CEN/TS 15916-1:2011

Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS)

This Technical Specification specifies a flame atomic absorption spectrometric method (FAAS) for the determination of the tellurium content of copper and copper alloys in form of castings or unwrought or wrought products.
The method is applicable to products having tellurium mass fractions between 0,000 2 % and 0,020 %.

Kupfer und Kupferlegierungen - Bestimmung des Tellurgehaltes - Teil 1: Niedriger Tellurgehalt - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS)

Diese Technische Spezifikation legt ein flammenatomabsorptionsspektrometrisches Verfahren (FAAS) für die Bestimmung des Tellurgehaltes in Kupfer und Kupferlegierungen fest, die als Gussstücke oder als plastisch oder nicht plastisch geformte Produkte vorliegen. Das Verfahren ist geeignet für Produkte mit Tellur-Massenanteilen zwischen 0,000 2 % und 0,020 %.

Cuivre et alliages de cuivre - Détermination du tellure - Partie 1: Tellure en faible teneur - Méthode par spectrométrie d'absorption atomique dans la flamme (SAAF)

La présente Spécification technique spécifie une méthode par spectrométrie d’absorption atomique dans la flamme (SAAF) pour la détermination du tellure dans le cuivre et les alliages de cuivre, sous forme de produits non corroyés, corroyés et moulés.
La méthode s’applique aux produits ayant des teneurs en tellure (fraction en masse) comprises entre 0,000 2 % et 0,020 %.

Baker in bakrove zlitine - Določevanje telurja - 1. del: Majhna koncentracije telurja - Metoda z uporabo spektrometrije s plamensko atomsko absorpcijo (FAAS)

Ta tehnična specifikacija določa metodo z uporabo spektrometrije s plamensko atomsko absorpcijo (FAAS) za določevanje telurja v bakru in bakrovih zlitinah v obliki ulitih ali negnetenih oziroma gnetenih polizdelkov. Metoda velja za polizdelke z masnim deležem telurja med 0,0002 % in 0,020 %.

General Information

• Status: Published
• Publication Date: 15-Feb-2011
• ICS: 77.120.30 - Copper and copper alloys
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 10 - Methods of analysis
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 15-Sep-2023
• Ref Project: SIST-TS CEN/TS 15916-1:2012 - Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content – Flame atomic absorption spectrometric method (FAAS)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 15916-1:2012
01-januar-2012
%DNHULQEDNURYH]OLWLQH'RORþHYDQMHWHOXUMDGHO0DMKQDNRQFHQWUDFLMHWHOXUMD
0HWRGD]XSRUDERVSHNWURPHWULMHVSODPHQVNRDWRPVNRDEVRUSFLMR)$$6
Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium
content – Flame atomic absorption spectrometric method (FAAS)
Kupfer und Kupferlegierungen - Bestimmung des Tellurgehaltes - Teil 1: Niedriger
Tellurgehalt - Flammenatomabsorptionsspektrometrisches Verfahren (FAAS)
Cuivre et alliages de cuivre - Dosage du tellure - Partie 1: Tellure en faible teneur -
Méthode par spectrométrie d'absorption atomique dans la flamme
Ta slovenski standard je istoveten z: CEN/TS 15916-1:2011
ICS:
77.040.30 Kemijska analiza kovin Chemical analysis of metals
77.120.30 Baker in bakrove zlitine Copper and copper alloys
SIST-TS CEN/TS 15916-1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 15916-1:2012

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 15916-1:2012


TECHNICAL SPECIFICATION
CEN/TS 15916-1

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
February 2011
ICS 77.120.30
English Version
Copper and copper alloys - Determination of tellurium content -
Part 1: Low tellurium content - Flame atomic absorption
spectrometric method (FAAS)
Cuivre et alliages de cuivre - Détermination du tellure - Kupfer und Kupferlegierungen - Bestimmung des
Partie 1: Tellure en faible teneur - Méthode par Tellurgehaltes - Teil 1: Niedriger Tellurgehalt -
spectrométrie d'absorption atomique dans la flamme Flammenatomabsorptionsspektrometrisches Verfahren
(SAAF) (FAAS)
This Technical Specification (CEN/TS) was approved by CEN on 11 October 2010 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 15916-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 15916-1:2012
CEN/TS 15916-1:2011 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Principle .4
4 Reagents .4
5 Apparatus .5
6 Sampling .5
7 Procedure .5
8 Expression of results .8
9 Precision .9
10 Test report .
...