iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10272:2000

(Main)

Stainless steel bars for pressure purposes

Stainless steel bars for pressure purposes

1.1 This European Standard specifies the technical delivery conditions for hot and cold formed stainless steel bars for pressure purposes supplied in accordance with one of the process routes and surface finishes listed in Table 5. 1.2 The general technical delivery conditions specified in EN 10021 apply in addition to the specifications of this European Standard, unless otherwise specified in this European Standard.

Nichtrostende Stäbe für Druckbehälter

1.1 Diese Europäische Norm legt die technischen Lieferbedingungen für warm- und kaltgeformte Stäbe aus nichtrostenden Stählen für Druckbehälter nach einer der in Tabelle 5 angegeben Ausführungsarten und Oberflächenbeschaffenheiten fest. 1.2 Zusätzlich zu den Angaben dieser Europäischen Norm gelten, sofern in dieser Europäischen Norm nichts anderes festgelegt ist, die in EN 10021 wiedergegebenen allgemeinen technischen Lieferbedingungen.

Barres en acier inoxydable pour appareils à pression

1.1 La présente norme européenne spécifie les conditions techniques de livraison des barres en acier inoxydable formées à chaud et à froid pour appareils à pression, livrées conformément à l'une des gammes de fabrication et à l'un des états de surface énumérés au Tableau 5. 1.2 Les conditions techniques générales de livraison spécifiées dans l'EN 10021 s'appliquent en plus des spécifications de la présente norme européenne, sauf indication contraire dans la présente norme européenne.

Nerjavne jeklene palice za tlačne posode

General Information

Status
Withdrawn
Publication Date
17-Oct-2000
Withdrawal Date
16-Oct-2007
ICS
77.140.20 - Stainless steels
77.140.30 - Steels for pressure purposes
77.140.60 - Steel bars and rods
Technical Committee
ECISS/TC 107 - Steels for pressure purposes
Drafting Committee
ECISS/TC 22 - Steels for pressure purposes - Qualities
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Oct-2007
Completion Date
17-Oct-2007
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
SIST EN 10272:2001 - Stainless steel bars for pressure purposes

Relations

Replaced By
EN 10272:2007 - Stainless steel bars for pressure purposes
Effective Date
22-Dec-2008

Buy Standard

EN 10272:2001EN 10272:2001
PreviousNext
Standard
EN 10272:2001
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 10272:2001
01-november-2001
1HUMDYQHMHNOHQHSDOLFH]DWODþQHSRVRGH
Stainless steel bars for pressure purposes
Nichtrostende Stäbe für Druckbehälter
Barres en acier inoxydable pour appareils a pression
Ta slovenski standard je istoveten z: EN 10272:2000
ICS:
77.140.30 J
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO/ASTM 52924:2023(Main)
Additive manufacturing of polymers - Qualification principles - Classification of part properties (ISO/ASTM 52924:2023)
SIST EN ISO/ASTM 52924:2023

This document establishes the required or the achievable classes of part properties for additive manufactured polymer parts in order to get a common understanding on part quality. It is aimed at providers of manufacturing services for polymer parts who use additive manufacturing machines and at the customers for these services. Designers of parts as well as buyers and providers of manufacturing services can specify, in a traceable manner, the required or the achievable level of part properties with the aid of this document. The classification is based on mechanical, physical and geometrical properties. Further properties can be defined between buyer and provider of manufacturing.
This document is applicable to parts that have been manufactured from a thermoplastic polymer by means of thermal reaction fusion of material typically applied by a powder bed fusion (PBF) or material extrusion (MEX) processes. This document is also applicable to thermoplastic parts made by other processes, provided that due consideration is given to process-specific topics.
The classification of part properties applies to parts in as-built condition, that have been unpacked from the build space, with all support structures removed, but prior to any post-processing operations.
Specific industries (e.g. aerospace and medical) typically specify additional requirements.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19111:2020/A2:2023(Amendment)
Geographic information - Referencing by coordinates - Amendment 2 (ISO 19111:2019/Amd 2:2023)
SIST EN ISO 19111:2020/oprA2:2023
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3581:2023(Main)
Welding consumables - Covered electrodes for manual metal arc welding of stainless and heat-resisting steels - Classification (ISO 3581:2023)
SIST EN ISO 3581:2023

This document specifies requirements for classification of covered electrodes, based on the all-weld metal chemical composition, the type of electrode covering and other electrode properties, and the all-weld metal mechanical properties, in the as-welded or heat-treated conditions, for manual metal arc welding of stainless and heat-resisting steels.
This document is a combined standard providing for classification utilizing a system based upon classification according to nominal composition or utilizing a system based upon classification according to alloy type.
a)       Paragraphs and tables which carry the label “classification according to nominal composition-A” or “ISO 3581-A” are applicable only to products classified to that system.
b)       Paragraphs and tables which carry the label “classification according to alloy type-B” or “ISO 3581-B” are applicable only to products classified to that system.
c)        Paragraphs and tables which carry neither label are applicable to products classified according to either or both systems.
Annex B gives information on considerations on weld metal ferrite content.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11363-1:2018/A1:2023(Amendment)
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
SIST EN ISO 11363-1:2018/A1:2023
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11267:2023(Main)
Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023)
SIST EN ISO 11267:2023

This document specifies one of the methods for evaluating the habitat function of soils and determining effects of soil contaminants and substances on the reproduction of Folsomia candida Willem by dermal and alimentary uptake. This document also provides information on how to use this method for testing substances under temperate conditions.
The chronic test described is applicable to soils and soil materials of unknown quality, e.g. from contaminated sites, amended soils, soils after remediation, industrial, agricultural or other sites of concern and waste materials.
The method is not applicable to volatile substances, i.e. substances for which H (Henry's constant) or the air/water partition coefficient is greater than 1, or for which the vapour pressure exceeds 300 Pa at 25 °C.

  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18743:2015/A1:2023(Amendment)
Microbiology of the food chain - Detection of Trichinella larvae in meat by artificial digestion method - Amendment 1: Method validation studies and performance characteristics (ISO 18743:2015/Amd 1:2023)
SIST EN ISO 18743:2015/A1:2023
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 4880:2023(Main)
Aerospace series - General technical specification for standard parts
kSIST FprEN 4880:2022
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17573-3:2023(Main)
Electronic fee collection - System architecture for vehicle-related tolling - Part 3: Data dictionary (ISO 17573-3:2023)
kSIST FprEN ISO 17573-3:2023

This document specifies the syntax and semantics of data objects in the field of electronic fee collection (EFC). The definitions of data types and assignment of semantics are provided in accordance with the abstract syntax notation one (ASN.1) technique, as specified in ISO/IEC 8824-1. This document defines:
—     ASN.1 (data) types within the fields of EFC;
—     ASN.1 (data) types of a more general use that are used more specifically in standards related to EFC.
This document does not seek to define ASN.1 (data) types that are primarily related to other fields that operate in conjunction with EFC, such as cooperative intelligent transport systems (C-ITS), the financial sector, etc.

  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16062:2023(Main)
Intelligent transport systems - ESafety - eCall high level application requirements (HLAP) using GSM/UMTS circuit switched networks
kSIST FprEN 16062:2022

In respect of pan-European eCall (operating requirements defined in EN 16072), this document defines the high-level application protocols, procedures and processes required to provide the eCall service using a TS12 emergency call over a circuit-switched mobile communications network.
NOTE 1   The objective of implementing the pan-European in-vehicle emergency call system (eCall) is to automate the notification of a traffic accident, wherever in Europe, with the same technical standards and the same quality of services objectives by using a PLMN (such as ETSI prime medium) which supports the European harmonized 112/E112 emergency number (TS12 ETSI TS 122 003) and to provide a means of manually triggering the notification of an emergency incident.
NOTE 2   HLAP requirements for third-party services supporting eCall can be found in EN 16102, and have been developed in conjunction with the development of this work item, and is consistent in respect of the interface to the PSAP. This deliverable makes reference to those provisions but does not duplicate them.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23739:2023(Main)
Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of zirconium oxide powders (ISO 23739:2021)
SIST EN ISO 23739:2023

This document specifies methods for the chemical analysis of zirconium oxide powders used as the raw material for fine ceramics.
It stipulates the determination methods of the zirconium, aluminium, barium, calcium, cerium, cobalt, gadolinium, hafnium, iron, magnesium, potassium, silicon, sodium, strontium, titanium and yttrium contents in zirconium oxide powders for fine ceramics. The test sample is decomposed by acid pressure decomposition or alkali fusion. Contents of zirconium and yttrium are determined by using either a precipitation and gravimetric method or an inductively coupled plasma-optical emission spectrometry (ICP-OES) method. Contents of aluminium, barium, calcium, cerium, cobalt, gadolinium, hafnium, iron, magnesium, potassium, silicon, sodium, strontium and titanium are determined by using an ICP-OES method.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day