EN 45510-2-4:2000
(Main)Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors
Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors
This standard gives guidance on writing the technical specification for the procurement of static a.c. and d.c. high power convertors for use in electricity generating stations (power stations). This Guide for procurement is not applicable to equipment for use in the nuclear reactor plant area of nuclear power stations. Other possible applications of such equipment have not been considered
in the preparation of this Guide. This Guide covers each type of power convertor, i.e. rectifier, inverter, static excitation system, conversion of a.c. to a.c./d.c. to d.c. and switching, for the purpose of changing and/or controlling one or more characteristics.
This type of equipment is used for many applications such as motor drives and actuators, e.g. variable frequency starting equipment, a.c. and d.c. power supplies for computers and instrumentation, in chemical process plant, e.g. rectifiers for electrolysis in hydrogen production, in mechanical plant, e.g. electrostatic precipitators, etc. For additional, or specific, requirements for batteries, battery chargers or uninterruptible power supplies (UPS) refer to the relevant guides in this series. The equipment covered by this Guide is defined by its function rather than design type. Therefore, the guidance to the specification is stated in performance terms rather than being specified by a detailed description of the equipment to be supplied.
This Guide indicates to potential purchasers how their specification should be prepared so that:
- the equipment type and capacity interfaces correctly with other elements of the systems;
- predicted performance is achieved;
- ancillary equipment is properly sized;
- reliability, availability and safety requirements are achieved;
- proper consideration is given to the evaluation process and the quality measures to be applied.
This Guide does not determine the type of specification (e.g. detailed, performance, functional) or the extent of supply for any given contract which is
Leitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 2-4: Elektrische Ausrüstung - Statische Hochleistungsumrichter
Guide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 2-4: Equipements électriques - Convertisseurs de puissance
Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertorsLeitfaden für die Beschaffung von Ausrüstungen für Kraftwerke - Teil 2-4: Elektrische Ausrüstung - Statische HochleistungsumrichterGuide pour l'acquisition d'équipements destinés aux centrales de production d'électricité - Partie 2-4: Equipements électriques - Convertisseurs de puissanceGuide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors29.200QDSDMDQMHRectifiers. Convertors. Stabilized power supply27.100Elektrarne na splošnoPower stations in generalICS:Ta slovenski standard je istoveten z:EN 45510-2-4:2000SIST EN 45510-2-4:2000en01-maj-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.