prEN 16005

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

This document specifies requirements regarding design and test methods for power operated pedestrian doorsets. Examples of how the doorset constructions may be operated include: electro-mechanically, electro-hydraulically, electro-magnetically or pneumatically.
This document covers safety in use of power operated pedestrian doorsets used for normal access as well as in emergency and escape routes and as fire resistance and/or smoke control doorsets.
The type of doorsets covered include power operated pedestrian sliding, swing and revolving doorsets, including balanced doorsets and folding doorsets with a horizontally moving door leaf.
This document deals with all significant hazards, hazardous situations and events relevant to power operated doorsets when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
All lifetime phases of the power operated pedestrian doorsets including transportation, assembly, dismantling, disabling and scrapping are considered by this document.
This document does not apply to:
-   vertically moving doors;
-   doors on lifts;
-   doors on vehicles;
-   power operated doors or gates mainly intended for vehicular traffic or access for goods;
-   doors used in industrial processes;
-   partition walls;
-   doors outside the reach of people (such as crane gantry fences);
-   turnstiles;
-   platform doors;
-   traffic barriers.
This document does not cover special functions of doorsets, such as security in banks, airports, etc. or fire and/or smoke compartmentation, where conformity of the specific function with requirements of the application shall have the preference.
This document does not deal with any specific requirements on noise emitted from power operated pedestrian doorsets as their noise emission is not considered to be a relevant hazard.
NOTE   Noise emission of power operated pedestrian doorsets is not a significant hazard for the users of these products. It is a comfort aspect.
This document is not applicable to power operated pedestrian doorsets manufactured before the date of its publication.
This document does not cover operation in environments where there is a risk of explosion.

Kraftbetätigte Türen - Nutzungssicherheit - Anforderungen und Prüfverfahren

Das vorliegende Dokument legt Anforderungen an die Gestaltung von sowie Prüfverfahren für kraftbetätigte Innen  und Außentüren fest. Derartige Türkonstruktionen können elektromechanisch, elektrohydraulisch oder pneumatisch betrieben sein.
Dieses Dokument deckt die Nutzungssicherheit an kraftbetätigten Türen ab, die für den üblichen Zugang sowie an Notausgängen oder in Fluchtwegen und als Feuer- und/oder Rauchschutztüren eingesetzt werden.
Die abgedeckten Türbauarten umfassen kraftbetätigte Schiebe-, Drehflügel- und Karusselltüren, einschließlich Drehschiebetüren und Falttüren mit einem horizontal bewegten Flügel.
Kraftbetätigte Schlupftüren, die in anderen Türen eingebaut sind und deren bestimmungsgemäße Verwendung darin besteht, Personen sicheren Zugang zu gewähren, werden durch den Anwendungsbereich dieses Dokuments abgedeckt.
Das vorliegende Dokument behandelt alle für kraftbetätigte Türen relevanten signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse für den Fall, dass die Türen bestimmungsgemäß sowie unter nach normalem Ermessen durch den Hersteller vorhersehbaren Fehlanwendungsbedingungen benutzt werden (siehe Anhang J).
Alle Nutzungsphasen der kraftbetätigten Türen, einschließlich Transport, Montage, Demontage, Deaktivierung und Verschrottung, werden in diesem Dokument berücksichtigt.
Dieses Dokument gilt nicht für:
-   vertikal bewegte Türen;
-   Aufzugstüren;
-   Fahrzeugtüren;
-   kraftbetätigte Türen oder Tore, die vorwiegend für den Fahrzeugverkehr oder den Zugang für Güter vorgesehen sind;
-   Türen für den Einsatz in industriellen Prozessen;
-   Trennwände;
-   Türen und Tore außerhalb der Reichweite von Personen (wie z. B. Schutzgitter für Portalkrane);
-   Drehkreuze;
-   Bahnsteigtüren.
Dieses Dokument behandelt keine spezifischen Funktionen von Türen, wie z. B. Sicherheit in Banken, auf Flughäfen usw. oder Türen für Brandabschnitte, bei denen die Übereinstimmung der spezifischen Funktion mit den anwendungsbezogenen Anforderungen Vorrang hat.
Dieses Dokument behandelt nicht die speziellen Anforderungen an die durch kraftbetätigte Türen abgegebenen Geräusche, da diese nicht als signifikante Gefährdung angesehen werden.
ANMERKUNG   Die von kraftbetätigten Türen abgegebenen Geräusche stellen keine signifikante Gefährdung für die Anwender dieser Produkte dar. Es geht hierbei um Komfort.
Das vorliegende Dokument ist nicht auf kraftbetätigte Türen anwendbar, die vor dem Datum der Veröffentlichung dieses Dokuments hergestellt wurden.
Dieses Dokument behandelt nicht den Betrieb in Umgebungen, in denen ein Explosionsrisiko besteht.

Blocs-portes motorisés pour piétons - Sécurité d'utilisation - Exigences et méthodes d'essai

Le présent document spécifie les exigences concernant la conception et les méthodes d’essai applicables aux blocs-portes motorisés pour piétons, extérieurs et intérieurs. Ces constructions de blocs-portes peuvent être actionnées de manière électromécanique, électrohydraulique ou pneumatique.
Le présent document couvre la sécurité d’utilisation des blocs-portes motorisés pour piétons utilisés pour un accès normal, ainsi que ceux utilisés comme issues de secours et d’évacuation et comme blocs portes coupe-feu et/ou pare-flamme.
Le type de blocs-portes couvert inclut les blocs-portes motorisés pour piétons coulissants, battants et tournants, y compris les blocs-portes éclipsables et les blocs-portes pliants, avec un tablier se déplaçant horizontalement.
Les portillons motorisés pour piétons incorporés dans d’autres blocs-portes et dont la principale utilisation prévue est de permettre un accès sûr aux personnes entrent dans le domaine d’application du présent document.
Le présent document traite de tous les phénomènes dangereux significatifs, situations et événements dangereux applicables aux blocs-portes motorisés pendant une utilisation normale et en cas de mauvais usage raisonnablement prévisible par le fabricant (voir Annexe J).
Toutes les phases de la durée de vie des blocs-portes motorisés pour piétons incluant le transport, l’assemblage, le démontage, la mise hors service et la mise au rebut, sont examinées dans le présent document.
Le présent document ne s’applique pas :
-   aux portes à déplacement vertical ;
-   aux portes d’ascenseurs ;
-   aux portes de véhicules ;
-   aux portes ou portails motorisés principalement destinés au trafic de véhicules ou à l’accès de marchandises ;
-   aux portes utilisées dans des processus industriels ;
-   aux cloisons ;
-   aux portes hors d’atteinte des personnes (telles que les barrières sur les portiques de grues) ;
-   aux tourniquets ;
-   aux portes palières de quai.
Le présent document ne couvre pas les fonctions spéciales des blocs-portes, telles que la sécurité dans les banques, aéroports, etc. ou des compartiments étanches au feu, pour lesquelles la conformité de la fonction spécifique aux exigences de l’application doit être prioritaire.
Le présent document ne traite pas des exigences spécifiques relatives au bruit émis par les blocs-portes motorisés pour piétons car leurs émissions de bruit ne sont pas considérées comme un phénomène dangereux pertinent.
NOTE   Les émissions de bruit des blocs-portes motorisés pour piétons ne sont pas un phénomène dangereux significatif pour les utilisateurs de ces produits. Elles sont liées au confort.
Le présent document n’est pas applicable aux blocs-portes motorisés pour piétons fabriqués avant sa date de publication.
Le présent document ne couvre pas l’exploitation dans des environnements dans lesquels il existe un risque d’explosion.

Avtomatska vrata za prehod ljudi - Varnost pri uporabi - Zahteve in preskusne metode

General Information

• Status: Not Published
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 9 - Powered Pedestian Doors (PPD)
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 04-Jan-2023
• Due Date: 06-May-2022
• Completion Date: 04-Jan-2023
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: oSIST prEN 16005:2021 - Power operated pedestrian doorsets - Safety in use - Requirements and test methods

Relations

• Revises: EN 16005:2012 - Power operated pedestrian doorsets - Safety in use - Requirements and test methods
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16005:2021
01-januar-2021
Avtomatska vrata za prehod ljudi - Varnost pri uporabi - Zahteve in preskusne
metode

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

Kraftbetätigte Türen - Nutzungssicherheit - Anforderungen und Prüfverfahren

Blocs-portes motorisés pour piétons - Sécurité d'utilisation - Exigences et méthodes

d'essai
Ta slovenski standard je istoveten z: prEN 16005
ICS:
91.060.50 Vrata in okna Doors and windows
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
oSIST prEN 16005:2021 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16005:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16005:2021
DRAFT
EUROPEAN STANDARD
prEN 16005
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 91.060.50 Will supersede EN 16005:2012
English Version
Power operated pedestrian doorsets - Safety in use -
Requirements and test methods

Blocs-portes motorisés pour piétons - Sécurité Kraftbetätigte Türen - Nutzungssicherheit -

d'utilisation - Exigences et méthodes d'essai Anforderungen und Prüfverfahren

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16005:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)
Contents Page

European foreword ...................................................................................................................................................... 5

Introduction .................................................................................................................................................................... 6

1 Scope .................................................................................................................................................................... 7

2 Normative references .................................................................................................................................... 8

3 Terms and definitions ................................................................................................................................... 9

4 List of significant hazards .......................................................................................................................... 12

4.1 General.............................................................................................................................................................. 12

4.2 Hazards caused by inadequate functional safety .............................................................................. 12

4.3 Hazards caused by source of energy and power controls .............................................................. 12

4.4 Hazards caused by materials and shape of the leaves ..................................................................... 12

4.4.1 Materials .......................................................................................................................................................... 12

4.4.2 Shape of leaves ............................................................................................................................................... 12

4.5 Hazards caused by uncontrolled movement of the leaves ............................................................. 13

4.6 Hazards caused by manual operation ................................................................................................... 13

4.7 Hazards caused by activation of the movement of the leaf............................................................ 13

4.8 Hazards which can cause crushing, impact, shearing and drawing-in ...................................... 13

4.9 Hazards related to peripheral speed of revolving doors................................................................ 13

4.10 Hazards related to lighting of swept area of revolving doors ....................................................... 13

4.11 Hazards related to entrapment in the passage area of revolving doors ................................... 13

4.12 Hazards related to the use of the door in escape routes and emergency exits ...................... 13

5 Safety requirements and/or protective/risk reduction measures ............................................ 14

5.1 General.............................................................................................................................................................. 14

5.2 Functional safety ........................................................................................................................................... 14

5.3 Source of energy and power controls .................................................................................................... 14

5.3.1 Emergency stop function for revolving doorsets .............................................................................. 15

5.4 Material and shape of leaves..................................................................................................................... 15

5.4.1 Materials .......................................................................................................................................................... 15

5.4.2 Shape of leaves ............................................................................................................................................... 15

5.5 Movement of the leaves .............................................................................................................................. 15

5.6 Manual operation .......................................................................................................................................... 16

5.7 Activation of the movement of the leaf ................................................................................................. 16

5.7.1 Automatic activation.................................................................................................................................... 16

5.7.2 Manual activation devices ......................................................................................................................... 17

5.7.3 Remote activation ......................................................................................................................................... 17

5.8 Crushing, impact, shearing and drawing-in ........................................................................................ 17

5.8.1 General.............................................................................................................................................................. 17

5.8.2 Guards ............................................................................................................................................................... 18

5.8.3 Barriers ............................................................................................................................................................ 18

5.8.4 Power operated sliding doorsets ............................................................................................................ 18

5.8.5 Power-operated swing doorsets ............................................................................................................. 20

5.8.6 Power operated balanced doorsets ....................................................................................................... 21

5.8.7 Power operated folding doorsets............................................................................................................ 21

5.8.8 Power operated revolving doorsets ....................................................................................................... 22

5.8.9 Low energy movement ................................................................................................................................ 24

---------------------- Page: 4 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)

5.8.10 Limitation of impact forces ....................................................................................................................... 24

5.8.11 Protective equipment ................................................................................................................................. 26

5.8.12 Safety distances ............................................................................................................................................. 26

5.9 Peripheral speed of revolving doorsets ............................................................................................... 27

5.10 Lighting of swept area of revolving doorsets ..................................................................................... 27

5.11 Entrapment in the passage area of revolving doorsets .................................................................. 27

5.12 Additional requirements for doorsets in escape routes and emergency exits ...................... 27

5.12.1 Operating mode selection .......................................................................................................................... 27

5.12.2 Power operated doorsets with break-out function .......................................................................... 27

5.12.3 Power operated sliding and folding doorsets without a break-out function ......................... 28

5.12.4 Power operated swing doorsets without a break-out function ................................................... 28

5.12.5 Power operated revolving doors ............................................................................................................ 28

5.13 Durability ........................................................................................................................................................ 29

6 Verification of the safety requirements and/or protective/risk reduction measures ....... 30

6.1 General ............................................................................................................................................................. 30

6.1.1 Impact force measuring equipment ....................................................................................................... 30

6.1.2 Field impact force measuring equipment ............................................................................................ 31

6.1.3 On site measurement of impact force ................................................................................................... 31

6.2 Functional safety ........................................................................................................................................... 31

6.3 Source of energy and power controls .................................................................................................... 31

6.3.1 Emergency stop function for revolving doorsets .............................................................................. 31

6.4 Material and shape of leaves .................................................................................................................... 31

6.4.1 Materials .......................................................................................................................................................... 31

6.4.2 Shape of leaves............................................................................................................................................... 31

6.5 Movement of the leaves .............................................................................................................................. 32

6.6 Manual operation ......................................................................................................................................... 32

6.7 Activation of the movement of the leaf ................................................................................................. 32

6.8 Crushing, impact, shearing and drawing-in ........................................................................................ 32

6.8.1 General ............................................................................................................................................................. 32

6.8.2 Guards ............................................................................................................................................................... 32

6.8.3 Barriers ............................................................................................................................................................ 32

6.8.4 Power operated sliding doorsets ............................................................................................................ 32

6.8.5 Power-operated swing doorsets ............................................................................................................. 32

6.8.6 Power operated balanced doorsets ....................................................................................................... 32

6.8.7 Power operated folding doorsets ........................................................................................................... 32

6.8.8 Power operated revolving doorsets ...................................................................................................... 32

6.8.9 Low energy movement ............................................................................................................................... 32

6.8.10 Limitation of impact forces ....................................................................................................................... 33

6.8.11 Protective equipment ................................................................................................................................. 33

6.8.12 Safety distances ............................................................................................................................................. 33

6.9 Peripheral speed of revolving doorsets ............................................................................................... 33

6.10 Lighting of swept area of revolving doorsets ..................................................................................... 33

6.11 Entrapment in the passage area of revolving doorsets .................................................................. 33

6.12 Doorsets in escape routes and emergency exits ............................................................................... 33

6.13 Durability test ................................................................................................................................................ 33

6.13.1 General ............................................................................................................................................................. 33

6.13.2 Testing under normal conditions ........................................................................................................... 34

6.13.3 Testing at extreme temperature ............................................................................................................. 34

6.13.4 Additional test for doorsets in escape routes and emergency exits with a break-out

facility ............................................................................................................................................................... 34

6.13.5 Additional test for doorsets in escape routes and emergency exits without a break-

out facility ........................................................................................................................................................ 34

---------------------- Page: 5 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)

7 Information for use ...................................................................................................................................... 34

7.1 General.............................................................................................................................................................. 34

7.2 Instruction handbook.................................................................................................................................. 34

7.3 Marking ............................................................................................................................................................ 35

Annex A (informative) Illustration of some essential terms for various types of doorsets .............. 37

Annex B (normative) Measuring points ............................................................................................................... 38

Annex C (normative) Tests for protective equipment .................................................................................... 41

Annex D (informative) Disabled person sign ..................................................................................................... 47

Annex E (informative) Emergency break-out sign ........................................................................................... 48

Annex F (normative) Low energy doorsets ........................................................................................................ 49

F.1 Speed settings for low energy power operated swing doorsets .................................................. 49

F.2 Speed settings for low energy power operated sliding doorsets ................................................ 50

Annex G (normative) Safeguarding of power operated swing doorsets .................................................. 52

Annex H (informative) Danger points at revolving doorsets ....................................................................... 54

Annex I (informative) Logbook ............................................................................................................................... 57

Annex J (informative) List of significant hazards ............................................................................................. 58

Annex ZA (informative) Relationship between this European standard and the Essential

Requirements of Directive 2006/42/EC aimed to be covered ..................................................... 65

Bibliography ................................................................................................................................................................. 67

---------------------- Page: 6 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)
European foreword

This document (prEN 16005:2020) has been prepared by Technical Committee CEN/TC 33 “Doors,

windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.

This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16005:2012.

This document has been prepared under a standardization request given to CEN by the European

Commission and the European Free Trade Association, and supports essential requirements of EU

Directive.

For relationship with EU Directive, see informative Annex ZA, which is an integral part of this

document.
---------------------- Page: 7 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)
Introduction
This document is a type C standard as stated in EN ISO 12100:2010.

This document is of relevance, in particular, for the following stakeholder groups representing the

market players with regard to machinery safety:
— machine manufacturers (small, medium and large enterprises);

— health and safety bodies (regulators, accident prevention organizations, market surveillance etc.).

Others can be affected by the level of machinery safety achieved with the means of the document by the

above-mentioned stakeholder groups:
— machine users/employers (small, medium and large enterprises);

— machine users/employees (e.g. trade unions, organizations for people with special needs);

— service providers, e.g. for maintenance (small, medium and large enterprises);
— consumers (in case of machinery intended for use by consumers).

The above-mentioned stakeholder groups have been given the possibility to participate at the drafting

process of this document.

The machinery concerned and the extent to which hazards, hazardous situations and hazardous events

are covered are indicated in the scope of this document.

When requirements of this type-C standard are different from those which are stated in type-A or type-

B standards, the requirements of this type C standard take precedence over the requirements of the

other standards for machines that have been designed and built according to the provisions of this type-

C standard.
---------------------- Page: 8 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)
1 Scope

This document specifies requirements regarding design and test methods for external and internal

power operated pedestrian doorsets. Such doorset constructions may be operated electro-

mechanically, electro-hydraulically or pneumatically.

This document covers safety in use of power operated pedestrian doorsets used for normal access as

well as in emergency and escape routes and as fire resistance and/or smoke control doorsets.

The type of doorsets covered include power operated pedestrian sliding, swing and revolving doorsets,

including balanced doorsets and folding doorsets with a horizontally moving leaf.

Power operated pass doorsets for which the main intended use is giving safe access for persons

incorporated in other doors are covered by the scope of this document.

This document deals with all significant hazards, hazardous situations and events relevant to power

operated doorsets when they are used as intended and under conditions of misuse which are

reasonably foreseeable by the manufacturer (see Annex J).

All lifetime phases of the power operated pedestrian doorsets including transportation, assembly,

dismantling, disabling and scrapping are considered by this document.
This document does not apply to:
— vertically moving doors;
— doors on lifts;
— doors on vehicles;

— power operated doors or gates mainly intended for vehicular traffic or access for goods;

— doors used in industrial processes;
— partition walls;
— doors outside the reach of people (such as crane gantry fences);
— turnstiles;
— platform doors.

This document does not cover special functions of doorsets, such as security in banks, airports, etc. or

fire compartments, where conformity of the specific function with requirements of the application shall

have the preference.

This document does not deal with any specific requirements on noise emitted from power operated

pedestrian doorsets as their noise emission is not considered to be a relevant hazard.

NOTE Noise emission of power operated pedestrian doorsets is not a significant hazard for the users of these

products. It is a comfort aspect.

This document is not applicable to power operated pedestrian doorsets manufactured before the date

of its publication.

This document does not cover operation in environments where there is a risk of explosion.

---------------------- Page: 9 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments) applies.

EN ISO 13854:2019, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body

(ISO 13854:2017)

EN ISO 13856-2:2013, Safety of machinery — Pressure-sensitive protective devices — Part 2: General

principles for design and testing of pressure-sensitive edges and pressure-sensitive bars (ISO 13856-

2:2013)

EN 12150-1:2015+A1:2019, Glass in building — Thermally toughened soda lime silicate safety glass —

Part 1: Definition and description

EN 12433-1:1999, Industrial, commercial and garage doors and gates — Terminology — Part 1: Types of

doors

EN 12433-2:1999, Industrial, commercial and garage doors and gates — Terminology — Part 2: Parts of

doors
EN 12519:2018, Windows and pedestrian doors — Terminology

EN 12978:2003+A1:2009, Industrial, commercial and garage doors and gates — Safety devices for power

operated doors and gates — Requirements and test methods

EN 14351-1:2006+A2:2016, Windows and doors — Product standard, performance characteristics —

Part 1: Windows and external pedestrian doorsets

EN 60335-2-103:2015, Household and similar electrical appliances — Safety — Part 2-103: Particular

requirements for drives for gates, doors and windows
Degrees of protection provided by enclosures (IP Code) (IEC 60529:1989)
EN 60529:1991,

EN 60664-1:2007, Insulation coordination for equipment within low-voltage systems — Part 1: Principles,

requirements and tests (IEC 60664-1:2007)

EN ISO 4413:2010, Hydraulic fluid power — General rules and safety requirements for systems and their

components (ISO 4413:2010)

EN ISO 4414:2010, Pneumatic fluid power — General rules and safety requirements for systems and their

components (ISO 4414:2010)

EN ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk

reduction (ISO 12100:2010)

EN ISO 12543-1:2011, Glass in building — Laminated glass and laminated safety glass — Part 1:

Definitions and description of component parts (ISO 12543-1:2011)

EN ISO 12543-2:2011, Glass in building — Laminated glass and laminated safety glass — Part 2:

Laminated safety glass (ISO 12543-2:2011)
As impacted by EN 60529:1991/A1:2000 and EN 60529:1991/A2:2013.
---------------------- Page: 10 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)

EN ISO 13849-1:2015, Safety of machinery — Safety-related parts of control systems — Part 1: General

principles for design (ISO 13849-1:2015)

EN ISO 13850:2015, Safety of machinery — Emergency stop function — Principles for design

(ISO 13850:2015)

EN ISO 13856-2:2013, Safety of machinery — Pressure-sensitive protective devices — Part 2: General

principles for the design and testing of pressure-sensitive edges and pressure-sensitive bars

(ISO 13856-2:2013)
3 Terms and definitions

For the purposes of this document, the terms and definitions given in EN ISO 12100:2010,

EN 12433-1:1999, EN 12433-2:1999, EN 12519:2018 and EN 14351-1:2006+A2:2016 and the following

apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at https://www.iso.org/obp
3.1
power operated pedestrian doorset

doorset for pedestrian passage only with one or more leaves that is moved, at least in one direction, by

an external energy supply (e.g. electrically) instead of manual or stored mechanical energy

Note 1 to entry: It includes drive, leaves, protective equipment and any components needed for its safe operation.

3.2
revolving doorset

power operated pedestrian doorset with one or more leaves connected to a common vertical axis of

rotation within an enclosure

Note 1 to entry: There is a wide range of design variations in this product group. See Figure 1 for examples.

Note 2 to entry: Figure 1 refers to any rotation. The shown anticlockwise rotation is only the more common one.

---------------------- Page: 11 ----------------------
oSIST prEN 16005:2021
prEN 16005:2020 (E)
a) b) c)
d) e) f)
g) h) i) j)
Figure 1 — Revolving doorsets
3.3
balanced doorset
power operated pedestrian doorset with a pivot point allowing the leaf/
...