EN ISO 877-2:2010

Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)

ISO 877-2:2009 specifies a method for the direct exposure of plastics to solar radiation and a method for the exposure of plastics to glass-filtered solar radiation (exposure behind window glass). The purpose is to assess property changes produced after specified stages of such exposures.

Kunststoffe - Freibewitterung - Teil 2: Bewitterung und Bestrahlen hinter Fensterglas (ISO 877-2:2009)

Dieser Teil von ISO 877 legt ein Verfahren für die direkte Beanspruchung von Kunststoffen durch die Sonnenstrahlung
(Verfahren A) und ein Verfahren für die Beanspruchung von Kunststoffen hinter Fensterglas
(Verfahren B) fest. Das Ziel ist es, die Eigenschaftsänderungen, die nach bestimmten Stufen derartiger Beanspruchungen
eintreten, zu beurteilen. Eine allgemeine Anleitung, die den Anwendungsbereich von ISO 877
betrifft, ist in ISO 877-1:2009, Abschnitt 1, angegeben.

Plastiques - Méthodes d'exposition au rayonnement solaire - Partie 2: Exposition directe et exposition derrière une vitre en verre (ISO 877-2:2009)

L'ISO 877-2:2009 spécifie une méthode d'exposition directe des plastiques au rayonnement solaire et une méthode d'exposition des plastiques au rayonnement solaire sous filtre de verre (exposition derrière une vitre en verre). L'objectif consiste à évaluer les changements de propriété produits après des phases d'exposition spécifiées.

Polimerni materiali - Metode izpostavitve vremenskim vplivom - 2. del: Vremenski vplivi z dnevno svetlobo, filtrirano skozi steklo (ISO 877-2:2009)

Ta del standarda ISO 877 določa metodo za neposredno izpostavitev polimernih materialov sončnemu sevanju (metoda A) in metodo za izpostavitev polimernih materialov sončnemu sevanju, ki jih filtrira steklo (izpostavitev za okenskim steklom) (metoda B). Namen je oceniti spremembe lastnosti, do katerih pride po določenih stopnjah take izpostavitve. Splošni napotki v zvezi s področjem uporabe standarda ISO 877 so podani v točki 1 standarda ISO 877-1:2009.

General Information

• Status: Published
• Publication Date: 21-Dec-2010
• Withdrawal Date: 29-Jun-2011
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Dec-2010
• Due Date: 28-Feb-2012
• Completion Date: 22-Dec-2010
• Ref Project: SIST EN ISO 877-2:2012 - Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009)

Relations

• Replaces: EN ISO 877:1996 - Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994)
• Effective Date: 08-Jun-2022
• Revised: prEN ISO 877-2 - Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO/DIS 877-2:2016)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 877-2:2012
01-marec-2012
1DGRPHãþD
SIST EN ISO 877:2000
Polimerni materiali - Metode izpostavitve vremenskim vplivom - 2. del: Vremenski
vplivi z dnevno svetlobo, filtrirano skozi steklo (ISO 877-2:2009)
Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and
exposure behind window glass (ISO 877-2:2009)
Kunststoffe - Freibewitterung - Teil 2: Bewitterung und Bestrahlen hinter Fensterglas
(ISO 877-2:2009)
Plastiques - Méthodes d'exposition au rayonnement solaire - Partie 2: Exposition directe
et exposition derrière une vitre en verre (ISO 877-2:2009)
Ta slovenski standard je istoveten z: EN ISO 877-2:2010
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 877-2:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 877-2:2012

---------------------- Page: 2 ----------------------

SIST EN ISO 877-2:2012


EUROPEAN STANDARD
EN ISO 877-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2010
ICS 83.080.01 Supersedes EN ISO 877:1996
English Version
Plastics - Methods of exposure to solar radiation - Part 2: Direct
weathering and exposure behind window glass (ISO 877-
2:2009)
Plastiques - Méthodes d'exposition au rayonnement solaire Kunststoffe - Freibewitterung - Teil 2: Bewitterung und
- Partie 2: Exposition directe et exposition derrière une vitre Bestrahlen hinter Fensterglas (ISO 877-2:2009)
en verre (ISO 877-2:2009)
This European Standard was approved by CEN on 4 December 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 877-2:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 877-2:2012
EN ISO 877-2:2010 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 877-2:2012
EN ISO 877-2:2010 (E)
Foreword
The text of ISO 877-2:2009 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 877-2:2010 by
Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2011, and conflicting national standards shall be withdrawn at
the latest by June 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 877:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 877-2:2009 has been approved by CEN as a EN ISO 877-2:2010 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 877-2:2012

---------------------- Page: 6 ----------------------

SIST EN ISO 877-2:2012

INTERNATIONAL ISO
STANDARD
...