1: Méthodes d'étalonnage (ISO 6145-1:2003)

L'ISO 6145-1:2003 spécifie les méthodes d'étalonnage impliquées dans la préparation des mélanges de gaz par des techniques volumétriques dynamiques. Elle présente également brièvement une liste non exhaustive d'exemples de techniques volumétriques dynamiques décrites plus en détails dans d'autres parties de l'ISO 6145.

Analiza plinov - Priprava kalibracijske plinske zmesi z uporabo dinamičnih volumetričnih metod - 1. del: Kalibracijske metode (ISO 6145-1:2003)

General Information

Status
Withdrawn
Publication Date
19-Aug-2008
Withdrawal Date
15-Oct-2019
ICS
71.040.40 - Chemical analysis
Technical Committee
CEN/SS N21 - Gaseous fuels and combustible gas
Drafting Committee
CEN/SS N21 - Gaseous fuels and combustible gas
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
16-Oct-2019
Ref Project
SIST EN ISO 6145-1:2008 - Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003)

Relations

Replaced By
EN ISO 6145-1:2019 - Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
Effective Date
23-Oct-2019

Buy Standard

EN ISO 6145-1:2008EN ISO 6145-1:2008
PreviousNext
Standard
EN ISO 6145-1:2008
English language
41 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6145-1:2008
01-oktober-2008
$QDOL]DSOLQRY3ULSUDYDNDOLEUDFLMVNHSOLQVNH]PHVL]XSRUDERGLQDPLþQLK
YROXPHWULþQLKPHWRGGHO.DOLEUDFLMVNHPHWRGH ,62
Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods
- Part 1: Methods of calibration (ISO 6145-1:2003)
Gasanalyse - Herstellung von Kalibriergasgemischen mit Hilfe von dynamisch-
volumetrischen Verfahren - Teil 1: Kalibrierverfahren (ISO 6145-1:2003)
Analyse des gaz - Préparation des mélanges de gaz pour étalonnage à l'aide de
méthodes volumétriques dynamiques - Partie 1: Méthodes d'étalonnage (ISO 6145-
1:2003)
Ta slovenski standard je istoveten z: EN ISO 6145-1:2008
ICS:
71.040.40 Kemijska analiza Chemical analysis
SIST EN ISO 6145-1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6145-1:2008

---------------------- Page: 2 ----------------------

SIST EN ISO 6145-1:2008
EUROPEAN STANDARD
EN ISO 6145-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2008
ICS 71.040.40

English Version
Gas analysis - Preparation of calibration gas mixtures using
dynamic volumetric methods - Part 1: Methods of calibration
(ISO 6145-1:2003)
Analyse des gaz - Préparation des mélanges de gaz pour Gasanalyse - Herstellung von Kalibriergasgemischen mit
étalonnage à l'aide de méthodes volumétriques Hilfe von dynamisch-volumetrischen Verfahren - Teil 1:
dynamiques - Partie 1: Méthodes d'étalonnage (ISO 6145- Kalibrierverfahren (ISO 6145-1:2003)
1:2003)
This European Standard was approved by CEN on 30 July 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6145-1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6145-1:2008
EN ISO 6145-1:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 6145-1:2008
EN ISO 6145-1:2008 (E)
Foreword
The text of ISO 6145-1:2003 has been prepared by Technical Committee ISO/TC 158 “Analysis of gases” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 6145-1:2008 by
Technical Committee CEN/SS N21 “Gaseous fuels and combustible gas” the secretariat of which is held by
CMC.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2009, and conflicting national standards shall be withdrawn
at the latest by February 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 6145-1:2003 has been approved by CEN as a EN ISO 6145-1:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 6145-1:2008

---------------------- Page: 6 ----------------------

SIST EN ISO 6145-1:2008


INTERNATIONAL ISO
STANDARD 6145-1
Second edi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17813:2023(Main)
Environmental solid matrices - Determination of halogens and sulfur by oxidative pyrohydrolytic combustion followed by ion chromatography
SIST EN 17813:2024

This document specifies an empirical method for the simultaneous direct determination of the fluorine, chlorine, bromine, and sulfur content in environmental solid matrices by oxidative pyrohydrolytic combustion at (1 050 ± 50) °C, followed by ion chromatography. The method is applicable for the determination of concentrations ≥ 10 mg/kg of each element based on dry matter. The upper limit and exact concentration range covered depends on the blank levels of the instrumentation and the capacity of the chromatographic separation column used for determination.
NOTE 1   Simultaneous determination of iodine content is possible but currently not validated.
NOTE 2   Other detection methods can be applied if validated.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17674:2021(Main)
Bio-based products- Use of stable isotope ratios of Carbon, Hydrogen, Oxygen and Nitrogen as tools for verification of the origin of bio-based feedstock and characteristics of production processes - Overview of relevant existing applications
SIST-TP CEN/TR 17674:2021

The stable isotope ratios of carbon, hydrogen, oxygen and nitrogen can be used to obtain information about the origin of bio-based feedstock and characteristics of production processes of bio-based products. However, no or limited attention for the use of the elements nitrogen and sulphur is given in this document due to the fact that these applications are not yet available.
This Technical Report provides an overview of existing applications of isotope ratio analysis of carbon, hydrogen, oxygen and nitrogen that are relevant to the analysis of bio-based feedstocks, products and production processes

  • Technical report
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6141:2015/A1:2020(Amendment)
Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020)
SIST EN ISO 6141:2015/A1:2020
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6145-1:2019(Main)
Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019)
SIST EN ISO 6145-1:2019

This document gives a brief overview of each of the dynamic techniques which are described in detail in the subsequent parts of ISO 6145. This document provides basic information to support an informed choice for one or another method for the preparation of calibration gas mixtures. It also describes how these methods can be linked to national measurement standards to establish metrological traceability for the composition of the prepared gas mixtures.
Since all techniques are dynamic and rely on flow rates, this document describes the calibration process by measurement of each individual flow rate generated by the device.
Methods are also provided for assessing the composition of the generated gas mixtures by comparison with an already validated calibration gas mixture.
This document provides general requirements for the use and operation of dynamic methods for gas mixture preparation. It also includes the necessary expressions for calculating the calibration gas composition and its associated uncertainty.
Gas mixtures obtained by these dynamic methods can be used to calibrate or control gas analysers.
The storage of dynamically prepared gas mixtures into bags or cylinders is beyond the scope of this document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17256:2019(Main)
Animal feeding stuffs: Methods of sampling and analysis - Determination of ergot alkaloids and tropane alkaloids in feed materials and compound feeds by LC-MS/MS
SIST EN 17256:2019

This document describes a method for the determination of individual ergot alkaloids and tropane alkaloids in unprocessed cereals and cereal-based compound feeds by high performance liquid chromatography with tandem mass spectrometry (LC-MS/MS).
This method has been successfully validated by collaborative trial in the following matrices: rye, barley, wheat, complete feed for bovine, porcine and poultry. Validation in buckwheat produced acceptable results, but the relative standard reproducibility was higher for most analytes in comparison with the other matrices. This may be related to the matrix. The validated range of the method is approximately 10 to 250 µg/kg for individual alkaloids. Determination of concentrations above 250 µg/kg is possible by applying a higher spiking level and dilution of the sample extract, but this has not been validated in the collaborative trial.
The method is applicable for the determination, by means of one-point standard addition to the sample, of ergocornine in the tested range of 12 µg/kg to 221 µg/kg, ergocorninine in the tested range of 9 µg/kg to 196 µg/kg, ergocristine in the tested range of 14 µg/kg to 312 µg/kg, ergocristinine in the tested range of 12 µg/kg to 258 µg/kg, α-ergocryptine in the tested range of 10 µg/kg to 184 µg/kg, α-ergocryptinine in the tested range of 8 µg/kg to 171 µg/kg, ergometrine in the tested range of 12 µg/kg to 174 µg/kg, ergometrinine in the tested range of 3 µg/kg to 172 µg/kg, ergosine in the tested range of 12 µg/kg to 226 µg/kg, ergosinine in the tested range of 9 µg/kg to 273 µg/kg, ergotamine in the tested range of 11 µg/kg to 443 µg/kg, ergotaminine in the tested range of 10 µg/kg to 273 µg/kg, atropine in the tested range of 16 µg/kg to 252 µg/kg and scopolamine in the tested range of 15 µg/kg to 246 µg/kg.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17421:2019(Main)
Animal feeding stuffs: Methods of sampling and analysis - Recommendations for the organization and evaluation of collaborative studies for multi-analyte methods of analysis
SIST-TP CEN/TR 17421:2019

This document gives guidance to those involved in designing, executing and evaluating interlaboratory comparison studies for multi-analyte methods of analysis, developed by CEN/TC 327 “Animal feeding stuffs: Methods of sampling and analysis” and its working groups.
For the validation of multi-analyte methods their particularities must be considered which might necessitate deviations from the prescribed validation protocols. This study provides information whether the method is fit for its purpose and which performance can be expected in practical work while at the same time keeping the necessary effort for the study organizer and the participating laboratories minimal.
Next to the abovementioned aspects regarding interlaboratory comparison studies, this document also gives guidance on the preceding steps, viz. in-house validation and preparation of the method protocol. Guidance is also given on the transferability of the method protocol and the familiarization with the method protocol through a training study, elements that – depending on the specific method – could be included in the design of the study.

  • Technical report
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17298:2019(Main)
Animal feeding stuffs - Methods of sampling and analysis - Determination of benzoic and sorbic acid by High Performance Liquid Chromatography (HPLC)
SIST EN 17298:2019

This document specifies a method for the determination of benzoic acid and sorbic acid in animal feeding stuffs by high-performance liquid chromatography method with ultraviolet detection (HPLC-UV).
The method is intended to be used for the determination of benzoic acid and sorbic acid as active substances in feed additives, premixtures, feed materials and compound feed and for benzoic acid in water. This method determines the total extractable concentration of these organic acids and their salts.
It is advisable that the working range of the method is determined for each organic acid by the user of this standard. The lower limit of the working range depends on the matrix and the interferences encountered. It is advisable that a working range between 5 mg/l and 100 mg/l is accessible.
The method was successfully tested in an inter-laboratory study in concentrations between 0,02 % up to 9,0 %.
On the basis of the referred working range, sample weight and extraction volume, limits of quantification (LOQ), as calculated (Table 1) on the basis of a wavelength of 230 nm, can be achievable.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17294:2019(Main)
Animal feeding stuffs - Methods of sampling and analysis - Determination of organic acids by Ion Chromatography with Conductivity Detection (IC-CD)
SIST EN 17294:2019

This document specifies a method for the determination of organic acids in animal feeding stuffs by Ion Chromatography with conductivity detection (IC-CD).
The method is intended to be used for the determination of formic acid, lactic acid, propionic acid, citric acid, fumaric acid and malic acid as active substances in feed additives, premixtures, feed materials, compound feed and water and for acetic acid in a limited manner in the same matrices. This method determines the total extractable concentration of the above mentioned organic acids and their salts.
It is advisable that the user of this standard determines the working range of the method for each organic acid. The lower limit of the working range depends on the matrix and the interferences encountered. It is advisable that a working range between 10 mg/l and 100 mg/l is achievable.
The method was successfully tested in an inter-laboratory study in concentrations between 0,02 % up to 27 % of the above mentioned organic acids.
NOTE   Limitation occurs during simultaneous determination of high concentration of lactic acid and low concentration of acetic acid. If the ratio of concentration of lactic acid to acetic acid exceeds factor 20, the determination of acetic acid is not guaranteed.
On the basis of the referred working range, sample weight and extraction volume, limits of quantification (LOQ), as calculated (Table 1) can be achievable.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6145-7:2018(Main)
Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018)
SIST EN ISO 6145-7:2019

ISO 6145 is a series of documents dealing with various dynamic methods used for the preparation of calibration gas mixtures. This document specifies a method for continuous preparation of calibration gas mixtures, from nominally pure gases or gas mixtures by use of thermal mass-flow controllers. The method is applicable to preparation of mixtures of non-reacting species, i.e. those which do not react with any material of construction of the flow path in the thermal mass-flow controller or the ancillary equipment.
If this method is employed for preparation of calibration gas mixtures the optimum performance is as follows: the relative expanded measurement uncertainty U, obtained by multiplying the standard uncertainty by a coverage factor k = 2, is not greater than 2 %.
If pre-mixed gases are used instead of pure gases, mole fractions below 10−6 can be obtained. The measurement of mass flow is not absolute and the flow controller requires independent calibration.
The merits of the method are that a large quantity of the calibration gas mixture can be prepared on a continuous basis and that multi-component mixtures can be prepared as readily as binary mixtures if the appropriate number of thermal mass-flow controllers is utilized.
NOTE       Gas blending systems, based upon thermal mass-flow controllers, and some including the facility of computerization and automatic control, are commercially available.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16785-2:2018(Main)
Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method
SIST EN 16785-2:2018

This part of EN 16785 specifies a method of determining the bio-based content in products using the material balance applied to a representative product batch in a production unit.
This European Standard is applicable to any solid, liquid and gaseous bio-based product containing carbon, obtained by chemical synthesis, mixing or assembling, provided that:
-   for a product batch, the composition of the product and the bio-based content of each input, output and loss  in the production unit are known; and
-   the bio-based content of the product is verifiable by analysis.
This method incorporates only the physical parts of the input and output stream as present in the final product, and does not incorporate material inputs for the energy to be used during the production process.
This method is not needed for the determination of the bio-based content in natural products wholly derived from biomass.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day