EN 14058:2017
(Main)Protective clothing - Garments for protection against cool environments
Protective clothing - Garments for protection against cool environments
This European Standard specifies requirements and test methods for the performance of garments for protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise not only low air temperatures, but also humidity and air velocity.
Cold protective ensembles are excluded from this standard.
The protective effects and requirements of footwear, gloves and separate head wear are excluded from the scope of this standard.
Schutzkleidung - Kleidungsstücke zum Schutz gegen kühle Umgebungen
Diese Europäische Norm legt die Anforderungen an und die Prüfverfahren für die Gebrauchseigenschaften von Kleidungsstücken zum Schutz gegen die Auswirkungen von kühlen Umgebungen mit Temperaturen oberhalb − 5 °C fest (siehe Anhang C). Diese Effekte umfassen nicht nur niedrige Lufttemperaturen, sondern auch Feuchte und Windgeschwindigkeit.
Kälteschutz-Kleidungssysteme sind von dieser Norm ausgeschlossen.
Die Schutzwirkungen und Anforderungen an Schuhe, Handschuhe sowie eine separate Kopfbedeckung fallen nicht in den Anwendungsbereich dieser Norm.
Habillement de protection - Vêtements de protection contre les environnements frais
La présente Norme européenne spécifie des exigences et des méthodes d'essai relatives aux performances des vêtements pour la protection contre les effets d’environnements frais à des températures supérieures à −5 °C (voir l’Annexe C). Ces effets comprennent non seulement les basses températures de l’air, mais également l’humidité et la vitesse de l’air.
Les ensembles de protection contre le froid sont exclus du domaine d’application de la présente norme.
Les effets protecteurs des chaussures, des gants et des couvre-chefs indépendants, ainsi que les exigences s'y rapportant, sont exclus du domaine d'application de la présente norme.
Varovalna obleka - Oblačila za zaščito v hladnih okoljih
Ta dokument določa zahteve in preskusne metode za učinkovitost kompletov oblačil (tj. dvodelna obleka ali kombinezon) in kosov oblačil za zaščito proti vplivom hladnih okolij (glej dodatek B). Dokument ne zajema posebnih zahtev za pokrivala, obutev ali rokavice za preprečevanje ohlajanja posameznih delov. Za te vplive se uporabljajo standardi za posamezne proizvode.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2018
1DGRPHãþD
SIST EN 14058:2004
9DURYDOQDREOHND2EODþLOD]D]DãþLWRYKODGQLKRNROMLK
Protective clothing - Garments for protection against cool environments
Schutzkleidung - Kleidungsstücke zum Schutz gegen kühle Umgebungen
Vêtements de protection - Articles d'habillement de protection contre les environnements
frais
Ta slovenski standard je istoveten z: EN 14058:2017
ICS:
13.340.10 Varovalna obleka Protective clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 14058
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2017
EUROPÄISCHE NORM
ICS 13.340.10 Supersedes EN 14058:2004
English Version
Protective clothing - Garments for protection against cool
environments
Habillement de protection - Vêtements de protection Schutzkleidung - Kleidungsstücke zum Schutz gegen
contre les environnements frais kühle Umgebungen
This European Standard was approved by CEN on 4 September 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14058:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Performance assessment and requirements . 8
4.1 General requirements and innocuousness . 8
4.1.1 General requirements . 8
4.1.2 Innocuousness . 9
4.2 Thermal Resistance, R . 9
ct
4.3 Air permeability, AP . 9
4.4 Resistance to water penetration, WP . 10
4.5 Water vapour resistance, R . 10
et
4.6 Resultant effective thermal insulation, I . 10
cler
4.7 Mechanical and physical properties . 10
4.7.1 Tear resistance of outer shell material . 10
4.7.2 Burst strength of knitted outer shell material . 10
4.8 Dimensional change due to cleaning. 10
5 Pre-treatment . 10
6 Test methods . 11
6.1 Sampling . 11
6.2 General requirements and innocuousness . 11
6.2.1 General requirements . 11
6.2.2 Innocuousness . 11
6.3 Thermal resistance, R . 11
ct
6.4 Air permeability, AP . 11
6.5 Resistance to water penetration, WP . 11
6.6 Water vapour resistance, R . 11
et
6.7 Resultant effective thermal insulation, I . 11
cler
6.8 Mechanical and physical properties . 12
6.8.1 Tear resistance of outer shell material . 12
6.8.2 Burst strength of knitted outer shell material . 12
6.9 Dimensional change due to cleaning. 12
7 Size designation . 12
8 Marking and care labelling . 12
9 Information supplied by the manufacturer . 12
Annex A (informative) Significant changes between this document and the previous edition . 14
Annex B (normative) Standard ensemble R for the testing of protective garments against
cool environments . 15
Annex C (informative) Temperature ranges of utility . 17
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of EU Directive 89/686/EEC aimed to be covered . 20
Annex ZB (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered . 21
Bibliography . 22
European foreword
This document (EN 14058:2017) has been prepared by Technical Committee CEN/TC 162 “Protective
clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be
withdrawn at the latest by May 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14058:2004.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA and ZB, which are an integral part of
this document.
Regarding the most significant changes that have been made in this new edition, see Annex A.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Introduction
In many cases single garments are placed on the market to protect against local body cooling (for
ensembles see EN 342). These garments can be e.g. waistcoats, jackets, coats or trousers and/or
separable thermal linings. They can provide a certain degree of protection to cool environment for a
certain length of time, depending e.g. on the personal constitution and activity, the accompanying
clothing and the environmental features (wind speed, temperature, humidity). In critical situations
(e.g. combination of cold, moisture and wind, long exposure duration, no help nearby) it is important to
assess the cold protection properties of the garment (see Annex C), especially if the user cannot safely
identify the risk at moderate low temperatures above −5 °C in an appropriate time.
At moderate low temperatures above −5 °C garments against local body cooling are not only used for
outdoor activities e.g. in construction industry but can be used for indoor activities e.g. in food
processing industry. In these cases garments often do not need to be made of watertight or air
impermeable materials. Therefore, in this European Standard, these requirements are applicable if the
manufacturer claims in his instructions for use protection for hazards covered by these properties.
The resultant effective thermal insulation value I can be used to assess temperature ranges
cler
according to Tables C.1 and C.2.
If exposure to wet conditions is expected, EN 343 applies.
1 Scope
This European Standard specifies requirements and test methods for the performance of garments for
protection against the effects of cool environments above −5 °C (see Annex C). These effects comprise
not only low air temperatures, but also humidity and air velocity.
Cold protective ensembles are excluded from this standard.
The protective effects and requirements of footwear, gloves and separate head wear are excluded from
the scope of this standard.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
EN 342:2017, Protective clothing — Ensembles and garments for protection against cold
EN 20811:1992, Textiles - Determination of resistance to water penetration - Hydrostatic pressure test
EN ISO 4674-1:2016, Rubber- or plastics-coated fabrics — Determination of tear resistance —- Part 1:
Constant rate of tear methods (ISO 4674-1:2016)
EN ISO 9237:1995, Textiles - Determination of permeability of fabrics to air (ISO 9237:1995)
EN ISO 11092:2014, Textiles - Physiological effects - Measurement of thermal and water-vapour
resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:2014)
EN ISO 13688:2013, Protective clothing - General requirements (ISO 13688:2013)
EN ISO 13938-1:1999, Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for
determination of bursting strength and bursting distension (ISO 13938-1:1999)
EN ISO 13938-2:1999, Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for
determination of bursting strength and bursting distension (ISO 13938-2:1999)
EN ISO 15831:2004, Clothing - Physiological effects - Measurement of thermal insulation by means of a
thermal manikin (ISO 15831:2004)
ISO 7000:2014, Graphical symbols
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.