Copper and copper alloys - European numbering system

This draft European Standard establishes a numbering system for designation copper or copper alloys manufactured and/or used in Europe and the responsibility for the allocation and administration of numbers for individual copper materials.
The system is applicable to copper materials standardized in European Standards.

Kupfer und Kupferlegierungen - Europäisches Werkstoffnummernsystem

Diese Europäische Norm stellt ein Werkstoffnummernsystem zur Bezeichnung von in Europa hergestellten und/oder verwendeten Kupfer und Kupferlegierungen auf und legt die Zuständigkeit für Zuordnung und Verwaltung von Werkstoffnummern für die einzelnen Kupferwerkstoffe fest.
Das Nummernsystem ist auf Kupferwerkstoffe anwendbar, die in Europäischen Normen festgelegt sind.

Cuivre et alliages de cuivre - Système européen de désignation numérique

La présente Norme européenne établit un système numérique permettant de désigner le cuivre ou les alliages de cuivre fabriqués et/ou utilisés en Europe, et la responsabilité de l'attribution et de la gestion des numéros correspondant à chaque matériau de cuivre.
Le système s'applique aux matériaux de cuivre spécifiés dans les Normes européennes.

Baker in bakrove zlitine - Evropski številčni sistem označevanja

Ta osnutek evropskega standarda vzpostavlja številčni sistem označevanja bakra ali bakrovih zlitin, ki se proizvajajo in/ali uporabljajo v Evropi, in odgovornost za dodeljevanje in upravljanje številk posameznih bakrenih materialov.
Ta sistem se uporablja za bakrene materiale, standardizirane v evropskih standardih.

General Information

Publication Date
Withdrawal Date
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date


Buy Standard

EN 1412:2017
English language
7 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kupfer und Kupferlegierungen - Europäisches WerkstoffnummernsystemCuivre et alliages de cuivre - Système européen de désignation numériqueCopper and copper alloys - European numbering system77.120.30Baker in bakrove zlitineCopper and copper alloysICS:Ta slovenski standard je istoveten z:EN 1412:2016SIST EN 1412:2017en,fr,de01-januar-2017SIST EN 1412:2017SLOVENSKI

SIST EN 1412:2017

EN 1412
t r s x ICS
y yä s t rä u r Supersedes EN
s v s tã s { { wEnglish Version
Copper and copper alloys æ European numbering system Cuivre et alliages de cuivre æ Système européen de désignation numérique
Kupfer und Kupferlegierungen æ Europäisches Werkstoffnummernsystem This European Standard was approved by CEN on
u r September
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s v s tã t r s x ESIST EN 1412:2017

EN 1412:2016 (E) 2 Contents Page European foreword . 3 Introduction . 4 1 Scope . 5 2 Terms and definitions . 5 3 Details of the system . 5 3.1 General . 5 3.2 Structure of numbers . 5 3.2.1 Complete number . 5 3.2.2 Position of characters . 5 4 Allocation and administration of material numbers . 6 Bibliography . 7
Tables Table 1 — Significance of positions 3 to 6 . 6
SIST EN 1412:2017

EN 1412:2016 (E) 3 European foreword This document (EN 1412:2016) has been prepared by Technical Committee CEN/TC 133 “Copper and copper alloys”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2017, and conflicting national standards shall be withdrawn at the latest by May 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1412:1995. In comparison with EN 1412:1995, the following significant changes were made: a) allocation of ranges for the numeric part of a material number to mate

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.