Bitumen and bituminous binders - Determination of mixing stability with cement of bitumen emulsions

This European Standard specifies a method for the determination of mixing stability of bitumen emulsions with cement. It applies to overstabilized cationic bitumen emulsions and to slow-setting and overstabilized anionic bitumen emulsions.
WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Bitumen und bitumenhaltige Bindemittel - Bestimmung der Mischstabilität von Bitumenemulsionen mit Zement

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Zementverträglichkeit von Bitumenemulsionen fest. Sie gilt für überstabilisierte kationische Bitumenemulsionen und sich langsam absetzende und überstabilisierte anionische Bitumenemulsionen.

Bitumes et liants bitumineux - Détermination de la stabilité des émulsions de bitume en mélange avec du ciment

Domaine d'application
La présente Norme européenne prescrit une méthode pour la détermination de la stabilité des émulsions de bitume en mélange avec du ciment. Elle s'applique aux émulsions anioniques lentes et surstabilisées et aux émulsions cationiques surstabilisées.
AVERTISSEMENT   L'utilisation de la présente Norme européenne implique l'intervention de produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n'a pas la prétention d'aborder tous les problèmes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de déterminer l'applicabilité des restrictions réglementaires avant l'utilisation.

Bitumen in bitumenska veziva - Določevanje stopnje stabilnosti bitumenskih emulzij s cementom

General Information

Status
Withdrawn
Publication Date
21-May-2002
Withdrawal Date
24-Mar-2009
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
25-Mar-2009
Completion Date
25-Mar-2009

Relations

Buy Standard

Standard
EN 12848:2003
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12848:2003
01-januar-2003
%LWXPHQLQELWXPHQVNDYH]LYD'RORþHYDQMHVWRSQMHVWDELOQRVWLELWXPHQVNLK
HPXO]LMVFHPHQWRP
Bitumen and bituminous binders - Determination of mixing stability with cement of
bitumen emulsions
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Mischstabilität von
Bitumenemulsionen mit Zement
Bitumes et liants bitumineux - Détermination de la stabilité des émulsions de bitume en
mélange avec du ciment
Ta slovenski standard je istoveten z: EN 12848:2002
ICS:
75.140 Voski, bitumni in drugi naftni Waxes, bituminous materials
proizvodi and other petroleum products
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 12848:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 12848
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2002
ICS 75.140; 91.100.50
English version
Bitumen and bituminous binders - Determination of mixing
stability with cement of bitumen emulsions
Bitumes et liants bitumineux - Détermination de la stabilité Bitumen und bitumenhaltige Bindemittel - Bestimmung der
des émulsions de bitume en mélange avec du ciment Mischstabilität von Bitumenemulsionen mit Zement
This European Standard was approved by CEN on 15 February 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12848:2002 E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 12848:2002 (E)
Foreword
This document EN 12848:2002 has been prepared by Technical Committee CEN/TC 336 "Bituminous binders", the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest
by November 2002.
This European Standard is part of a package including 14 standards: EN 1428, EN 1429, EN 1430, EN 1431,
EN 12846, EN 12847, EN 12848, EN 12849, EN 12850, EN 13074, EN 13075-1, EN 13075-2, EN 13614 and
EN 13808.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,
Sweden, Switzerland and the United Kingdom.
2

---------------------- Page: 3 ----------------------

EN 12848:2002 (E)
1 Scope
This European Standard specifies a method for the determination of mixing stability of bitumen emulsions with
cement. It applies to overstabilized cationic bitumen emulsions and to slow-setting and overstabilized anionic
bitumen emulsions.
WARNING – The use of this standard can involve hazardous materials, operations and equipment. This
standard does not purport to address all of the safety problems associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety and health practices and
determine the applicability of regulatory limitations prior to use.
2 Normative references
This European Standard incorporates, by dated or undated reference, provisions from other publications. The
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references, the latest edition of the
publication referred to applies (including amendments).
1)
EN 58 , Bitumen and bituminous binders - Sampling bituminous binders.
EN 12594, Bitumen and bituminous binders - Preparation of test samples.
EN 197-1, Cement - Part 1: Composition, specifications and conformity criteria for common cements.
EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.