EN ISO 6383-2:2004

Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983)

Applies to the following types of reactors: shunt reactors; series reactors including current-limiting reactors, neutral-earthing reactors, power flow control reactors, motor starting reactors, arc-furnace series reactors; filter (tuning) reactors; capacitor damping reactors; capacitor discharge reactors; earthing transformers (neutral couplers); arc-suppression reactors; smoothing reactors for HVDC and industrial application.

Kunststoffe - Folien und Bahnen - Bestimmung der Reißfestigkeit - Teil 2: Elmendorf-Verfahren (ISO 6383-2:1983)

Plastiques - Film et feuille - Détermination de la résistance au déchirement - Partie 2: Méthode Elmendorf (ISO 6383-2:1983)

1.1 La présente Norme internationale spécifie une méthode de détermination de la force nécessaire pour propager un déchirement sur une distance définie, à partir d'une fente définie, pratiquée sur une éprouvette d'une feuille flexible ou d'un film, dans des conditions définies de mise en charge. L'épaisseur maximale qui peut être soumise à l'essai est fonction du niveau de la force de déchirement du matériau par rapport aux performances de la machine d'essai. Les feuilles et films à base de polychlorure de vinyle (PVC) flexible et de polyoléfine font partie des matériaux qui peuvent être soumis à l'essai selon cette méthode, mais, pour les films les plus extensibles, l'effet de l'allongement variable et du déchirement oblique peut entraîner une mauvaise reproductibilité des résultats. La méthode peut ne pas être appropriée pour essayer les matériaux plus rigides, par exemple les films de PVC rigide, polyamides et polyestériques. 1.2 L'essai de résistance au déchirement spéc

Polimerni materiali - Filmi in folije - Ugotavljanje odpornosti proti trganju - 2. del: Elmendorfova metoda (ISO 6383-1:1983)

General Information

• Status: Published
• Publication Date: 20-Jul-2004
• Withdrawal Date: 30-Jan-2005
• ICS: 83.140.10 - Films and sheets
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Jul-2004
• Completion Date: 21-Jul-2004
• Ref Project: SIST EN ISO 6383-2:2004 - Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 6383-2:2004
01-oktober-2004
Polimerni materiali - Filmi in folije - Ugotavljanje odpornosti proti trganju - 2. del:
Elmendorfova metoda (ISO 6383-1:1983)
Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf
method (ISO 6383-2:1983)
Kunststoffe - Folien und Bahnen - Bestimmung der Reißfestigkeit - Teil 2: Elmendorf-
Verfahren (ISO 6383-2:1983)
Plastiques - Film et feuille - Détermination de la résistance au déchirement - Partie 2:
Méthode Elmendorf (ISO 6383-2:1983)
Ta slovenski standard je istoveten z: EN ISO 6383-2:2004
ICS:
83.140.10 Filmi in folije Films and sheets
SIST EN ISO 6383-2:2004 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 6383-2:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 6383-2:2004
EUROPEAN STANDARD
EN ISO 6383-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS 83.140.10
English version
Plastics - Film and sheeting - Determination of tear resistance -
Part 2: Elmendorf method (ISO 6383-2:1983)
Plastiques - Film et feuille - Détermination de la résistance Kunststoffe - Folien und Bahnen - Bestimmung der
au déchirement - Partie 2: Méthode Elmendorf (ISO 6383- Reißfestigkeit - Teil 2: Elmendorf-Verfahren (ISO 6383-
2:1983) 2:1983)
This European Standard was approved by CEN on 21 June 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6383-2:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 6383-2:2004
EN ISO 6383-2:2004 (E)






Foreword



The text of ISO 6383-2:1983 has been prepared by Technical Committee ISO/TC 61 "Plastics”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO
6383-2:2004 by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by
IBN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2005, and conflicting national
standards shall be withdrawn at the latest by January 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Endorsement notice

The text of ISO 6383-2:1983 has been approved by CEN as EN ISO 6383-2:2004 without any
modifications.

NOTE Normative references to International Standards are listed in Annex ZA (normative).

2

---------------------- Page: 4 ----------------------

SIST EN ISO 6383-2:2004


EN ISO 6383-2:2004 (E)



Annex ZA
(normative)

Normative references to international publications
with their relevant European publications


This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).

NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.


Publication Year Title E
...