EN 13232-4:2005/FprA1

Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection

This European Standard determines the interface between moveable parts and the actuation, locking and detection equipment, and defines the basic criteria of switches and crossing with moveable parts in respect of the interface.
It concerns:
·   rules parameters and tolerances for alternative positions of the moveable parts;
·   criteria and limits for the forces which move and restrain the moveable parts.

Bahnanwendungen - Oberbau - Weichen und Kreuzungen - Teil 4: Umstellung, Verriegelung und Lageprüfung

Applications ferroviaires - Voie - Appareils de voie - Partie 4: Manœuvre, blocage et contrôle

Železniške naprave - Zgornji ustroj - Kretnice in križišča - 4. del: Postavljalna naprava in kontrola lege ostrice

General Information

• Status: Not Published
• ICS: 45.080 - Rails and railway components
• ICS: 93.100 - Construction of railways
• Technical Committee: CEN/TC 256 - Railway applications
• Drafting Committee: CEN/TC 256/SC 1/WG 18 - Switches and crossings - Performance and acceptance
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 12-Aug-2011
• Due Date: 24-Jun-2011
• Completion Date: 12-Aug-2011
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/024 - Mandate to CEN/CENELEC/ETSI for programming and standardization in the field of railway equipment
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: SIST EN 13232-4:2005/kFprA1:2011 - Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection

Relations

• Merged Into: EN 13232-4:2005+A1:2011 - Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection
• Effective Date: 18-Jan-2023
• Amends: EN 13232-4:2005 - Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection
• Effective Date: 12-Dec-2009

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2011
äHOH]QLãNHQDSUDYH=JRUQMLXVWURM.UHWQLFHLQNULåLãþDGHO3RVWDYOMDOQD
QDSUDYDLQNRQWURODOHJHRVWULFH
Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and
detection
Bahnanwendungen - Oberbau - Weichen und Kreuzungen - Teil 4: Umstellung,
Verriegelung und Lageprüfung
Applications ferroviaires - Voie - Appareils de voie - Partie 4: Manœuvre, blocage et
contrôle
Ta slovenski standard je istoveten z: EN 13232-4:2005/FprA1
ICS:
45.080 7UDþQLFHLQåHOH]QLãNLGHOL Rails and railway
components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
FINAL DRAFT
EN 13232-4:2005
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2011
ICS 93.100
English Version
Railway applications - Track - Switches and crossings - Part 4:
Actuation, locking and detection
Applications ferroviaires - Voie - Appareils de voie - Partie Bahnanwendungen - Oberbau - Weichen und Kreuzungen -
4: Manœuvre, blocage et contrôle Teil 4: Umstellung, Verriegelung und Lageprüfung
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 13232-4:2005. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13232-4:2005/FprA1:2011: E
worldwide for CEN national Members.

Contents Page
Foreword . 3
1 Modification to the Foreword . 4
2 Modification to Annex ZA . 4

Foreword
This document (EN 13232-4:2005/FprA1:2011) has been prepared by Technical Committee
CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
1 Modification to the Foreword
rd th
Replace the 3 and the 4 paragraphs with the following: "
This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive 2008/57/EC.
F
...