EN 14035-31:2005

Fireworks - Part 31: Shell-in-mortars - Specification and test methods

This European Standard specifies requirements for the construction, performance and labelling of shell-in-mortars and the corresponding test methods. It is applicable to fireworks which are classified as shell-in-mortars of category 3 in EN 14035-2.
It is not applicable to shell-in-mortars containing pyrotechnic composition that includes any of the following substances:
   arsenic or arsenic compounds;
   mixtures containing a mass fraction of chlorates greater than 80 percent;
   mixtures of chlorates with metals;
   mixtures of chlorates with red phosphorus;
   mixtures of chlorates with potassium hexacyanoferrate(II);
   mixtures of chlorates with sulfur;
   mixtures of chlorates with sulfides;
   lead or lead compounds;
   mercury compounds;
   white phosphorus;
   picrates or picric acid;
   potassium chlorate with a mass fraction of bromates greater than 0,15 percent;
   sulfur with an acidity, expressed as mass fraction of sulfuric acid, greater than 0,002 percent;
   zirconium with a particle size of less than 40 mm.
NOTE   In EN 14035-2, shell-in-mortars are classified as follows:
brief description: assembly comprising a shell inside a mortar, from which the shell is designed to be projected;
principal effects: projection of the shell and subsequent bursting of the shell case at high altitude, with ejection of any pyrotechnic units producing visual and/or aural effect(s).
Schemes for type testing of shell-in-mortars and batch testing of shell-in-mortars are specified in Annex A and Annex B respectively.

Feuerwerkskörper - Teil 31: Feuerwerksbomben in Mörsern - Anforderungen und Prüfverfahren

Artifices de divertissement - Partie 31: Bombes logées - Spécifications et méthodes d'essai

La présente norme européenne spécifie les exigences de construction, performance et étiquetage des bombes logées, ainsi que les méthodes d’essai correspondantes. Elle s’applique aux artifices de divertissement classés sous le nom de bombes logées de catégorie 3 dans l'EN 14035-2.
Elle ne s'applique pas dans le cas de bombes logées dont la composition pyrotechnique comprend l'une des substances suivantes :
-   arsenic ou composés d’arsenic ;
-   mélanges contenant une fraction en masse de chlorates supérieure à 80 % ;
-   mélanges de chlorates et de métaux ;
-   mélanges de chlorates et de phosphore rouge ;
-   mélanges de chlorates et d’hexacyanoferrate (II) de potassium ;
-   mélanges de chlorates et de soufre ;
-   mélanges de chlorates et de sulfures ;
-   plomb ou composés de plomb ;
-   composés de mercure ;
-   phosphore blanc ;
-   picrates ou acide picrique ;
-   chlorate de potassium contenant une fraction en masse de bromates supérieure à 0,15 % ;
-   soufre présentant une acidité, exprimée en fraction de masse d’acide sulfurique supérieure à 0,002 % ;
-   zirconium ayant une taille de particule inférieure à 40 mm.
NOTE   Dans l’EN 14035-2, les bombes logées sont classées comme suit :
-   description abrégée : assemblage comprenant une bombe à l'intérieur d'un mortier duquel la bombe doit être éjectée ;
-   effets principaux : projection de la bombe et éclatement consécutif de l'enveloppe de la bombe à haute altitude, après éjection des composants élémentaires produisant des effets visuels et/ou sonores.
Les schémas d'essais de type et d'essais de lot des bombes logées sont respectivement spécifiés aux Annexes A et B.

Ognjemet – 31. del: Bomba v možnarju – Specifikacija in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 01-Nov-2005
• Withdrawal Date: 28-Sep-2010
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 212 - Fireworks
• Drafting Committee: CEN/TC 212 - Fireworks
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 29-Sep-2010
• Completion Date: 29-Sep-2010
• Ref Project: SIST EN 14035-31:2006 - Fireworks - Part 31: Shell-in-mortars - Specification and test methods

Relations

• Replaced By: EN 15947-4:2010 - Pyrotechnic articles - Fireworks, Categories 1, 2 and 3 - Part 4: Test methods
• Effective Date: 08-Jun-2022
• Replaced By: EN 15947-3:2010 - Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 3: Minimum labelling requirements
• Effective Date: 08-Jun-2022
• Replaced By: EN 15947-5:2010 - Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 5: Requirements for construction and performance
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fireworks - Part 31: Shell-in-mortars - Specification and test methodsOgnjemet – 31. del: Bomba v možnarju – Specifikacija in preskusne metodeArtifices de divertissement - Partie 31: Bombes logées - Spécifications et méthodes d'essaiFeuerwerkskörper - Teil 31: Feuerwerksbomben in Mörsern - Anforderungen und PrüfverfahrenTa slovenski standard je istoveten z:EN 14035-31:2005SIST EN 14035-31:2006en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 14035-31:200601-januar-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14035-31November 2005ICS 71.100.30 English VersionFireworks - Part 31: Shell-in-mortars - Specification and testmethodsArtifices de divertissement - Partie 31: Bombes logées -Spécifications et méthodes d'essaiFeuerwerkskörper - Teil 31: Feuerwerksbomben in Mörsern- Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 12 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14035-31:2005: E



EN 14035-31:2005 (E) 2 Contents Page Foreword.4 1 Scope.6 2 Normative references.7 3 Terms and definitions.7 4 Construction.7 4.1 Means of ignition.7 4.2 Attachment of initial fuse.7 4.3 Protection of initial fuse.7 4.4 Transmitting fuse.7 4.5 Materials of mortar and shell case.8 4.6 Integrity.8 4.7 Propellant charge.8 4.8 Location of the shell.8 4.9 Calibre.8 4.10 Gross mass.8 4.11 Net explosive content.8 4.12 Mass of report and/or bursting charge.8 4.13 Vertical stability.9
...