CEN/TS 16165:2012

Determination of slip resistance of pedestrian surfaces - Methods of evaluation

This Technical Specification specifies test methods for the determination of the slip resistance of surfaces in the most commonly encountered situations in which pedestrians walk.
This Technical Specification does not cover sports surfaces and road surfaces for vehicles (skid resistance).

Bestimmung der Rutschhemmumg von Fußböden - Ermittlungsverfahren

Diese Technische Spezifikation legt Prüfverfahren zur Bestimmung des Gleitwiderstands von Oberflächen für die am häufigsten auftretenden Situationen, in denen Fußgänger gehen, fest. In dieser Technischen Spezifikation werden keine Sportflächen und Straßenoberflächen für Fahrzeuge behandelt (Rutschwiderstand).

Détermination de la résistance à la glissance des surfaces piétonnières - Méthodes d'évaluation

La présente Spécification technique spécifie les méthodes d'essai pour la détermination de la résistance à la
glissance des surfaces sur lesquelles des piétons marchent dans les situations les plus courantes.
La présente Spécification technique ne couvre pas les surfaces destinées à un usage sportif ni les
revêtements de route pour véhicules (résistance au dérapage).

Ugotavljanje odpornosti talnih površin proti zdrsu - Metoda ocenjevanja

General Information

• Status: Withdrawn
• Publication Date: 17-Apr-2012
• Withdrawal Date: 30-Aug-2016
• ICS: 17.040.20 - Properties of surfaces
• ICS: 93.080.10 - Road construction
• Technical Committee: CEN/TC 339 - Slip resistance of pedestrian surfaces - Methods of evaluation
• Drafting Committee: CEN/TC 339/WG 1 - Determination of the parameters of slip
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 31-Aug-2016
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
• Ref Project: SIST-TS CEN/TS 16165:2014 - Determination of slip resistance of pedestrian surfaces - Methods of evaluation

Relations

• Replaced By: CEN/TS 16165:2016 - Determination of slip resistance of pedestrian surfaces - Methods of evaluation
• Effective Date: 16-Nov-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16165:2014
01-marec-2014
Ugotavljanje odpornosti talnih površin proti zdrsu - Metoda ocenjevanja
Determination of slip resistance of pedestrian surfaces - Methods of evaluation
Bestimmung der Rutschhemmung von Fußböden - Ermittlungsverfahren
Détermination de la résistance à la glissance des surfaces piétonnières - Méthodes
d'évaluation
Ta slovenski standard je istoveten z: CEN/TS 16165:2012
ICS:
17.040.20 Lastnosti površin Properties of surfaces
93.080.10 Gradnja cest Road construction
SIST-TS CEN/TS 16165:2014 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN/TS 16165:2014

---------------------- Page: 2 ----------------------

SIST-TS CEN/TS 16165:2014


TECHNICAL SPECIFICATION
CEN/TS 16165

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
April 2012
ICS 17.040.20; 93.080.10
English Version
Determination of slip resistance of pedestrian surfaces -
Methods of evaluation
Détermination de la résistance à la glissance des surfaces Bestimmung der Rutschhemmumg von Fußböden -
piétonnières - Méthodes d'évaluation Ermittlungsverfahren
This Technical Specification (CEN/TS) was approved by CEN on 4 March 2012 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16165:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN/TS 16165:2014
CEN/TS 16165:2012 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Test methods .7
Annex A (normative) Barefoot Ramp Test .8
A.1 Principle .8
A.2 Test equipment .8
A.3 Verification . 10
A.4 Test procedure . 10
A.5 Evaluation . 11
A.6 Precision . 11
A.7 Test report .
...