Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and form

This document specifies tolerances on dimensions and form of extruded precision profiles, in alloys EN AW-6060 and EN AW-6063 manufactured with and without a thermal barrier (see Figures 1 and 2). It applies to extruded products supplied without further surface treatment. Precision profiles covered in this standard are distinguished from extruded profiles for general applications covered in EN 755-9 by the following characteristics:
   they are mainly for architectural applications;
   they meet more stringent requirements regarding the surface condition of visible surfaces;
   the maximum diameter of the circumscribing circle CD is 350 mm;
   they are made to closer tolerances on dimensions and form.
In the case of profiles which, due to the complexity of their design, are difficult to manufacture and specify, then special agreements between supplier and purchaser may need to be reached.
NOTE   The effect of the thermal barrier material on the dimensional tolerances is covered by this document although the actual thermal barrier material itself is not (see EN 14024).

Aluminium und Aluminiumlegierungen - Stranggepresste Präzisionsprofile aus Legierungen EN AW-6060 und EN AW-6063 - Teil 2: Grenzabmaße und Formtoleranzen

Dieses Dokument legt die Grenzabmaße und Formtoleranzen für stranggepresste Präzisionsprofile aus den Legierungen EN AW-6060 und EN AW-6063, die mit oder ohne Wärmedämmung (siehe Bild 1 bzw. Bild 2) hergestellt werden, fest. Es gilt für stranggepresste Erzeugnisse, die ohne weitere Oberflächenbehandlung hergestellt werden. Die Präzisionsprofile, die Gegenstand dieser Norm sind, unterscheiden sich von den stranggepressten Profilen für allgemeine Anwendungen nach EN 755-9 wie folgt:
   sie sind hauptsächlich für Anwendungen im Architekturbereich vorgesehen;
   sie entsprechen strengeren Anforderungen im Hinblick auf den Zustand der sichtbaren Oberflächen;
   der Durchmesser des maximalen Umschlingungskreises (en: diameter of the circumscribing circle (CD)) beträgt 350 mm;
   sie weisen engere Grenzabmaße und Formtoleranzen auf.
Bei Profilen, die aufgrund ihrer komplexen Konstruktion schwierig herzustellen und zu spezifizieren sind, können besondere Vereinbarungen zwischen Lieferer und Käufer notwendig sein.
ANMERKUNG   Der Einfluss des Materials für die Wärmedämmung auf die Grenzabmaße wird in diesem Dokument berücksichtigt, wenngleich das eigentliche Material für die Wärmedämmung nicht enthalten ist (siehe EN 14024).
Legende
1   CD max. 350 mm   Legende
1   CD max. 350 mm
2   Wärmedämmung
Bild 1 — Profil ohne Wärmedämmung
Bild 2 — Profil mit Wärmedämmung

Aluminium et alliages d'aluminium - Profilés de précision filés en alliages EN AW-6060 et EN AW-6063 - Partie 2: Tolérances sur dimensions et forme

Le présent document spécifie les tolérances sur dimensions et forme des profilés filés de précision en alliages EN AW-6060 et EN AW-6063 fabriqués avec ou sans barrière thermique (voir Figures 1 et 2). Il s’applique aux produits filés fournis sans traitement de surface spécifique. Les profilés de précision couverts par cette norme sont distincts des produits filés pour application générale couverts par l’EN 755-9 par les caractéristiques suivantes :
   ils sont principalement destinés aux applications architecturales ;
   ils satisfont à des exigences plus rigoureuses en ce qui concerne l’état des surfaces visibles ;
   le diamètre maximal du cercle circonscrit CD est de 350 mm ;
   ils sont fabriqués avec des tolérances sur dimensions et forme plus serrées.
Dans le cas de profilés lesquels, en raison de la complexité de leur conception, sont difficiles à fabriquer et à spécifier, des accords spéciaux entre l’acheteur et le fabricant sont à trouver.
NOTE   Les effets du matériau de barrière thermique sur les tolérances dimensionnelles sont couverts par ce document, même si le matériau de la barrière thermique lui-même ne l’est pas (voir EN 14024).
Dimensions en millimètres
Légende   Légende
1   CD maximum 350 mm   1   CD maximum 350 mm
      2   barrière thermique
Figure 1 — Profilé sans barrière thermique   Figure 2 — Profilé avec barrière thermique

Aluminij in aluminijeve zlitine - Precizni iztiskani profili v zlitinah EN AW-6060 in EN AW-6063 - 2. del: Tolerance mer in oblike

General Information

Status
Withdrawn
Publication Date
18-Mar-2008
Withdrawal Date
06-Dec-2016
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
07-Dec-2016

Relations

Buy Standard

Standard
EN 12020-2:2008
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and formAluminij in aluminijeve zlitine - Precizni iztiskani profili v zlitinah EN AW-6060 in EN AW-6063 - 2. del: Tolerance mer in oblikeAluminium et alliages d'aluminium - Profilés de précision filés en alliages EN AW-6060 et EN AW-6063 - Partie 2: Tolérances sur dimensions et formeAluminium und Aluminiumlegierungen - Stranggepresste Präzisionsprofile aus Legierungen EN AW-6060 und EN AW-6063 - Teil 2: Grenzabmaße und FormtoleranzenTa slovenski standard je istoveten z:EN 12020-2:2008SIST EN 12020-2:2008en77.150.10ICS:SIST EN 12020-2:20021DGRPHãþDSLOVENSKI
STANDARDSIST EN 12020-2:200801-maj-2008







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12020-2March 2008ICS 77.150.10Supersedes EN 12020-2:2001
English VersionAluminium and aluminium alloys - Extruded precision profiles inalloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances ondimensions and formAluminium et alliages d'aluminium - Profilés de précisionfilés en alliages EN AW-6060 et EN AW-6063 - Partie 2:Tolérances sur dimensions et formeAluminium und Aluminiumlegierungen - StranggepresstePräzisionsprofile aus Legierungen
EN AW-6060 und ENAW-6063 - Teil 2: Grenzabmaße und FormtoleranzenThis European Standard was approved by CEN on 10 February 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12020-2:2008: E



EN 12020-2:2008 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Tolerances on dimensions.5 3.1 General.5 3.2 Cross-sectional dimensions.5 3.2.1 General.5 3.2.2 Tolerances on dimensions other than wall thickness.6 3.2.3 Tolerances on wall thickness of solid and hollow profiles.6 3.3 Length.7 3.4 Squareness of cut ends.8 3.5 Length offset for profiles with a thermal barrier.8 4 Tolerances on form.8 4.1 Plane parallelism.8 4.2 Straightness.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.