EN 10249-1:2023
(Main)Cold formed steel sheet piles - Part 1: Technical delivery conditions
Cold formed steel sheet piles - Part 1: Technical delivery conditions
This document specifies the requirements for cold formed steel sheet piles produced from hot rolled strip or sheet with a thickness equal to or greater than 3 mm in respect of its chemical composition, mechanical properties and conditions of delivery.
The products specified are for general, structural and civil engineering works. The types of steel sheet piles covered by this document are: Z-shaped, Omega-shaped and trench sheets. The requirements in respect of tolerances on shape and dimensions are specified in Part 2 of this document.
Kaltgeformte Spundbohlen aus Stahl - Teil 1: Technische Lieferbedingungen
Dieses Dokument legt Anforderungen an kaltgeformte Spundbohlen, hergestellt aus warmgewalztem Band oder Blech mit einer Dicke ≥ 3 mm, hinsichtlich ihrer chemischen Zusammensetzung, mechanischen Eigenschaften und Lieferbedingungen fest.
Die angegebenen Erzeugnisse eignen sich für allgemeine Zwecke, Stahlbau und Tiefbauarbeiten. Diese Norm behandelt folgende Formen von Stahlspundbohlen: Z-Profil, Omega-Profil und Kanaldiele. Die Festlegungen bezüglich der Grenzabmaße und Formtoleranzen sind in Teil 2 dieses Dokumentes enthalten.
Palplanches en acier profilées à froid - Partie 1 : Conditions techniques de livraison
Le présent document spécifie les prescriptions relatives à la composition chimique, aux caractéristiques mécaniques et aux conditions de livraison des palplanches en acier formées à froid à partir de bandes ou tôles laminées à chaud d’épaisseur supérieure ou égale à 3 mm.
Les produits désignés sont destinés à être utilisés dans la réalisation d'ouvrages divers, d'ouvrages de génie civil et d'éléments de construction. Les types de palplanches en acier couverts dans le présent document sont : les palplanches en Z, en Oméga et les rideaux de coffrage. Les prescriptions relatives aux tolérances sur forme et les dimensions sont spécifiées dans la Partie 2 du présent document.
Hladno oblikovana jeklena obešala - 1. del: Tehnični dobavni pogoji
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 10249-1:2022
01-april-2022
Hladno oblikovana jeklena obešala - 1. del: Tehnični dobavni pogoji
Cold formed steel sheet piles - Part 1: Technical delivery conditions
Kaltgeformte Spundbohlen aus Stahl - Teil 1: Technische Lieferbedingungen
Palplanches profilées à froid en acier - Partie 1 : Conditions techniques de livraison
Ta slovenski standard je istoveten z: prEN 10249-1
ICS:
77.140.45 Nelegirana jekla Non-alloyed steels
77.140.70 Jekleni profili Steel profiles
oSIST prEN 10249-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 10249-1:2022
---------------------- Page: 2 ----------------------
oSIST prEN 10249-1:2022
DRAFT
EUROPEAN STANDARD
prEN 10249-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2022
ICS 77.140.70 Will supersede EN 10249-1:1995
English Version
Cold formed steel sheet piles - Part 1: Technical delivery
conditions
Palplanches profilées à froid en acier - Partie 1 : Kaltgeformte Spundbohlen aus Stahl - Teil 1:
Conditions techniques de livraison Technische Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 459/SC 3.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 10249-1:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 10249-1:2022
prEN 10249-1:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Classification and designation . 5
4.1 Classification. 5
4.2 Designation . 6
5 Information to be supplied by the purchaser . 6
5.1 Mandatory information . 6
5.2 Options . 6
6 Manufacturing process . 6
6.1 Steel making process . 6
6.2 Delivery conditions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.