EN 12079-2:2006
(Main)Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking
Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and marking
This part of EN 12079 specifies requirements for lifting sets for use with containers in offshore service.
Other parts of the standard are:
EN 12079-1, Offshore containers and associated lifting sets – Part 1: Offshore container - Design, manufacture and marking
EN 12079-3, Offshore containers and associated lifting sets – Part 3: Periodic inspection, examination and testing
Offshore-Container und zugehörige Anschlaggarnituren - Teil 2: Anschlaggarnituren - Auslegung, Herstellung und Kennzeichnung
Conteneurs pour utilisation en mer et dispositifs de levage associés - Partie 2: Dispositifs de levage - Conception, construction et marquage
Plavajoče kontejnerske enote in z njmi povezan dvižni pribor - 2. del: Dvižni pribor - Načrtovanje, izdelava in označevanje
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Offshore containers and associated lifting sets - Part 2: Lifting sets - Design, manufacture and markingConteneurs pour utilisation en mer et dispositifs de levage associés - Partie 2: Dispositifs de levage - Conception, construction et marquageOffshore-Container und zugehörige Anschlaggarnituren - Teil 2: Anschlaggarnituren - Auslegung, Herstellung und KennzeichnungTa slovenski standard je istoveten z:EN 12079-2:2006SIST EN 12079-2:2007en55.180.10General purpose containersICS:SLOVENSKI
STANDARDSIST EN 12079-2:200701-januar-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12079-2April 2006ICS 55.180.10 English VersionOffshore containers and associated lifting sets - Part 2: Liftingsets - Design, manufacture and markingConteneurs pour utilisation en mer et dispositifs de levageassociés - Partie 2: Dispositifs de levage - Conception,construction et marquageOffshore-Container und zugehörige Anschlaggarnituren -Teil 2: Anschlaggarnituren - Auslegung, Herstellung undKennzeichnungThis European Standard was approved by CEN on 9 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12079-2:2006: E
EN 12079-2:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Symbols.5 5 Technical requirements.5 5.1 General requirements.5 5.2 Dimensions and strength of lifting Sets.6 5.3 Chain slings.6 5.4 Wire rope slings.6 5.5 Shackles.7 5.6 Materials.7 5.6.1 Impact Testing.7 5.6.2 Welding.7 5.6.3 Materials used in wire rope slings.7 5.6.4 Galvanising.7 5.6.5 Material certificates.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.