iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 8384:2018

(Main)

Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2018)

Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2018)

This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists.
This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil and rocks.
The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise.
A combination of terms is allowed in application.

Schiffe und Meerestechnik - Schwimmbagger - Begriffe (ISO 8384:2018)

Navires et technologie maritime - Dragues - Vocabulaire (ISO 8384:2018)

Le présent document définit les termes et définitions relatifs aux dragues dans le but de donner des définitions suffisamment claires pour que chaque terme puisse être compris par tous les spécialistes.
Le présent document n'est applicable qu'aux équipements utilisés pour la construction et l'entretien des voies navigables et pour l'extraction du sol et de roches.
Les termes définis dans le présent document sont destinés aux documents de tous types. Certains termes normalisés sont aussi donnés avec leurs formes abrégées, qui peuvent être utilisées dans les cas où aucune confusion n'est possible.
Il est admis d'employer des combinaisons de termes pour des raisons pratiques.

Ladje in pomorska tehnologija - Plovni bagri - Slovar (ISO 8384:2018)

Ta dokument določa izraze in definicije v zvezi s plovnimi bagri za namene zagotavljanja ustreznega razumevanja posameznih izrazov, ki jih uporabljajo strokovnjaki.
Ta dokument se uporablja samo za opremo, ki se uporablja za vzpostavitev in vzdrževanje plovnih poti ter izkopavanje zemlje in kamnin.
V tem dokumentu opredeljeni izrazi so predvideni za uporabo v različnih dokumentacijah. Nekateri standardizirani izrazi so podani tudi v skrajšani različici in se lahko uporabljajo v primerih brez možnosti napačne razlage.
Primeri uporabe lahko vključujejo kombinacijo izrazov.

General Information

Status
Withdrawn
Publication Date
18-Sep-2018
Withdrawal Date
01-Oct-2019
ICS
01.040.47 - Shipbuilding and marine structures (Vocabularies)
47.060 - Inland navigation vessels
Technical Committee
CEN/TC 15 - Inland navigation vessels
Drafting Committee
CEN/TC 15 - Inland navigation vessels
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
02-Oct-2019
Ref Project
SIST EN ISO 8384:2018 - Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2018)

Relations

Replaces
EN ISO 8384:2001 - Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2000)
Effective Date
08-Jun-2022
Replaced By
EN ISO 8384:2019 - Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2019)
Effective Date
09-Oct-2019

Buy Standard

EN ISO 8384:2018EN ISO 8384:2018
PreviousNext
Standard
EN ISO 8384:2018
English language
29 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8384:2018
01-december-2018
1DGRPHãþD
SIST EN ISO 8384:2002
Ladje in pomorska tehnologija - Plovni bagri - Slovar (ISO 8384:2018)
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2018)
Schiffe und Meerestechnik - Schwimmbagger - Begriffe (ISO 8384:2018)
Navires et technologie maritime - Dragues - Vocabulaire (ISO 8384:2018)
Ta slovenski standard je istoveten z: EN ISO 8384:2018
ICS:
01.040.47 Ladjedelništvo in konstrukcije Shipbuilding and marine
na morju (Slovarji) structures (Vocabularies)
47.020.40 Dvigalna oprema in oprema Lifting and cargo handling
za pretovor equipment
SIST EN ISO 8384:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8384:2018

---------------------- Page: 2 ----------------------

SIST EN ISO 8384:2018


EN ISO 8384
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2018
EUROPÄISCHE NORM
ICS 01.040.47; 47.060 Supersedes EN ISO 8384:2001
English Version

Ships and marine technology - Dredgers - Vocabulary (ISO
8384:2018)
Navires et technologie maritime - Dragues - Schiffe und Meerestechnik - Schwimmbagger - Begriffe
Vocabulaire (ISO 8384:2018) (ISO 8384:2018)
This European Standard was approved by CEN on 19 August 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8384:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8384:2018
EN ISO 8384:2018 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8384:2018
EN ISO 8384:2018 (E)
European foreword
This document (EN ISO 8384:2018) has been prepared by Technical Committee ISO/TC 8 "Ships and
marine technology" in collaboration with Technical Committee CEN/TC 15 “Inland navigation vessels”
the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2019, and conflicting national standards shall
be withdrawn at the latest by March 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8384:2001.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8384:2018 has been approved by CEN as EN ISO 8384:2018 without any modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 8384:2018

---------------------- Page: 6 ----------------------

SIST EN ISO 8384:2018
INTERNATIONAL ISO
STANDARD 8384
Third edition
2018-08
Ships and marine technology —
Dredgers — Vocabulary
Navires et technologie maritime — Dragues — Vocabulaire
Reference number
ISO 8384:2018(E)
©
ISO 2018

---------------------- Page: 7
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 8384:2019(Main)
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2019)
SIST EN ISO 8384:2019

This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists.
This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil.
The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise.
A combination of terms is allowed in application.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13551:2003(Main)
Inland navigation vessels - Vocabulary
SIST EN 13551:2004

This European Standard gives terms and definitions for concepts currently used for inland navigation systems. This standard is intended to facilitate understanding of inland navigation vessels at an international level. The standard is not applicable to leisure boating activities.

  • Standard
    67 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8384:2019(Main)
Ships and marine technology - Dredgers - Vocabulary (ISO 8384:2019)
SIST EN ISO 8384:2019

This document specifies terms and definitions relating to dredgers, with the aim of giving clear enough definitions for every term for them to be understood by all specialists.
This document is applicable only to equipment which is used for the construction and maintenance of navigable waterways and the extraction of soil.
The terms specified in this document are intended to be used in documentation of all kinds. Certain standardized terms are also given with their abridged version; these can be used in cases where no possibility of misinterpretation can arise.
A combination of terms is allowed in application.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13551:2003(Main)
Inland navigation vessels - Vocabulary
SIST EN 13551:2004

This European Standard gives terms and definitions for concepts currently used for inland navigation systems. This standard is intended to facilitate understanding of inland navigation vessels at an international level. The standard is not applicable to leisure boating activities.

  • Standard
    67 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
kSIST FprEN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day