EN ISO 13918:2008
(Main)Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008)
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008)
ISO 13918:2008 specifies requirements for studs and ceramic ferrules for arc stud welding, dimensions, materials, mechanical properties and, when required, conditions of evaluation of conformity.
Schweißen - Bolzen und Keramikringe für das Lichtbogenbolzenschweißen (ISO 13918:2008)
Diese Internationale Norm legt Anforderungen für Bolzen und Keramikringe für das Lichtbogenbolzen¬schweißen fest.
Diese Internationale Norm legt Maße, Werkstoffe, mechanische Eigenschaften und, wenn erforderlich, Bedin-gungen für die Konformitätsbewertung fest.
Tabelle 1 zeigt Bolzentypen und die Kurzzeichen für Bolzen und Keramikringe, die in dieser Internationalen Norm verwendet werden.
Soudage - Goujons et bagues céramiques pour le soudage à l'arc des goujons (ISO 13918:2008)
L'ISO 13918:2008 spécifie ce qui suit:
les exigences relatives aux goujons et aux bagues en céramique dans le cadre du soudage des goujons;
les dimensions, les matériaux constitutifs et les propriétés mécaniques des goujons.
Varjenje - Čepi in keramični obroči za obločno varjenje čepov (ISO 13918:2008)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2008
1DGRPHãþD
SIST EN ISO 13918:1999
9DUMHQMHýHSLLQNHUDPLþQLREURþL]DREORþQRYDUMHQMHþHSRY ,62
Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2008)
Schweißen - Bolzen und Keramikringe für das Lichtbogenbolzenschweißen (ISO
13918:2008)
Soudage - Goujons et bagues céramiques pour le soudage a l'arc des goujons (ISO
13918:2008)
Ta slovenski standard je istoveten z: EN ISO 13918:2008
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13918
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 21.060.10; 25.160.10 Supersedes EN ISO 13918:1998
English Version
Welding - Studs and ceramic ferrules for arc stud welding (ISO
13918:2008)
Soudage - Goujons et bagues céramiques pour le soudage Schweißen - Bolzen und Keramikringe für das
à l'arc des goujons (ISO 13918:2008) Lichtbogenbolzenschweißen (ISO 13918:2008)
This European Standard was approved by CEN on 16 January 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13918:2008: E
worldwide for CEN national Members.
Contents Page
Foreword.3
Foreword
This document (EN ISO 13918:2008) has been prepared by Technical Committee ISO/TC 44 "Welding and
allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13918:1998.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 13918:2008 has been approved by CEN as a EN ISO 13918:2008 without any modification.
INTERNATIONAL ISO
STANDARD 13918
Second edition
2008-02-15
Welding — Studs and ceramic ferrules for
arc stud welding
Soudage — Goujons et bagues céramiques pour le soudage à l'arc des
goujons
Reference number
ISO 13918:2008(E)
©
ISO 2008
ISO 13918:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
ISO 13918:2008(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions. 2
4 Symbols and abbreviated terms . 2
5 Requirements . 3
5.1 Ordering information. 3
5.2 Dangerous substances . 3
5.3 Product requirements. 3
5.4 Durability . 5
6 Testing for conformity evaluation. 5
6.1 General. 5
6.2 Testing for dangerous substances . 5
6.3 Testing of dimensional requirements of the studs . 5
6.4 Testing of mechanical characteristics of studs . 5
6.5 Weldability . 6
7 Evaluation of conformity. 6
7.1 General. 6
7.2 Initial type testing . 6
7.3 Factory production control (FPC) . 7
8 Documentation of test results . 9
9 Dimensions of studs. 10
9.1 General. 10
9.2 Threaded stud (PD). 10
9.3 Threaded stud with reduced shaft (RD). 12
9.4 Unthreaded stud (UD). 13
9.5 Stud with internal thread (ID). 14
9.6 Shear connector (SD) . 15
9.7 Threaded stud with flange (PS) . 16
9.8 Unthreaded stud (US). 18
9.9 Stud with internal thread (IS). 19
9.10 Threaded stud (PT) . 20
9.11 Unthreaded stud (UT) . 21
9.12 Stud with internal thread (IT). 22
10 Dimensions of ceramic ferrules . 23
10.1 General. 23
10.2 Ceramic ferrule for threaded stud (PF). 23
10.3 Ceramic ferrule for unthreaded stud and shear connector (UF) . 24
10.4 Ceramic ferrule for threaded stud with reduced shaft (RF). 25
11 Manufacture and finish. 25
11.1 Threaded studs (PD), unthreaded studs (UD), threaded studs with reduced shaft (RD). 25
11.2 Shear connectors (SD) . 25
12 Inspection . 26
12.1 General. 26
12.2 Chemical analysis. 26
ISO 13918:2008(E)
12.3 Mechanical tests . 26
12.4 Sample size. 26
13 Marking. 27
13.1 Studs . 27
13.2 Ceramic ferrules. 27
14 Designation. 27
14.1 Studs . 27
14.2 Ceramic ferrules. 28
Annex A (informative) Mass of studs. 29
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.