FprEN ISO 21898
(Main)Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO/FDIS 21898:2024)
Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods (ISO/FDIS 21898:2024)
ISO 21898:2004 specifies materials, construction and design requirements, type test, certification and marking requirements for flexible intermediate bulk containers (FIBCs) intended to contain non-dangerous solid materials in powder, granular or paste form, and designed to be lifted from above by integral or detachable devices.
Guidance is also provided on the selection and safe usage of FIBCs.
Verpackung - Flexible Großpackmittel (FIBC) für nichtgefährliche Güter (ISO/FDIS 21898:2024)
Dieses Dokument legt die Materialien, die Konstruktion und die Anforderungen an das Produkt, die Typ-Prüfungen und die Kennzeichnung von flexiblen Großpackmitteln (FIBC) fest, die für nichtgefährliche feste Füllgüter in Pulver-, Granulat- oder Pastenform und für das Anheben von oben durch integrierte oder abnehmbare Vorrichtungen vorgesehen sind.
Dieses Dokument bietet außerdem eine Anleitung für die Auswahl und den sicheren Gebrauch von FIBC.
Emballages - Grands récipients vrac souples (GRVS) pour matières non dangereuses (ISO/FDIS 21898:2024)
L'ISO 21898:2004 spécifie les matériaux, les critères de conception et de réalisation, les épreuves de qualification, ainsi que les exigences d'homologation et de marquage pour les grands récipients vrac souples (GRVS) destinés à contenir des matériaux solides non dangereux, granulés, pulvérulents ou pâteux, et conçus pour être manutentionnés par le haut, par l'intermédiaire d'organes de préhension intégrés ou amovibles.
L'ISO 21898:2004 comporte également des indications sur les critères de choix des GRVS et sur les règles de sécurité à respecter par les utilisateurs.
Embalaža - Prožni vsebniki FIBC za nenevarne snovi (ISO/FDIS 21898:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 21898:2023
01-julij-2023
Embalaža - Prožni vsebniki FIBC za nenevarne snovi (ISO/DIS 21898:2023)
Packaging - Flexible intermediate bulk containers (FIBCs) for non-dangerous goods
(ISO/DIS 21898:2023)
Verpackung - Flexible Großpackmittel (FIBC) für nichtgefährliche Güter (ISO/DIS
21898:2023)
Emballages - Grands récipients vrac souples (GRVS) pour matières non dangereuses
(ISO/DIS 21898:2023)
Ta slovenski standard je istoveten z: prEN ISO 21898
ICS:
55.180.99 Drugi standardi v zvezi z Other standards related to
distribucijo blaga s prevozom freight distribution of goods
oSIST prEN ISO 21898:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO 21898:2023
oSIST prEN ISO 21898:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 21898
ISO/TC 122/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-05-18 2023-08-10
Packaging — Flexible intermediate bulk containers (FIBCs)
for non-dangerous goods
Emballages — Grands récipients vrac souples (GRVS) pour matières non dangereuses
ICS: 55.180.99
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 21898:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
oSIST prEN ISO 21898:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 21898
ISO/TC 122/SC 3 Secretariat: BSI
Voting begins on: Voting terminates on:
Packaging — Flexible intermediate bulk containers (FIBCs)
for non-dangerous goods
Emballages — Grands récipients vrac souples (GRVS) pour matières non dangereuses
ICS: 55.180.99
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 21898:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
oSIST prEN ISO 21898:2023
ISO/DIS 21898:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Materials, construction and design .5
4.1 Materials . 5
4.2 Construction . 5
4.3 Design filling height . 5
4.4 Recycled materials . 5
5 Performance . 5
5.1 Type-testing . 5
5.2 Preparation of FIBC for test . 6
5.2.1 Filling . 6
5.2.2 Conditioning . 6
5.3 Test requirements. 6
5.3.1 Cyclic top lift test(s) . 6
5.3.2 Compression/stacking test . 7
6 Certification . 7
7 Marking . . 7
Annex A (normative) Evaluation of the UV resistance .10
Annex B (normative) Cyclic top lift test .12
Annex C (normative) Compression/stacking test .25
Annex D (informative) Guidance on selection and use of FIBCs .26
Annex E (informative) Design of FIBCs .31
Annex F (informative) Optional methods for UV resistance test .36
Bibliography .37
iii
oSIST prEN ISO 21898:2023
ISO/DIS 21898:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 21898 was prepared by Technical Committee ISO/TC 122, Packaging, Subcommittee SC 3,
Performance requirements and tests for means of packaging, packages and unit loads.
iv
oSIST prEN ISO 21898:2023
DRAFT INTERNATIONAL STANDARD ISO/DIS 21898:2023(E)
Packaging — Flexible intermediate bulk containers (FIBCs)
for non-dangerous goods
1 Scope
This document specifies materials, construction and design requirements, type test, certification
and marking requirements for flexible intermediate bulk containers (FIBCs) intended to contain non-
dangerous solid materials in powder, granular or paste form, and designed to be lifted from above by
integral or detachable devices.
Guidance is also provided on the selection and safe usage of FIBCs.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 4892-2, Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
ISO 4892-3, Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
ISO 4892-4, Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc
lamps
ISO 12048, Packaging — Complete, filled transport packages — Compression and stacking tests using a
compression tester
ISO 13934-1, Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and
elongation at maximum force using the strip method
ISO/IEC 17025, General requirements for the competence of testing and calibration laboratories
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1 General
3.1.1
flexible intermediate bulk container
FIBC
intermediate bulk container having the body made of flexible material such as woven plastic fabric or
plastics film, designed to be in contact with the contents, either directly or through an inner liner, and
collapsible when empty
3.1.2
heavy-duty reusable flexible intermediate bulk container
FIBC designed and intended to be used for a multitude of fillings and discharges, and both factory and
field repairable in such a way that the tensile strength across a repair is at least as great as that of the
original
oSIST prEN ISO 21898:2023
ISO/DIS 21898:2023(E)
3.1.3
standard-duty reusable flexible intermediate bulk container
FIBC designed and intended to be used for a limited number of fillings and discharges
Note 1 to entry: An FIBC of this category cannot be reused if damaged, i.e. it is not repairable.
Note 2 to entry: The replacement of a removable inner liner is not considered a repair.
3.1.4
single-trip flexible intermediate bulk container
FIBC designed and intended to be used for one filling only
Note 1 to entry: An FIBC of this category cannot be reused. Neither replacement of an inner liner nor repair of the
FIBC is relevant to this category.
3.1.5
FIBC type
FIBCs of like design, manufactured using like materials and methods of construction (giving at least
equal performance) to the same nominal cross-sectional dimensions
Note 1 to entry: Within a type, the circumference may be increased by up to 10 % by comparison with samples
passing a type test, provided the same geometry is maintained. Where the type has a base discharge spout,
smaller diameter discharge spouts of like design may be used.
Note 2 to entry: The presence or absence of an inner liner does not constitute a change of type.
3.1.6
safe working load
SWL
maximum load which the FIBC may carry in service, as certified
3.1.7
safety factor
SF
integer quotient between the final test load in the cyclic top lift test and the SWL value rounded down
Note 1 to entry: Safety factors may be illustrated as follows (see also B.3.3):
Example 1 Example 2
Designated SWL 500 kg 500 kg
Final load, cyclic test 2 400 kg 2 600 kg
Quotient 4,8 5,2
Integer quotient, rounded down 4 5
Note 2 to entry: The results in Example 1 above indicate a single-trip FIBC which does not meet the re
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.