EN ISO 18134-3:2023
(Main)Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023)
Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023)
This document describes the method of determining the moisture content in the general analysis sample by drying in an oven. The method described in this document is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).
Since biofuels in small particle size are very hygroscopic, their moisture content will change with humidity in the atmosphere and, therefore, the moisture of the general analysis sample is determined simultaneously with the determination of other properties being measured (e.g. calorific value, volatile matter, metals, etc.).
NOTE Biomass materials can contain small amounts of volatile organic compounds (VOC) which can evaporate when determining moisture content by oven drying (see References [1] and [2]). The release of such compounds is quite small relative to the overall moisture content as determined by this method and is disregarded in this document.
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Teil 3: Wassergehalt in allgemeinen Analysenproben (ISO 18134-3:2023)
Dieses Dokument beschreibt das Verfahren zur Bestimmung des Wassergehaltes in der allgemeinen Analysenprobe durch Trocknung in einem Ofen. Das in diesem Dokument beschriebene Verfahren ist für alle biogenen Festbrennstoffe anwendbar. Der Wassergehalt von biogenen Festbrennstoffen (im Anlieferungszustand) wird immer bezogen auf die Gesamtmasse der Versuchsprobe (Bezugsbasis Feuchtmasse) angegeben.
Da biogene Brennstoffe mit kleiner Partikelgröße stark hygroskopisch sind, ändert sich deren Wassergehalt bei Änderung der Luftfeuchte, und deshalb wird der Wassergehalt der allgemeinen Analysenprobe gleichzeitig mit der Bestimmung anderer zu messender Eigenschaften (z. B. Energiegehalt, flüchtige Bestandteile, Metalle usw.) ermittelt.
ANMERKUNG Biomasse-Materialien können geringe Mengen an flüchtigen organischen Verbindungen (VOC, en: volatile organic compounds) enthalten, die bei der Bestimmung des Wassergehaltes durch Ofentrocknung verdampfen können (siehe Literaturhinweise [1] und [2]). Die Freisetzung derartiger Verbindungen ist im Verhältnis zum Gesamtgehalt an Wasser, der mit diesem Verfahren bestimmt wird, verhältnismäßig gering und wird in diesem Dokument vernachlässigt.
Biocombustibles solides - Dosage de la teneur en humidité - Partie 3: Humidité de l'échantillon pour analyse générale (ISO 18134-3:2023)
Le présent document décrit la méthode de dosage de la teneur en humidité de l'échantillon pour analyse par séchage à l'étuve. La méthode décrite dans le présent document est applicable à l’ensemble des biocombustibles solides. La teneur en humidité des biocombustibles solides (à réception) est toujours rapportée à la masse totale de l'échantillon pour essai (base humide).
Les biocombustibles constitués de particules de petite taille étant très hygroscopiques, leur teneur en humidité varie en fonction de l'humidité de l'atmosphère et, par conséquent, l'humidité de l’échantillon pour analyse générale est établie simultanément avec la détermination d’autres propriétés mesurées (par exemple, le pouvoir calorifique, la matière volatile, les métaux, etc.).
NOTE Les matériaux de la biomasse peuvent contenir de petites quantités de composés organiques volatils (COV) qui peuvent s'évaporer lors du dosage de la teneur en humidité par séchage à l’étuve (voir Références[1] et[2]). La libération de ces composés est très faible par rapport à la teneur en humidité globale telle que déterminée par cette méthode et n'est pas prise en compte dans le présent document.
Trdna biogoriva - Določevanje vlage - 3. del: Vlaga v splošnem analiznem vzorcu (ISO 18134-3:2023)
Standard ISO 18134-3:2015 opisuje metodo določevanja vlage v analiznem vzorcu s sušenjem vzorca v peči. Uporablja se za splošne analizne vzorce v skladu s standardom EN 14780. Metoda, opisana v tem delu standarda ISO 18134-3:2015, se uporablja za vsa trdna biogoriva. Navedena vsebnost vlage v trdnih biogorivih (pri dobavi) vedno temelji na skupni masi preskusnega vzorca (mokra osnova).
Ker so biogoriva v majhnih zrnih zelo higroskopska, se vsebnost vlage v njih spreminja glede na vlažnost v okolju. Zaradi tega je treba vlažnost uporabljenega dela vzorca določiti sočasno z npr. kalorično vrednostjo, vsebnostjo ogljika in dušika.
OPOMBA: Izraz »vsebnost vlage« je lahko pri uporabi v zvezi z materiali iz biomase zavajajoč, saj neobdelana biomasa pogosto vsebuje različne količine hlapnih snovi (ekstraktov), ki lahko pri določevanju vsebnosti vlage s sušenjem vzorca v peči izhlapijo (glej vira [1] in [2]).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 18134-3:2023
01-september-2023
Nadomešča:
SIST EN ISO 18134-3:2015
Trdna biogoriva - Določevanje vlage - 3. del: Vlaga v splošnem analiznem vzorcu
(ISO 18134-3:2023)
Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis
sample (ISO 18134-3:2023)
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Teil 3: Wassergehalt in
allgemeinen Analysenproben (ISO 18134-3:2023)
Biocombustibles solides - Dosage de la teneur en humidité - Partie 3: Humidité de
l'échantillon pour analyse générale (ISO 18134-3:2023)
Ta slovenski standard je istoveten z: EN ISO 18134-3:2023
ICS:
75.160.40 Biogoriva Biofuels
SIST EN ISO 18134-3:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 18134-3:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 18134-3:2023
EN ISO 18134-3
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 27.190; 75.160.40 Supersedes EN ISO 18134-3:2015
English Version
Solid biofuels - Determination of moisture content - Part 3:
Moisture in general analysis sample (ISO 18134-3:2023)
Biocombustibles solides - Dosage de la teneur en Biogene Festbrennstoffe - Bestimmung des
humidité - Partie 3: Humidité de l'échantillon pour Wassergehaltes - Teil 3: Wassergehalt in allgemeinen
analyse générale (ISO 18134-3:2023) Analysenproben (ISO 18134-3:2023)
This European Standard was approved by CEN on 5 June 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 18134-3:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 18134-3:2023
EN ISO 18134-3:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 18134-3:2023
EN ISO 18134-3:2023 (E)
European foreword
This document (EN ISO 18134-3:2023) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2023, and conflicting national standards
shall be withdrawn at the latest by December 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 18134-3:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 18134-3:2023 has been approved by CEN as EN ISO 18134-3:2023 without any
modification.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.