EN ISO 23537-1:2016/A1:2018
(Amendment)Requirements for sleeping bags - Part 1: Thermal and dimensional requirements - Amendment 1 (ISO 23537-1:2016/Amd 1:2018)
Requirements for sleeping bags - Part 1: Thermal and dimensional requirements - Amendment 1 (ISO 23537-1:2016/Amd 1:2018)
2018-01-09 - TC decision is missing to skip Formal Vote. email sent to TC requesting TC decision on 2018-01-09. email saved on network (standards).
2018-01-10 - TC decision received to skip FV.
Anforderungen an Schlafsäcke - Teil 1: Thermische Anforderungen und Abmessungen - Änderung 1 (ISO 23537-1:2016/Amd 1:2018)
Exigences pour les sacs de couchage - Partie 1: Exigences thermiques et dimensionnelles - Amendement 1 (ISO 23537-1:2016/Amd 1:2018)
Zahteve za spalne vreče - 1. del: Toplotne in dimenzijske zahteve - Dopolnilo A1 (ISO 23537-1:2016/Amd1:2018)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2018
=DKWHYH]DVSDOQHYUHþHGHO7RSORWQHLQGLPHQ]LMVNH]DKWHYH'RSROQLOR$
,62$PG
Requirements for sleeping bags - Part 1: Thermal and dimensional requirements -
Amendment 1 (ISO 23537-1:2016/Amd1:2018)
Anforderungen an Schlafsäcke - Teil 1: Thermische Anforderungen und Abmessungen -
Änderung 1 (ISO 23537-1:2016/Amd 1:2018)
Exigences pour les sacs de couchage - Partie 1: Exigences thermiques et
dimensionnelles - Amendement 1 (ISO 23537-1:2016/Amd1:2018)
Ta slovenski standard je istoveten z: EN ISO 23537-1:2016/A1:2018
ICS:
97.200.30 Oprema za taborjenje in Camping equipment and
tabori camp-sites
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 23537-1:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 97.200.30
English Version
Requirements for sleeping bags - Part 1: Thermal and
dimensional requirements - Amendment 1 (ISO 23537-
1:2016/Amd 1:2018)
Exigences pour les sacs de couchage - Partie 1: Anforderungen an Schlafsäcke - Teil 1: Thermische
Exigences thermiques et dimensionnelles - Anforderungen und Abmessungen - Änderung 1 (ISO
Amendement 1 (ISO 23537-1:2016/Amd 1:2018) 23537-1:2016/Amd 1:2018)
This amendment A1 modifies the European Standard EN ISO 23537-1:2016; it was approved by CEN on 13 February 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 23537-1:2016/A1:2018 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 23537-1:2016/A1:2018) has been prepared by Technical Committee ISO/TC 83
"Sports and other recreational facilities and equipment" in collaboration with Technical Committee
CEN/TC 136 “Sports, playground and other recreational facilities and equipment” the secretariat of
which is held by DIN.
This Amendment to the European Standard EN ISO 23537-1:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by August 2018, and
conflicting national standards shall be withdrawn at the latest by August 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cypru
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.