Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes

This European Standard specifies the technical delivery conditions for welded cold sized steel tubes of circular cross section for precision applications with specified outside diameter D ≤ 193,7 mm.
This document may also be applied to other types (excluding square and rectangular) of cross section.
Tubes according to this document are characterized by having precisely defined tolerances on dimensions and a specified maximum surface roughness. Typical fields of application are in the vehicle, furniture and general engineering industries.

Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre

Diese Europäische Norm enthält die technischen Lieferbedingungen für geschweißte maßgewalzte Präzi¬sions-rohre aus Stahl mit kreisförmigem Querschnitt und einem Nennaußendurchmesser D  193,7 mm.
ANMERKUNG   Dieses Dokument darf auch für andere (mit Ausnahme quadratischer und rechteckiger) Querschnitts-arten angewendet werden.
Rohre nach diesem Dokument sind durch genau definierte Grenzabmaße und eine festgelegte maxi¬male Oberflächenrauheit charakterisiert. Typische Anwendungsgebiete sind der Fahrzeugbau, die Möbel¬industrie und der Allgemeine Maschinenbau.

Tubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froid

La présente Norme européenne spécifie les conditions techniques de livraison pour les tubes en acier soudés calibrés à froid, de section circulaire, destinés aux applications de précision avec un diamètre extérieur spécifié D ≤ 193,7 mm.
Le présent document peut aussi s'appliquer à d'autres types de section (à l'exclusion des carrés et rectangulaires).
Les tubes conformes au présent document se caractérisent par des tolérances dimensionnelles précises et par une rugosité maximale spécifiée. Les domaines typiques d'application se situent dans le secteur automobile, l'ameublement et l'ingénierie générale.

Jeklene cevi za precizno uporabo - Tehnični dobavni pogoji - 3. del: Varjene hladno dimenzionirane cevi

Ta evropski standard določa tehnične dobavne pogoje za varjene hladno dimenzionirane cevi s krožnim prečnim prerezom za precizno uporabo z določenim zunanjim premerom D ≤ 193,7 mm.
OPOMBA:   Ta dokument se lahko uporablja tudi za druge vrste prečnih prerezov (razen kvadratne in pravokotne).
Cevi v skladu s tem dokumentom imajo natančno opredeljene tolerance za mere in določeno največjo površinsko hrapavost. Tipična področja uporabe so v avtomobilski in pohištveni industriji ter v splošnem inženirstvu.

General Information

Status
Withdrawn
Publication Date
29-Mar-2016
Withdrawal Date
05-Dec-2023
Current Stage

Relations

Buy Standard

Standard
EN 10305-3:2016
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 10305-3:2015
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte RohreTubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froidSteel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:EN 10305-3:2016SIST EN 10305-3:2016en,fr,de01-oktober-2016SIST EN 10305-3:2016SLOVENSKI
STANDARDSIST EN 10305-3:20101DGRPHãþD



SIST EN 10305-3:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10305-3
March
t r s x ICS
y yä s v rä y w Supersedes EN
s r u r wæ uã t r s rEnglish Version
Steel tubes for precision applications æ Technical delivery conditions æ Part
uã Welded cold sized tubes Tubes de prßcision en acier æ Conditions techniques de livraison æ Partie
u ã Tubes soudßs calibrßs à froid
Präzisionsstahlrohre æ Technische Lieferbedingungen æTeil
uã Geschweißte maßgewalzte Rohre This European Standard was approved by CEN on
s z January
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r u r wæ uã t r s x ESIST EN 10305-3:2016



EN 10305-3:2016 (E) 2 Contents Page European foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Symbols . 7 5 Classification and Designation . 7 5.1 Classification . 7 5.2 Designation. 7 6 Information to be supplied by the purchaser . 7 6.1 Mandatory information . 7 6.2 Options . 7 6.3 Example of an order . 8 7 Manufacturing process . 9 7.1 Steelmaking process . 9 7.2 Tube manufacture and delivery conditions . 9 8 Requirements .
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte RohreTubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froidSteel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific useICS:Ta slovenski standard je istoveten z:FprEN 10305-3 revkSIST FprEN 10305-3:2015en,fr,de01-oktober-2015kSIST FprEN 10305-3:2015SLOVENSKI
STANDARD



kSIST FprEN 10305-3:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 10305-3
July 2015 ICS 77.140.75 Will supersede EN 10305-3:2010English Version
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
Tubes de précision en acier - Conditions techniques de livraison - Partie 3 : Tubes soudés calibrés à froid
Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 3: Geschweißte maßgewalzte Rohre This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee ECISS/TC 110.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 10305-3:2015 EkSIST FprEN 10305-3:2015



FprEN 10305-3:2015 (E) 2 Contents Page Foreword .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Symbols .6 5 Classification and Designation .7 5.1 Classification .7 5.2 Designation .7 6 Information to be supplied by the purchaser .7 6.1 Mandatory information .7 6.2 Options .7 6.3 Example of an order .8 7 Manufacturing process .8 7.1 Steelmaking process .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.