EN 10263-3:2001

Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels

1.1   This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment.
1.2   This Part of EN 10263 is complemented by EN 10263-1.

Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 3: Technische Lieferbedingungen für Einsatzstähle

1.1 Dieser Teil von EN 10263 gilt für runden Walzdraht, runde Stäbe und Draht mit einem Durchmes-ser
bis einschließlich 100 mm aus unlegiertem und legiertem Stahl zum Kaltstauchen und Kaltfließ-pressen
und nachfolgendem Einsatzhärten.
1.2 Dieser Teil von EN 10263 wird ergänzt durch EN 10263-1.

Barres, fil machine et fil en acier pour transformation à froid et extrusion à froid - Partie 3: Conditions techniques de livraison des aciers de cémentation

1.1   La présente partie 3 de l'EN 10263 s'applique au fil machine de section ronde, aux barres ronde et au fil ayant un diamètre inférieur ou égal à 100 mm, en acier allié et non allié, destinés à des opérations de transformation à froid et d'extrusion à froid, suivies d'un traitement de cémentation.
1.2   La présente partie 3 de l'EN 10263 est complétée par l'EN 10263-1.

Valjana žica, palice in žica za hladno kovanje in hladno iztiskanje - 3. del: Tehnični dobavni pogoji za cementirna jekla

General Information

• Status: Withdrawn
• Publication Date: 19-Jun-2001
• Withdrawal Date: 31-Oct-2017
• ICS: 77.140.60 - Steel bars and rods
• ICS: 77.140.65 - Steel wire, wire ropes and link chains
• Technical Committee: ECISS/TC 106 - Wire rod and wires
• Drafting Committee: ECISS/TC 15 - Wire-rod - Qualities, dimensions, tolerances and specific tests
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 01-Nov-2017
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10263-3:2002 - Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels

Relations

• Replaced By: EN 10263-3:2017 - Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
• Effective Date: 08-Nov-2017
• Parent: EN 10263-1:2001 - Steel rod, bars and wire for cold heading and cold extrusion - Part 1: General technical delivery conditions
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 3: Technische Lieferbedingungen für EinsatzstähleBarres, fil machine et fil en acier pour transformation a froid et extrusion a froid - Partie 3: Conditions techniques de livraison des aciers de cémentationSteel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.60Jeklene palice in drogoviSteel bars and rodsICS:Ta slovenski standard je istoveten z:EN 10263-3:2001SIST EN 10263-3:2002en01-september-2002SIST EN 10263-3:2002SLOVENSKI
STANDARD



SIST EN 10263-3:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10263-3June 2001ICS 77.140.60; 77.140.65English versionSteel rod, bars and wire for cold heading and cold extrusion -Part 3: Technical delivery conditions for case hardening steelsBarres, fil machine et fil en acier pour transformation à froidet extrusion à froid - Partie 3: Conditions techniques delivraison des aciers de cémentationWalzdraht, Stäbe und Draht aus Kaltstauch- undKaltfließpreßstählen - Teil 3: Technische Lieferbedingungenfür EinsatzstähleThis European Standard was approved by CEN on 19 April 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10263-3:2001 ESIST EN 10263-3:2002



Page 2EN 10263-3:2001CONTENTSPageFOREWORD.31Scope.42Normative References.43Terms and definitions.44Classification and Designation.44.1Classification.44.2Designation.45Production process.45.1Steelmaking process.45.2Deoxidation.56Requirements.56.1Delivery conditions.56.2Chemical composition.56.3Mechanical properties.56.4Hardenability.56.5Surface quality.56.6Supplementary or special requirements.5SIST EN 10263-3:2002



Page 3EN 10263-3:2001FOREWORDThis European Standard has been prepared by Technical Committee ECISS/TC 15 "Wire-rod - Qualities,dimensions, tolerances and specific tests", the secretariat of which is held by UNI.This European Standard shall be given the status of a national standard, either by publication of anidentical text or by endors
...