EN 14220:2006
(Main)Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications
Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specifications
This European Standard specifies principle material requirements for timber and wood-based products in external windows, external door leaves and external doorframes (with or without fixed parts), including those relating to appearance, biological durability and other physical characteristics.
This European Standard applies to assembled windows, external door leaves and external doorframes uncoated or intended to be coated.
If windows or doors are covered by other decorative veneers or films their respective veneer of film Product Standard shall apply.
NOTE For example: Timber veneers may be graded to EN 635: Parts 1, 2, 3 and 5, and ENV 635 4.
Holz und Holzwerkstoffe in Außenfenstern, Außentüren und Außentürzargen - Anforderungen und Spezifikationen
Diese Europäische Norm legt grundlegende Anforderungen an Holz und Holzprodukte in Außenfenstern, Außentü-ren
und Außentürzargen (mit und ohne befestigte Teile) einschließlich solcher hinsichtlich des Aussehens, der me-chanischen
Eigenschaften und der Dauerhaftigkeit fest.
Diese Europäische Norm gilt für vorgefertigte Fenster, Außentüren und Außentürzargen, die unbeschichtet sind
oder für eine Beschichtung vorgesehen sind.
Wenn Fenster oder Türen mit anderen dekorativen Furnieren oder Filmen beschichtet sind, gelten die entspre-chenden
Produktnormen für Furniere oder Filme.
ANMERKUNG Furniere können z. B. nach EN 635, Teile 1, 2, 3 und 5 sowie ENV 635-4 beurteilt werden.
Bois et matériaux à base de bois dans les fenêtres extérieures, les vantaux de portes extérieures et les dormants de portes extérieures - Exigences et spécifications
La présente norme européenne fixe les exigences de base du bois et des produits à base de bois entrant
dans la composition des fenêtres extérieures, des vantaux et des dormants de portes extérieures (avec ou
sans parties fixes), y compris celles relatives à l’aspect, à la durabilité biologique et autres caractéristiques
physiques.
La présente norme européenne s’applique aux fenêtres assemblées, aux vantaux et dormants de portes
extérieures non revêtus ou appelés à être revêtus.
Si les fenêtres ou les portes sont couvertes par d’autres placages décoratifs ou films, les normes de placages
ou films en question doivent s’appliquer.
NOTE Par exemple : les placages en bois peuvent être classés selon EN 635 : parties 1, 2, 3 et 5 et ENV 635-4.
Les in lesni materiali za zunanja okna, zunanja vrata in zunanje okvirje vrat - Zahteve in specifikacije
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Timber and wood-based materials in external windows, external door leaves and external doorframes - Requirements and specificationsLes in lesni materiali za zunanja okna, zunanja vrata in zunanje okvirje vrat - Zahteve in specifikacijeBois et matériaux a base de bois dans les fenetres extérieures, les vantaux de portes extérieures et les dormants de portes extérieures - Exigences et spécificationsHolz und Holzwerkstoffe in Außenfenstern, Außentüren und Außentürzargen - Anforderungen und SpezifikationenTa slovenski standard je istoveten z:EN 14220:2006SIST EN 14220:2007en91.060.50Vrata in oknaDoors and windows79.060.01Wood-based panels in generalICS:SLOVENSKI
STANDARDSIST EN 14220:200701-marec-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14220November 2006ICS 79.060.01; 91.060.50 English VersionTimber and wood-based materials in external windows, externaldoor leaves and external doorframes - Requirements andspecificationsBois et matériaux à base de bois dans les fenêtresextérieures, les vantaux de portes extérieures et lesdormants de portes extérieures - Exigences etspécificationsHolz und Holzwerkstoffe in Außenfenstern, Außentüren undAußentürzargen - Anforderungen und SpezifikationenThis European Standard was approved by CEN on 11 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14220:2006: E
Quality recommendations for elements in external windows, external door leaves and external doorframes.12 Annex B (informative)
Classification of the face of a window/door.22 Bibliography.26
The Standards included in the Package are:
Standard Number Title 1 prEN 942 Revised Timber in joinery - General requirements 2 EN 13307-1 Timber blanks and semi-finished profiles for non-structural uses – Part 1: Requirements 3 EN 14220 Timber and wood-based materials in external windows, external door leaves and external doorframes – Requirements and specifications 4 EN 14221 Timber and wood-based materials in internal windows, internal door leaves and internal doorframes – Requirements and specifications
Explanation Standards 3 and 4 rely on both Standards 1 and 2, and Standard 2 relies on 1. The revised prEN 942 contains changes which directly affect Standards 2, 3 and 4 and therefore shall be available before they can be used effectively. NOTE
Following the completion of the Technical Enquiry for prEN 13307-2 Timber blanks and semi-finished profiles for non-structural uses – Part 2: Production control, it has been agreed to remove this Standard form the package.
As a result of the necessary changes it has been agreed to offer prEN 13307-2 as a CEN/TS. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
This standard contains the principle material requirements of timber in wood-based products, the processing of this timber and the components in the final products.
Requirements for mechanical aspects are indirectly considered by appearance and density selection. Characteristics and principles are listed in Table 1 and clauses 5, 6, 7, 8 and 9. Specific national requirements are given in Annex A. This standard contains two annexes, Annex A "National requirements" and Annex B "Weather exposed faces". Tables A.1 and A.2 of Annex A provide default tables for circumstances where a National Annex is not available. This standard is part of a series of standards on timber in windows, doors and stairs.
EN 13183-2, Moisture content of a piece of sawn timber – Part 2: Estimation by electrical resistance method EN 13183-3, Moisture content of a piece of sawn timber – Part 3: Estimation by capacitance method EN 13986, Wood-based panels for use in construction – Characteristics, evaluation of conformity and marking EN 14298, Sawn timber – Assessment of drying quality
3.2 concealed face face of a joinery part which, after installation of the joinery is completed, is permanently concealed by other parts of the joinery product, or by other parts or other elements, including materials such as veneer, plastic or metal NOTE These faces may be visible before the product is installed. 3.3 semi-concealed face visible face of a joinery part, which cannot be viewed when the window or door is in the closed position 3.4 visible face face of a joinery part which, after installation of the joinery is completed, is not permanently concealed or semi-concealed NOTE 1 An opaque coating system, does not constitute concealment. NOTE 2 Faces which are visible only when moving parts (e.g. window casements or door leaves) are open are classified as semi-concealed. 3.5 weather exposed face face of a joinery part, which is directly subjected to driving rain or running water or permanent or intermittent condensation NOTE For examples see Annex B. 3.6 appearance class any surface in joinery classified according to shakes, resin pockets, bark pockets, discoloration, sapwood, exposed pith, ambrosia beetle damage and knots
3.7 coating system combination of coating materials, which are to be applied or have been applied to the face of a joinery part
For products where the ultimate location is not known at the time of manufacture, sufficient information shall be provided to enable possible limitations for the product end use to be identified. 5 Appearance 5.1 Characteristics
The characteristics of the profiles that are applicable to the finished product are measured and classified in accordance with the requirements of prEN 942. 5.2 Appearance classes 5.2.1 General Table 1 identifies the elements for which characteristics shall be assigned and is a template t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.