CEN/TR 17103:2017
(Main)Fast pyrolysis bio-oil for stationary internal combustion engines - Quality determination
Fast pyrolysis bio-oil for stationary internal combustion engines - Quality determination
This Technical Report describes the key properties of fast pyrolysis bio-oils and their importance to the fuel quality for use in stationary internal combustion engines.
Internal combustion engine (ICE) in the scope of this document means a type of engine in which heat energy and mechanical energy is produced inside the engine. ICE include compression ignition engines (diesel engines) and gas turbines.
Attention is drawn to differences especially in those properties, which can have an effect on the required engine performance, such as ash, acidity, viscosity, combustion properties, and sulfur content.
In addition to the quality requirements and related test methods for FPBO, further instructions on storage (Annex A), sampling (Clause 4), and materials compatibility (Annex B) are given.
NOTE For the purposes of this Technical Report, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction (µ) and the volume fraction (φ) of a material, respectively.
Pyrolyseprodukte - Schnell Pyrolyse-Bio-Öle für stationäre Verbrennungsmaschinen - Qualitätsbezeichnung
Pétrol et produits rélatives - Huiles biologique de pyrolyse rapide pour application en moteurs stationés avec combustion interne - Désignation de qualité
Bioolja, pridobljena s hitro pirolizo, za nepremične motorje z notranjim zgorevanjem - Specificiranje kakovosti
Ta dokument določa kakovost za trženo in dobavljeno gorivo za nepremične motorje, pridobljeno s postopki hitre pirolize olja. Uporablja se za olja, pridobljena s hitro pirolizo, za uporabo v nepremičnih motorjih z notranjim izgorevanjem in povezano opremo za proizvodnjo energije. Predstavlja alternativo ali komponento za mešanje v kurilnem olju, ki se uporablja za nepremično opremo.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 17103:2017
01-september-2017
%LRROMDSULGREOMHQDVKLWURSLUROL]R]DQHSUHPLþQHPRWRUMH]QRWUDQMLP
]JRUHYDQMHP6SHFLILFLUDQMHNDNRYRVWL
Fast pyrolysis bio-oil for stationary internal combustion engines - Quality determination
Pyrolyseprodukte - Schnell Pyrolyse-Bio-Öle für stationäre Verbrennungsmaschinen -
Qualitätsbezeichnung
Pétrol et produits rélatives - Huiles biologique de pyrolyse rapide pour application en
moteurs stationés avec combustion interne - Désignation de qualité
Ta slovenski standard je istoveten z: CEN/TR 17103:2017
ICS:
75.160.40 Biogoriva Biofuels
SIST-TP CEN/TR 17103:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 17103:2017
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 17103:2017
CEN/TR 17103
TECHNICAL REPORT
RAPPORT TECHNIQUE
May 2017
TECHNISCHER BERICHT
ICS 75.160.40
English Version
Petroleum and related products - Fast pyrolysis bio-oils
for stationary internal combustion engines - Quality
determination
Pétrol et produits rélatives - Huiles biologique de Pyrolyseprodukte - Schnell Pyrolyse-Bio-Öle für
pyrolyse rapide pour application en moteurs stationés stationäre Verbrennungsmaschinen -
avec combustion interne - Désignation de qualité Qualitätsbezeichnung
This Technical Report was approved by CEN on 11 April 2017. It has been drawn up by the Technical Committee CEN/TC 19.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 17103:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 17103:2017
CEN/TR 17103:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Sampling and sample handling . 7
5 Requirements and test methods . 8
5.1 General . 8
5.2 FPBO properties affecting internal combustion engines . 9
5.2.1 Water content . 9
5.2.2 Net calorific value . 9
5.2.3 pH . 10
5.2.4 Viscosity . 10
5.2.5 Density . 10
5.2.6 Pour point . 10
5.2.7 Nitrogen content .
...
SLOVENSKI STANDARD
kSIST-TP FprCEN/TR 17103:2017
01-maj-2017
1DIWDLQVRURGQLSURL]YRGL%LRROMDSULGREOMHQDVKLWURSLUROL]R]DQHSUHPLþQH
PRWRUMH]QRWUDQMLP]JRUHYDQMHP6SHFLILFLUDQMHNDNRYRVWL
Petroleum and related products - Fast pyrolysis bio-oils for stationary internal combustion
engines - Quality designation
Pyrolyseprodukte - Schnell Pyrolyse-Bio-Öle für stationäre Verbrennungsmaschinen -
Qualitätsbezeichnung
Ta slovenski standard je istoveten z: FprCEN/TR 17103
ICS:
75.160.40 Biogoriva Biofuels
kSIST-TP FprCEN/TR 17103:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST-TP FprCEN/TR 17103:2017
---------------------- Page: 2 ----------------------
kSIST-TP FprCEN/TR 17103:2017
FINAL DRAFT
TECHNICAL REPORT
FprCEN/TR 17103
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
January 2017
ICS 75.160.40
English Version
Petroleum and related products - Fast pyrolysis bio-oils
for stationary internal combustion engines - Quality
designation
Pyrolyseprodukte - Schnell Pyrolyse-Bio-Öle für
stationäre Verbrennungsmaschinen -
Qualitätsbezeichnung
This draft Technical Report is submitted to CEN members for Vote. It has been drawn up by the Technical Committee CEN/TC 19.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a Technical Report. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a Technical Report.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TR 17103:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST-TP FprCEN/TR 17103:2017
FprCEN/TR 17103:2017 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Sampling and sample handling . 7
5 Requirements and test methods . 7
5.1 General . 7
5.2 FPBO properties affecting internal combustion engines . 9
5.2.1 Water content . 9
5.2.2 Net calorific value . 9
5.2.3 pH . 9
5.2.4 Viscosity . 10
5.2.5 Density . 10
5.2.6 Pour point .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.