EN ISO 41011:2024
(Main)Facility management - Vocabulary (ISO 41011:2024)
Facility management - Vocabulary (ISO 41011:2024)
This document defines terms used in facility management.
Facility Management - Begriffe (ISO 41011:2024)
Dieses Dokument definiert Begriffe, die in Normen für Facility Management verwendet werden.
Dieses Dokument ist unter anderen für die Folgenden bestimmt:
Personen, die mit dem Facility Management befasst sind;
Personen, die mit Aktivitäten der ISO und CEN befasst sind; und
Personen, die für nationale oder sektorspezifische Normen, Richtlinien und Verfahren im Bereich des Facility Management zuständig sind.
Es wird erwartet, dass diese Begriffe in Normen verwendet werden, die in Übereinstimmung mit dem genehmigten Arbeitsplan des ISO/TC 267 entwickelt werden.
Facility management - Vocabulaire (ISO 41011:2024)
Le présent document définit les termes utilisés en facility management.
Upravljanje objektov in storitev - Slovar (ISO 41011:2024)
Ta dokument opredeljuje izraze, ki se uporabljajo pri upravljanju objektov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2024
Upravljanje objektov in storitev - Slovar (ISO 41011:2024)
Facility management - Vocabulary (ISO 41011:2024)
Facility Management - Begriffe (ISO 41011:2024)
Facility management - Vocabulaire (ISO 41011:2024)
Ta slovenski standard je istoveten z: EN ISO 41011:2024
ICS:
01.040.03 Storitve. Organizacija Services. Company
podjetja, vodenje in kakovost. organization, management
Uprava. Transport. and quality. Administration.
Sociologija. (Slovarji) Transport. Sociology.
(Vocabularies)
03.080.10 Vzdrževalne storitve. Maintenance services.
Upravljanje objektov Facilities management
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 41011
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2024
EUROPÄISCHE NORM
ICS 01.040.03; 03.080.10 Supersedes EN ISO 41011:2018
English Version
Facility management - Vocabulary (ISO 41011:2024)
Facility management - Vocabulaire (ISO 41011:2024) Facility Management - Begriffe (ISO 41011:2024)
This European Standard was approved by CEN on 6 February 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 41011:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 41011:2024) has been prepared by Technical Committee ISO/TC 267 "Facility
management" in collaboration with Technical Committee CEN/TC 348 “Facility Management” the
secretariat of which is held by SN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2024, and conflicting national standards shall
be withdrawn at the latest by August 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 41011:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 41011:2024 has been approved by CEN as EN ISO 41011:2024 without any modification.
International
Standard
ISO 41011
Second edition
Facility management — Vocabulary
2024-02
Facility management — Vocabulaire
Reference number
ISO 41011:2024(en) © ISO 2024
ISO 41011:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 41011:2024(en)
Contents Page
Foreword .iv
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms related to facility management .1
3.2 Terms related to assets .3
3.3 Terms related to people .3
3.4 Terms related to sourcing . .5
3.5 Terms related to process .6
3.6 Terms related to finance .8
3.7 Terms related to general business .10
3.8 Terms related to measurement. 13
3.9 Terms related to technology .14
3.10 Terms related to sustainability .14
Bibliography . 17
Index .18
iii
ISO 41011:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 267, Facility management, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 348, Facility Management,
in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO 41011:2017), which has been technically
revised.
The main changes are as follows:
— categories of terms related to technology (3.9) and sustainability (3.10) have added to the document;
— the subclauses 0.1, 0.2 and 0.3 in the introduction have been updated;
— the following terms have been added: facility management organization (3.1.4), workspace (3.1.14),
constructed asset (3.2.4), service life (3.2.8), communication plan (3.3.1), cross-cultural impact (3.3.3),
responsibility assignment matrix (3.3.6), stakeholder impact assessment (3.3.8), co-sourcing (3.4.3),
performance specification (3.4.11), procurement plan (3.4.13), self-delivery service (3.4.14), facility
plan (3.5.6), life cycle assessment (3.5.7), outcome (3.5.9), output (3.5.10), post-occupancy evaluation
(3.5.11), work stage (3.5.16), acquisition cost (3.6.1), circular economy (3.6.3), construction cost (3.6.4),
cost-benefit analysis (3.6.5), end-of-life cost (3.6.6), maintenance cost (3.6.8), operation cost (3.6.10),
renewal cost (3.6.11), whole-life cost (3.6.12), facility life cycle (3.7.8), facility management strategy
(3.7.10), maintenance (3.7.11), operational level (3.7.14), resilience (3.7.17), strategic facility plan (3.7.19),
indoor environmental quality (3.8.4) computer aided facility management (3.9.1), smart building (3.9.2)
greenhouse gas (3.10.1), greenhouse gas emission (3.10.2), sustainable development (3.10.5) and well-
being (3.10.6);
— the terms have been alphabetized in subclauses;
— the term “policy” has been changed to “facility management policy”;
— the term “user” has become the preferred term and has replaced “end user”;
iv
ISO 41011:2024(en)
— the terminological entry for “interested party” has been removed and this term has been added as an
admitted term to the terminological entry for “stakeholder”.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
v
ISO 41011:2024(en)
Introduction
0.1 Purpose
The International Standards developed by ISO/TC 267 describe the characteristics of facility management
and are intended for use in both the private and public sectors.
0.2 Relationship with other standards
Common practices have been identified that can be applied across the build environment where people
work, live and play. This includes a wide variety of market sectors, organizational types, process activities
and geographies. Their im
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.