iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 20594-1:1993/AC:1996

(Corrigendum)

Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)

Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)

Kegelverbindungen mit einem 6% (Luer) Kegel für Spritzen, Kanülen und bestimmte andere medizinische Geräte - Teil 1: Allgemeine Anforderungen (ISO 594-1:1986)

Assemblages coniques à 6% (Luer) des seringues et aiguilles et de certains autres appareils à usage médical - Partie 1: Spécifications générales (ISO 594-1:1986)

Stožčaste spojke s 6-odstotnim (Luerjevim) nastavkom za injekcijske brizge, igle in nekatero drugo medicinsko opremo - 1. del: Splošne zahteve (ISO 594-1:1986)

General Information

Status
Withdrawn
Publication Date
17-Sep-1996
ICS
11.040.01 - Medical equipment in general
Technical Committee
CEN/TC 205 - Non-active medical devices
Drafting Committee
CEN/TC 205 - Non-active medical devices
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
31-May-2017
Directive
93/42/EEC - Council Directive 93/42/EEC of 14 June 1993 concerning medical devices
Mandate
M/023 - Standardization mandate to CEN/CENELEC concerning the development of European standards relating to medical devices
Ref Project
SIST EN 20594-1:2000/AC:2000 - Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)

Relations

Replaced By
EN ISO 80369-7:2017 - Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01)
Effective Date
07-Jun-2017
Corrects
EN 20594-1:1993 - Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986)
Effective Date
08-Jun-2022

Buy Standard

EN 20594-1:2000/AC:2000EN 20594-1:2000/AC:2000
PreviousNext
Corrigendum
EN 20594-1:2000/AC:2000
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kegelverbindungen mit einem 6% (Luer) Kegel für Spritzen, Kanülen und bestimmte andere medizinische Geräte - Teil 1: Allgemeine Anforderungen (ISO 594-1:1986)Assemblages coniques a 6% (Luer) des seringues et aiguilles et de certains autres appareils a usage médical - Partie 1: Spécifications générales (ISO 594-1:1986)Conical fittings with 6 % (Luer) taper for syringes,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 15378:2017/A1:2024(Amendment)
Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) - Amendment 1: Climate action changes (ISO 15378:2017/Amd 1:2024)
SIST EN ISO 15378:2018/A1:2024
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16571:2024(Main)
Systems for evacuation of plume generated by medical devices (ISO 16571:2024)
SIST EN ISO 16571:2024

This document specifies requirements and guidelines for systems and equipment used to evacuate plume generated by medical devices.
 This document applies to all types of plume evacuation systems (PESs), including
a)       portable;
b)       mobile;
c)        stationary, including dedicated central pipelines;
d)       PESs integrated into other equipment;
e)       PESs for endoscopic procedures (e.g., minimally invasive, laparoscopic)
This document applies to all healthcare facilities where PESs are used, including, but not limited to
a)       surgical facilities;
b)       medical offices;
c)        cosmetic treatment facilities;
d)       medical teaching facilities;
e)       dental clinics;
f)         veterinary facilities.
This document provides guidance on the following aspects of PESs:
a)       importance;
b)       purchasing;
c)        design;
d)       manufacture;
e)       documentation;
f)         function;
g)       performance;
h)       installation;
i)         commissioning;
j)         testing;
k)       training;
l)         use;
m)     risk assessment;
n)       servicing;
o)       maintenance.
This document does not apply to the following:
a)       anaesthetic gas scavenging systems (AGSSs) which are covered in ISO 7396-2;
b)       medical vacuum systems which are covered in ISO 7396-1;
c)        heating, ventilation, and air-conditioning (HVAC) systems;
d)       aspects of laser safety other than airborne contamination; and
e)       aspects of electrosurgery, electrocautery, and mechanical surgical tools other than airborne contamination produced by such equipment resulting from interaction with tissue or materials.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14971:2019/A11:2021(Amendment)
Medical devices - Application of risk management to medical devices (ISO 14971:2019)
SIST EN ISO 14971:2020/A11:2022

This document specifies terminology, principles and a process for risk management of medical devices, including software as a medical device and in vitro diagnostic medical devices. The process described in this document intends to assist manufacturers of medical devices to identify the hazards associated with the medical device, to estimate and evaluate the associated risks, to control these risks, and to monitor the effectiveness of the controls.
The requirements of this document are applicable to all phases of the life cycle of a medical device. The process described in this document applies to risks associated with a medical device, such as risks related to biocompatibility, data and systems security, electricity, moving parts, radiation, and usability.
The process described in this document can also be applied to products that are not necessarily medical devices in some jurisdictions and can also be used by others involved in the medical device life cycle.
This document does not apply to:
— decisions on the use of a medical device in the context of any particular clinical procedure; or
— business risk management.
This document requires manufacturers to establish objective criteria for risk acceptability but does not specify acceptable risk levels.
Risk management can be an integral part of a quality management system. However, this document does not require the manufacturer to have a quality management system in place.
NOTE Guidance on the application of this document can be found in ISO/TR 24971[9].

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15223-1:2021(Main)
Medical devices - Symbols to be used with information to be supplied by the manufacturer - Part 1: General requirements (ISO 15223-1:2021)
SIST EN ISO 15223-1:2021

This document specifies symbols used to express information supplied for a medical device. This document is applicable to symbols used in a broad spectrum of medical devices, that are available globally and need to meet different regulatory requirements.
These symbols can be used on the medical device itself, on its packaging or in the accompanying information. The requirements of this document are not intended to apply to symbols specified in other standards.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13485:2016/A11:2021(Amendment)
Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016)
SIST EN ISO 13485:2016/A11:2021
  • Amendment
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20417:2021(Main)
Medical devices - Information to be supplied by the manufacturer (ISO 20417:2021, Corrected version 2021-12)
SIST EN ISO 20417:2021

NOTE 1        There is guidance or rationale for this Clause contained in Clause A.2.
This document specifies the requirements for information supplied by the manufacturer for a medical device or by the manufacturer for an accessory, as defined in 3.1. This document includes the generally applicable requirements for identification and labels on a medical device or accessory, the packaging, marking of a medical device or accessory, and accompanying information. This document does not specify the means by which the information is to be supplied.
NOTE 2        Some authorities having jurisdiction impose different requirements for the identification, marking and documentation of a medical device or accessory.
Specific requirements of medical device product standards or group standards take precedence over requirements of this document.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 20416:2020(Main)
Medical devices - Post-market surveillance for manufacturers (ISO/TR 20416:2020)
SIST-TP CEN ISO/TR 20416:2020

This document provides guidance on the post-market surveillance process and is intended for use by medical device manufacturers. This post-market surveillance process is consistent with relevant international standards, in particular ISO 13485 and ISO 14971. This document describes a proactive and systematic process that manufacturers can use to collect and analyse appropriate data, to provide information for the feedback processes and use this to meet applicable regulatory requirements to gain experience from the post-production activities. The output of this process can be used:
—     as input into product realization;
—     as input into risk management;
—     for monitoring and maintaining product requirements;
—     for communicating to regulatory authorities; or
—     as input into improvement processes.
This document does not address market surveillance activities to be performed by regulatory authorities. Neither does it specify a manufacturer's actions required by the applicable regulatory requirements resulting from their production or post-production activities, nor reporting to regulatory authorities. This document is not intended to replace or change applicable regulatory requirements for post-market surveillance.

  • Technical report
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 24971:2020(Main)
Medical devices - Guidance on the application of ISO 14971 (ISO/TR 24971:2020)
SIST-TP CEN ISO/TR 24971:2020

This document provides guidance on the development, implementation and maintenance of a risk management system for medical devices according to ISO 14971:2019.
The risk management process can be part of a quality management system, for example one that is based on ISO 13485:2016[24], but this is not required by ISO 14971:2019. Some requirements in ISO 13485:2016 (Clause 7 on product realization and 8.2.1 on feedback during monitoring and measurement) are related to risk management and can be fulfilled by applying ISO 14971:2019. See also the ISO Handbook: ISO 13485:2016 — Medical devices — A practical guide[25].

  • Technical report
    96 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13718-1:2014+A1:2020(Main + Amendment)
Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances
SIST EN 13718-1:2015+A1:2020

This European Standard specifies general requirements for medical devices carried in air ambulances and used therein and outside hospitals and clinics in situations where the ambient conditions can differ from normal indoor conditions. This European Standard does not cover the requirements for approval and registration of the vehicle and the training of the staff which is the responsibility of the authority/authorities in the country where the ambulance is to be registered.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13718-2:2015+A1:2020(Main + Amendment)
Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances
SIST EN 13718-2:2015+A1:2020

This part of EN 13718 specifies the requirements for performance and equipping for air ambulances, including requirements for interfaces to medical devices used for the transport and treatment of sick or injured persons. This part of EN 13718 is applicable to air ambulances capable of transporting at least one person on a stretcher.
NOTE   Requirements are specified for categories of air ambulances based on the different intended use. These are the helicopter emergency medical service (HEMS) the helicopter intensive care medical service (HICAMS) and the fixed wing air ambulance (FWAA).

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day