EN 13445-5:2014/A1:2018

Unfired pressure vessels - Part 5: Inspection and testing

This Part of this European Standard specifies the inspection and testing of individual and serially produced pressure vessels made of steels in accordance with EN 13445-2:2014.
Special provisions for cyclic operation are given in Annex G of this Part.
Special provisions for vessels or vessel parts working in the creep range are given in Annex F and Annex I of this Part.
NOTE   The responsibilities of parties involved in the conformity assessment procedures are given in Directive 97/23/EC. Guidance on this can be found in CR 13445-7.

Unbefeuerte Druckbehälter - Teil 5: Inspektion und Prüfung

Dieser Teil der EN 13445 legt die Inspektion und Prüfung von einzelnen und in Serie gefertigten Druckbehältern aus Stählen nach EN 13445-2:2014 fest.
Besondere Anforderungen für den Betrieb unter zyklischer Belastung sind in Anhang G dieser Norm enthalten.
Besondere Anforderungen für Druckbehälter oder Druckbehälterteile, die im Zeitstandbereich betrieben werden, sind in Anhang F und Anhang I dieser Norm festgelegt.
ANMERKUNG   Wird eine CE-Kennzeichnung gewünscht, können weitere Informationen über Tätigkeiten in Verbindung mit den verschiedenen Stellen, die Prüfungen durchführen, CR 13445-7 entnommen werden.

Récipients sous pression non soumis à la flamme - Partie 5 : Inspection et contrôles

La présente partie de la Norme européenne traite de l'inspection et des contrôles des récipients sous pression construits à l'unité ou en série, à partir d'aciers conformes à l’EN 13445-2:2014.
Des dispositions particulières relatives à l’exploitation cyclique sont données dans l’Annexe G de la présente Partie.
Des dispositions particulières relatives aux récipients ou parties de récipients en service dans le domaine de fluage sont données dans l’Annexe F et l’Annexe I de la présente partie.
NOTE   Les responsabilités des parties impliquées dans les procédures d’évaluation de la conformité sont données dans la directive 97/23/CE. Un guide relatif à cet aspect peut être trouvé dans le CR 13445-7.

Neogrevane (nekurjene) tlačne posode - 5. del: Pregled in preskušanje - Dopolnilo A1

General Information

• Status: Withdrawn
• Publication Date: 04-Sep-2018
• Withdrawal Date: 13-Apr-2025
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• Technical Committee: CEN/TC 54 - Unfired pressure vessels
• Drafting Committee: CEN/TC 54/WG 55 - E - Inspection and testing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 12-May-2021
• Completion Date: 14-Apr-2025
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13445-5:2014/A1:2018 - Unfired pressure vessels - Part 5: Inspection and testing

Relations

• Replaced By: EN 13445-5:2021 - Unfired pressure vessels - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022
• Amends: EN 13445-5:2014 - Unfired pressure vessels - Part 5: Inspection and testing
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2018
1HRJUHYDQHQHNXUMHQHWODþQHSRVRGHGHO3UHJOHGLQSUHVNXãDQMH'RSROQLOR
$
Unfired pressure vessels - Part 5: Inspection and testing
Unbefeuerte Druckbehälter - Teil 5: Inspektion und Prüfung
Récipients sous pression non soumis à la flamme - Partie 5 : inspection et contrôles
Ta slovenski standard je istoveten z: EN 13445-5:2014/A1:2018
ICS:
23.020.32 7ODþQHSRVRGH Pressure vessels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 13445-5:2014/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2018
EUROPÄISCHE NORM
ICS 23.020.30
English Version
Unfired pressure vessels - Part 5: Inspection and testing
Récipients sous pression non soumis à la flamme - Unbefeuerte Druckbehälter - Teil 5: Inspektion und
Partie 5 : Inspection et contrôles Prüfung
This amendment A1 modifies the European Standard EN 13445-5:2014; it was approved by CEN on 30 April 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13445-5:2014/A1:2018 E
worldwide for CEN national Members.

---
...