EN 14519:2005

Solid softwood panelling and cladding - Machined profiles with tongue and groove

This European Standard specifies the characteristics of solid wood panelling and cladding with tongue and groove machined from the following most common European species of softwood: spruce/fir, pine, larch, European Douglas Fir and maritime pine.
Products are intended for interior or exterior use.
NOTE   Products sold in the European Economic Area should comply with prEN 14915.

Innen- und Außenbekleidungen aus massivem Nadelholz - Profilholz mit Nut und Feder

Diese Europäische Norm legt die Merkmale von Innen- und Außenbekleidungen aus Massivholz mit Nut und
Feder, die aus den folgenden in Europa am meisten verbreiteten Nadelholzarten hergestellt werden, fest:
Fichte/Tanne, Kiefer, Lärche, Europäische Douglasie und Seekiefer.
Die Produkte sind für die Verwendung im Innen- oder Außenbereich bestimmt.
ANMERKUNG Produkte, die im Europäischen Wirtschaftsraum vertrieben werden sollten prEN 14915 entsprechen.

Lambris et bardages en bois massif résineux - Profilés usinés avec rainure et languette

La présente Norme européenne prescrit les caractéristiques des lambris et bardages en bois massif avec
rainure et languette usinés à partir des essences résineuses européennes les plus communes suivantes :
épicéa/ sapin, pin, mélèze, Douglas européen et pin maritime.
Les produits sont destinés à une utilisation intérieure ou extérieure.
NOTE Les produits vendus dans l'espace économique européen devraient satisfaire au prEN 14915.

Notranje in zunanje obloge (opaž) iz masivnega lesa iglavcev – Profili z utorom in peresom

General Information

• Status: Published
• Publication Date: 20-Dec-2005
• Withdrawal Date: 29-Jun-2006
• ICS: 79.080 - Semi-manufactures of timber
• Technical Committee: CEN/TC 175 - Round and sawn timber
• Drafting Committee: CEN/TC 175/WG 38 - Specific user requirements - Timber in cladding and panelling
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 24-Jun-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 14519:2006 - Solid softwood panelling and cladding - Machined profiles with tongue and groove

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14519:2006
01-maj-2006
Notranje in zunanje obloge (opaž) iz masivnega lesa iglavcev – Profili z utorom in
peresom
Solid softwood panelling and cladding - Machined profiles with tongue and groove
Innen- und Außenbekleidungen aus massivem Nadelholz - Profilholz mit Nut und Feder
Lambris et bardages en bois massif résineux - Profilés usinés avec rainure et languette
Ta slovenski standard je istoveten z: EN 14519:2005
ICS:
79.080 Polizdelki iz lesa Semi-manufactures of timber
SIST EN 14519:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14519:2006

---------------------- Page: 2 ----------------------
SIST EN 14519:2006
EUROPEAN STANDARD
EN 14519
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 79.080

English Version
Solid softwood panelling and cladding - Machined profiles with
tongue and groove
Lambris et bardages en bois massif résineux - Profilés Innen- und Außenbekleidungen aus massivem Nadelholz -
usinés avec rainure et languette Profilholz mit Nut und Feder
This European Standard was approved by CEN on 21 November 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14519:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14519:2006
EN 14519:2005 (E)
Contents Page
Foreword .3
Introduction.4
1 Scope.5
2 Normative references.5
3 Terms and definitions.6
4 Symbols and abbreviations.6
5 Requirements.6
5.1 General.6
5.2 Appearance and finishing .7
5.2.1 General.7
5.2.2 Grading classes.7
5.2.3 Free grade.11
5.3 Moisture content.11
5.4 Geometrical characteristics.11
5.4.1 General.11
5.4.2 Profiles.
...

SLOVENSKI STANDARD
SIST EN 14519:2006
01-maj-2006
Notranje in zunanje obloge (opaž) iz masivnega lesa iglavcev – Profili z utorom in
peresom
Solid softwood panelling and cladding - Machined profiles with tongue and groove
Innen- und Außenbekleidungen aus massivem Nadelholz - Profilholz mit Nut und Feder
Lambris et bardages en bois massif résineux - Profilés usinés avec rainure et languette
Ta slovenski standard je istoveten z: EN 14519:2005
ICS:
79.080 Polizdelki iz lesa Semi-manufactures of timber
SIST EN 14519:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14519:2006

---------------------- Page: 2 ----------------------

SIST EN 14519:2006
EUROPEAN STANDARD
EN 14519
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 79.080

English Version
Solid softwood panelling and cladding - Machined profiles with
tongue and groove
Lambris et bardages en bois massif résineux - Profilés Innen- und Außenbekleidungen aus massivem Nadelholz -
usinés avec rainure et languette Profilholz mit Nut und Feder
This European Standard was approved by CEN on 21 November 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14519:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 14519:2006
EN 14519:2005 (E)
Contents Page
Foreword .3
Introduction.4
1 Scope.5
2 Normative references.5
3 Terms and definitions.6
4 Symbols and abbreviations.6
5 Requirements.6
5.1 General.6
5.2 Appearance and finishing .7
5.2.1 General.7
5.2.2 Grading classes.7
5.2.3 Free grade.11
5.3 Moisture content.11
5.4 Geometrical characteristics.11
5.4.1 General.11
5.4.2 Profiles.
...