iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 29464

(Main)

Cleaning of air and other gases - Terminology (ISO/DIS 29464:2023)

Cleaning of air and other gases - Terminology (ISO/DIS 29464:2023)

ISO 29464:2017 establishes a terminology for the air filtration industry and comprises terms and definitions only.
ISO 29464:2017 is applicable to particulate and gas phase air filters and air cleaners used for the general ventilation of inhabited enclosed spaces. It is also applicable to air inlet filters for static or seaborne rotary machines and UV-C germicidal devices.
It is not applicable to cabin filters for road vehicles or air inlet filters for mobile internal combustion engines for which separate arrangements exist. Dust separators for the purpose of air pollution control are also excluded.

Reinigung von Luft und anderen Gasen - Terminologie (ISO/DIS 29464:2023)

Dieses Dokument legt die Terminologie für die Luftfilterindustrie fest und enthält lediglich Begriffe und Definitionen.
Dieses Dokument gilt für Partikel- und Gasphasen-Luftfilter sowie Luftreiniger für die allgemeine Belüftung bewohnter umschlossener Räume. Darüber hinaus gilt das Dokument für Luftansaugfilter von stationären oder im Offshore-Bereich installierten Turbinen und Verdichtern sowie UV-C-Entkeimungseinrichtungen.
Das Dokument gilt nicht für Kabinenfilter für Straßenfahrzeuge oder Lufteinlassfilter für mobile Innenraum-Verbrennungsmotoren, für die separate Vorschriften bestehen. Staubabscheider zur Minderung der Luftverschmutzung sind ebenfalls ausgeschlossen.

Épuration de l'air et autres gaz - Terminologie (ISO/DIS 29464:2023)

ISO 29464:2017 établit une terminologie destinée aux industries de la filtration de l'air et comprend uniquement des termes et des définitions.
ISO 29464:2017 s'applique aux épurateurs et filtres d'air pour particules et phases gazeuses utilisés pour la ventilation générale des espaces clos habités. Elle s'applique également aux filtres d'admission d'air destinés aux machines rotatives statiques ou maritimes, ainsi qu'aux dispositifs germicides UV-C.
Elle ne s'applique ni aux filtres de cabine de véhicules routiers, ni aux filtres d'admission d'air de moteurs mobiles à combustion interne qui font l'objet de dispositions différentes. Les séparateurs de poussière employés pour le contrôle de la pollution de l'air sont également exclus.

Čiščenje zraka in drugih plinov - Terminologija (ISO/DIS 29464:2023)

General Information

Status
Not Published
Publication Date
24-Nov-2024
ICS
01.040.91 - Construction materials and building (Vocabularies)
91.140.30 - Ventilation and air-conditioning systems
Technical Committee
CEN/TC 195 - Air filters for general air cleaning
Drafting Committee
CEN/TC 195 - Air filters for general air cleaning
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
15-Jan-2024
Completion Date
15-Jan-2024
Ref Project
oSIST prEN ISO 29464:2023 - Cleaning of air and other gases - Terminology (ISO/DIS 29464:2023)

Relations

Revises
EN ISO 29464:2019 - Cleaning of air and other gases - Terminology (ISO 29464:2017)
Effective Date
19-Jan-2023

Buy Standard

prEN ISO 29464:2023prEN ISO 29464:2023
PreviousNext
Draft
prEN ISO 29464:2023
English language
49 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 29464:2023
01-julij-2023
Čiščenje zraka in drugih plinov - Terminologija (ISO/DIS 29464:2023)
Cleaning of air and other gases - Terminology (ISO/DIS 29464:2023)
Reinigung von Luft und anderen Gasen - Terminologie (ISO/DIS 29464:2023)
Épuration de l'air et autres gaz - Terminologie (ISO/DIS 29464:2023)
Ta slovenski standard je istoveten z: prEN ISO 29464
ICS:
01.040.13 Okolje. Varovanje zdravja. Environment. Health
Varnost (Slovarji) protection. Safety
(Vocabularies)
13.040.99 Drugi standardi v zvezi s Other standards related to air
kakovostjo zraka quality
23.120 Zračniki. Vetrniki. Klimatske Ventilators. Fans. Air-
naprave conditioners
oSIST prEN ISO 29464:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 29464:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 29464:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 29464
ISO/TC 142 Secretariat: UNI
Voting begins on: Voting terminates on:
2023-04-27 2023-07-20
Cleaning of air and other gases — Terminology
Épuration de l'air et autres ga — Terminologie
ICS: 91.140.30; 01.040.91
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 29464:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 29464:2023
ISO/DIS 29464:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 29464
ISO/TC 142 Secretariat: UNI
Voting begins on: Voting terminates on:

Cleaning of air and other gases — Terminology
Épuration de l'air et autres ga — Terminologie
ICS: 91.140.30; 01.040.91
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 29464:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 29464:2023
ISO/DIS 29464:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General, applicable to both particle and gas-phase air cleaners .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 29464:2019(Main)
Cleaning of air and other gases - Terminology (ISO 29464:2017)
SIST EN ISO 29464:2019

ISO 29464:2017 establishes a terminology for the air filtration industry and comprises terms and definitions only.
ISO 29464:2017 is applicable to particulate and gas phase air filters and air cleaners used for the general ventilation of inhabited enclosed spaces. It is also applicable to air inlet filters for static or seaborne rotary machines and UV-C germicidal devices.
It is not applicable to cabin filters for road vehicles or air inlet filters for mobile internal combustion engines for which separate arrangements exist. Dust separators for the purpose of air pollution control are also excluded.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12309-1:2023(Main)
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
SIST EN 12309-1:2023

1.1   Scope of EN 12309
Appliances covered by this document include one or a combination of the following:
-   gas-fired sorption chiller;
-   gas-fired sorption chiller/heater;
-   gas-fired sorption heat pump;
-   hybrids based on gas sorption appliances.
This document applies to appliances designed to be used for space heating or cooling or refrigeration with or without heat recovery.
This document applies to appliances having flue gas systems of type B and C (according to EN 1749) and to appliances designed for outdoor installations. EN 12309 does not apply to air conditioners, it only applies to appliances having:
-   integral burners under the control of fully automatic burner control systems,
-   closed system refrigerant circuits in which the refrigerant does not come into direct contact with the water or air to be cooled or heated,
-   mechanical means to assist transportation of the combustion air and/or the flue gas.
The above appliances can have one or more primary or secondary functions (i.e. heat recovery).
In the case of packaged units (consisting of several parts), this standard applies only to those designed and supplied as a complete package.
The appliances having their condenser cooled by air and by the evaporation of external additional water are not covered by EN 12309.
Installations used for heating and/or cooling of industrial processes are not within the scope of EN 12309.
All the symbols given in this text are used regardless of the language used.
1.2   Scope of this Part 1 of EN 12309
This part of this document specifies the terms and definitions for gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14511-1:2022(Main)
Air conditioners, liquid chilling packages and heat pumps for space heating and cooling and process chillers, with electrically driven compressors - Part 1: Terms and definitions
SIST EN 14511-1:2022

This document specifies the terms and definitions for the rating and performance of air conditioners, liquid chilling packages and heat pumps using either air, water or brine as heat transfer media, with electrically driven compressors when used for space heating and/or cooling.
It also specifies the terms and definitions for the rating and performance of process chillers.
This document does not apply to heat pumps for domestic hot water, although certain definitions can be applied to these.
This document applies to:
-   factory-made units that can be ducted,
-   factory-made liquid chilling packages with integral condensers or for use with remote condensers, and
-   air-to-air air conditioners which can also evaporate the condensate on the condenser side.
Packaged units, single split and multisplit systems are covered by this document. Single duct and double duct units are covered by this document, as well.
In the case of units consisting of several parts, this document applies only to those designed and supplied as a complete package, except for liquid chilling packages with remote condenser.
This document is primarily intended for water and brine chilling packages but can be used for other liquid subject to agreement.
The units having their condenser cooled by air and by the evaporation of external additional water will have their performance in the cooling mode determined in accordance to EN 15218. For those which can also operate in the heating mode, the EN 14511 series applies for the determination of their performance in the heating mode.
NOTE 1   Part load testing of units is dealt with in EN 14825.
NOTE 2   All the symbols given in this text are used regardless of the language.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 29464:2019(Main)
Cleaning of air and other gases - Terminology (ISO 29464:2017)
SIST EN ISO 29464:2019

ISO 29464:2017 establishes a terminology for the air filtration industry and comprises terms and definitions only.
ISO 29464:2017 is applicable to particulate and gas phase air filters and air cleaners used for the general ventilation of inhabited enclosed spaces. It is also applicable to air inlet filters for static or seaborne rotary machines and UV-C germicidal devices.
It is not applicable to cabin filters for road vehicles or air inlet filters for mobile internal combustion engines for which separate arrangements exist. Dust separators for the purpose of air pollution control are also excluded.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14037-1:2016(Main)
Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements
SIST EN 14037-1:2017

This European Standard defines technical specifications and requirements of free hanging prefabricated ceil-ing mounted radiant panels with an air gap between construction and the emitter (not embedded) fed with water at temperatures below 120 °C connected with a centralized heating supply source intended to be in-stalled in buildings.
The panels should be installed with an upper insulation.
The European Standard does not apply to independent heating devices.
The European Standard also defines the additional common data that the manufacturer has to provide to the trade in order to ensure the correct application of the products.
This European standard does not cover the performance of hanging accessories.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12792:2003(Main)
Ventilation for buildings - Symbols, terminology and graphical symbols
SIST EN 12792:2004

This European Standard specifies symbols, units and terminology ventilation systems for buildings.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    77 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4259-5:2024(Main)
Petroleum and related products - Precision of measurement methods and results - Part 5: Statistical assessment of agreement between two different measurement methods that claim to measure the same property (ISO 4259-5:2023)
kSIST FprEN ISO 4259-5:2023

This document specifies statistical methodology for assessing the expected agreement between two test methods that purport to measure the same property of a material, and for deciding if a simple linear bias correction can further improve the expected agreement.
This document is applicable for analytical methods which measure quantitative properties of petroleum or petroleum products resulting from a multi-sample-multi-lab study (MSMLS). These types of studies include but are not limited to interlaboratory studies (ILS) meeting the requirements of ISO 4259-1 or equivalent, and proficiency testing programmes (PTP) meeting the requirements of ISO 4259-3 or equivalent.
The methodology specified in this document establishes the limiting value for the difference between two results where each result is obtained by a different operator using different apparatus and two methods X and Y, respectively, on identical material. One of the methods (X or Y) has been appropriately bias-corrected to agree with the other in accordance with this practice. This limit is designated as the between-methods reproducibility. This value is expected to be exceeded with a probability of 5 % under the correct and normal operation of both test methods due to random variation.
NOTE      Further conditions for application of this methodology are given in 5.1 and 5.2.

  • Draft
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52945:2024(Main)
Additive manufacturing for automotive - Qualification principles - Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes (ISO/ASTM 52945:2023)
SIST EN ISO/ASTM 52945:2024

This document specifies the methodology for generic AM-machine evaluation in automotive environment using objective test criteria and provides the framework for an objective AM-machine evaluation and comparison. This document finds application in benchmarks, in the preparation of purchase decisions, but also in AM-machine evaluation within the machine procurement, acceptance, and qualification processes. This document is specific to automotive, as it is related to existing series part requirements of various original equipment manufacturers, but the content can be transferred to other industries if necessary.
Furthermore, this document specifies machine KPIs in the context of machine procurement, production planning and production of PBF-LB/M components. It aims to reach a detailed understanding between machine supplier and machine user with respect to the acceptance criteria during the procurement process and evaluation of machine performance during running production. For using this document, all process parameters, such as scanning speed, laser power, etc., are fixed, since changing these parameters can affect the entire process performance and its stability. Therefore, variables are not changed any more during or after qualification. This document and the determination of the KPIs help in the evaluation of machine properties, but do not replace an application-specific approval process.
This document is applicable to the additive manufacturing technology PBF-LB/M.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 3311:2023(Main)
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D ≤ 300 mm - 900 MPa ≤ Rm ≤ 1 160 MPa
SIST EN 3311:2024

This document specifies the requirements relating to:
Titanium alloy TI-P64001 (Ti-6Al-4V)
Annealed
Bars for machining
D < 300 mm
900 MPa ≤ Rm ≤ 1 160 MPa
for aerospace applications

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13329:2023(Main)
Laminate floor coverings - Specifications, requirements and test methods
SIST EN 13329:2024

This document specifies characteristics, requirements and test methods for laminate floor coverings with a surface layer as defined in 3.2 to 3.5. It also specifies requirements for marking and packaging.
It includes a classification system, based on EN ISO 10874, giving practical requirements for areas of use and levels of use, to indicate where laminate floor coverings will give satisfactory service and to encourage the consumer to make an informed choice.
Laminate floor coverings are generally designed for floating installations and are considered for domestic and commercial levels of use, including domestic kitchens. This document does not specify requirements relating to the use in areas which are subjected to frequent wetting, such as bathrooms, laundry rooms or saunas. In general, laminate floor coverings can only be used in those areas when authorized by the manufacturer and under conditions described in the manufacturer's installation guidelines.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day