EN ISO 9455-1:2022
(Main)Soft soldering fluxes - Test methods - Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:2022)
Soft soldering fluxes - Test methods - Part 1: Determination of non-volatile matter, gravimetric method (ISO 9455-1:2022)
This document specifies a gravimetric method for the determination of the content of non-volatile matter in soft soldering fluxes. It is applicable to liquid and paste fluxes of type 1, as defined in ISO 9454-1.
Flussmittel zum Weichlöten - Prüfverfahren - Teil 1: Bestimmung nichtflüchtiger Stoffe, gravimetrische Methode (ISO 9455-1:2022)
Dieses Dokument legt ein gravimetrisches Verfahren zur Bestimmung des Gehaltes von nichtflüchtigen Stoffen in Weichlotflussmitteln fest. Es ist anwendbar für flüssige und pastöse Flussmittel des Typs 1 nach ISO 9454 1.
Flux de brasage tendre - Méthodes d'essai - Partie 1: Dosage des matières non volatiles par gravimétrie (ISO 9455-1:2022)
Le présent document spécifie une méthode gravimétrique pour le dosage de la teneur en matières non volatiles dans les flux de brasage tendre. Il s’applique aux flux liquides et pâteux de type 1, comme défini dans l’ISO 9454-1.
Talila za mehko spajkanje - Preskusne metode - 1. del: Določevanje nehlapnih snovi, gravimetrijska metoda (ISO 9455-1:2022)
Standard določa gravimetrijsko metodo za določevanje vsebnosti nehlapnih snovi v talilih za mehko spajkanje. Uporablja se za tekoča talila in talila v obliki paste tipa 1, kot je opredeljeno v standardu ISO 9454-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9455-1:2023
01-marec-2023
Nadomešča:
SIST EN 29455-1:1998
Talila za mehko spajkanje - Preskusne metode - 1. del: Določevanje nehlapnih
snovi, gravimetrijska metoda (ISO 9455-1:2022)
Soft soldering fluxes - Test methods - Part 1: Determination of non-volatile matter,
gravimetric method (ISO 9455-1:2022)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 1: Bestimmung nichtflüchtiger Stoffe,
gravimetrische Methode (ISO 9455-1:2022)
Flux de brasage tendre - Méthodes d'essai - Partie 1: Dosage des matières non volatiles
par gravimétrie (ISO 9455-1:2022)
Ta slovenski standard je istoveten z: EN ISO 9455-1:2022
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9455-1:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 9455-1:2023
EN ISO 9455-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 25.160.50 Supersedes EN 29455-1:1993
English Version
Soft soldering fluxes - Test methods - Part 1:
Determination of non-volatile matter, gravimetric method
(ISO 9455-1:2022)
Flux de brasage tendre - Méthodes d'essai - Partie 1: Flussmittel zum Weichlöten - Prüfverfahren - Teil 1:
Dosage des matières non volatiles par gravimétrie (ISO Bestimmung nichtflüchtiger Stoffe, gravimetrische
9455-1:2022) Methode (ISO 9455-1:2022)
This European Standard was approved by CEN on 29 November 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9455-1:2023
EN ISO 9455-1:2022 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9455-1:2023
EN ISO 9455-1:2022 (E)
European foreword
This document (EN ISO 9455-1:2022) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 29455-1:1993.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 9455-1:2022 has been approved by CEN as EN ISO 9455-1:2022 wi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.